Pyle2 Way Custom Component Speaker System - 6.5” 400 Watt, with Electroplated Plastic Basket, Butyl Rubber Surround & 40 Oz Magnet Structure - Wire Installation Hardware Set Included - PLG6C, Yellow

Got here quickly, kudos to Amazon and fed ex for the super fast delivery I ordered it last Friday evening and received it today, only 2 business days!! Amazon even sent my phone a text message once they confirmed that it had been delivered. These speakers are not the easiest thing to install so if you do not have any experience installing stereo equipment I would push you towards a standard set of 3 or 4 way speakers.. if you know what your doing these speakers are pretty straight forward if you have any knowledge of stereo systems or even common sense. the difficult part is getting it to look good and hide the crossovers (assuming you want to hide them)... now to the product itself.When I opened the box it smelled of Chinese plastic.. these are made in china like everything else. but their build quality is fair/good speakers feel pretty rigid and I see no problems with them holding up for years under normal use.. but on those hot summer days I would be careful not to crank it up too much the plastic seems to be the type that could warp under high heat and movement... unfortunately there is no room in my garage so my install was stuck to the outdoors and being April in Oregon my install was cut to a halt after the first speaker due to me getting soaked in the rain (I have a small car.. not much room to install door speakers with the doors closed)Anyway the side I did looks clean and professionally done and has the sound of a more expensive set these speakers perform at the same level of a 70-80$ pair of speakers from brands like sony, pioneer or kenwood.. keep in mind they are no infinity or kicker but do sound very good and are just about the best bang for the buck you can get!!!Ohh and to the people complaining about the wire that comes with the speakers... the wire that comes with it is thicker than 90% of cars stock audio wiring.. so unless you plan on replacing ALL the audio wire putting larger gauge wire to the speakers is a complete and total waste not to mention these are only ~50 watt RMS speakers you don't need 8 gauge subwoofer wiring to make them work the smaller wire works just fine and they give you more than enough to suffice.I'm very impressed with the improvement of the overall sound quality of my system with only one speaker.. the tweeters are loud and have a good range and can get very loud if you set them up for it and the woofers make a good deal of bass it wont replace a sub but for someone who listens to less bassy music it will do well.... I'm excited to install the other speaker and am anxiously awaiting my pyle audio 4 way speakers for the rear!!!! kudos pyle you guys have come a long way in the past years.So far I'd recommend them to anyone.*UPDATE*Got them both installed and took out my old rotted out rear speakers and these things sound awesome... excellent bass.. far more than expected. At half volume they can vibrate my rear view mirrors to the point they distort and the tweeters hit every high you throw at them... this set is a very good buy!!!

I was hesitant on these, but sure am glad I pulled the trigger! Great value and excellent sound.

To start off, let me just say that I did not buy these to put in my car. I blew out some really nice Sony shelf speakers and didn't want to spend much money replacing them. So I figured some cheap car component speakers would do the trick just fine. I read the reviews here and these seemed pretty decent so I just went for it and ordered them.With the free shipping it arrived at my house in 5 days. Well packaged and everything.Opening up the box, I see everything as expected, plus a ton of extra speaker wires and caged covers for the woofers.As for installation, the woofers fit almost perfectly back into the slot where the 6.5" sony woofers were. I will submit my own photo so everyone can see. The tweeters came with sticky pads so that they can be placed almost anywhere.Now let's move onto the important subject; sound and quality.Many people have complained about build quality. As far as I've seen, the woofers are very sturdy and pretty strong. The woofer itself flexes well and the material is strong. The tweeter on the other hand is not as good. The plastic does feel cheap and wiring is thin but it does work. I've also read that the sound of the tweeter sounds like noise made by foil. After installing the woofers and tweeters, I was not impressed by the sound at all that the tweeters gave off, but after playing the speakers at high volumes for a few hours, the tweeters began sounding more normal and had better quality. And after a few days, the tweeters lost any of the disgusting foil sound.Moving on to the woofer, the quality itself was very good considering I payed less than 40$ for it all. The box that I put the speakers in are very solid and ported. The bass response given by the woofers are strong and the speakers can handle a good amount of power. The bass though has no low end, I'd say they don't reproduce anything below 100Hz, which isn't bad. The bass is there, it's just not very deep. Other than that, the woofer sounds good and the crossover does a good job of managing the signal between the woofers and tweeters.Overall for the price, I'm really impressed with what I was given. After reading many reviews, I expected that the tweeters would be broken, or that the woofers would feel like paper, but no, the overall quality and sound is great for the price. Check out the pictures under the user submitted photos to see my end result.

Second update. They sounded good at first but now sound horrible. One of the tweeters blew under a 30w rms amp and one crossover is only filtering low end so my mid bass is not coming through. Totally garbage. Spend 5 more bucks and buy the pioneers.Updated.I would bump up the rating for the sound quality but almost want to take a star off for company support. I contacted them and have heard nothing back.I ended up fabricating the parts I needed to mount the tweeters and got everything installed. I'm running a bi-amp system with the components and a sub woofer. For the price of these speakers the sound quality is incredible. Im going to add some bass blockers between my amp and the cross over because they still let a bit too much low end through but thats not a big deal. You cant beat the sound quality for this price unless you build them yourself.Customer support:So far disappointed and they are not even installed. First I didnt recieve the surface mounting clip. Next the tweeters came assembled in the flush mount configuration and following the directions to change the mounting setup only made me feel like I was going to break the tweeters. They never came apart to switch configurations. Then the support site just kept looping me back to the same page once I had entered all the information they wanted. The wires for the crossover just slide into it and screw down. I had expected a y connection terminal or a ring connection terminal which I added myself. This rating may go up if the support people get back to me or if I get the tweeters mounted the way I want. Rating may get better if they sound half way decent. Will update next week after giving support a couple days to get back to me.