Tire Levers Pair

⁃ If you are planning to remove bicycle tires from the rims and replace them and/or replace the tubes, this type of tool is a must have. There is no other way to remove these tires as the inner edge is embedded on the rim. ⁃ I am refurbishing an older model barn-find Cannondale 3.0 Criterium SR2000 Race bike and I got it with winter rotted tires. So, I needed these tire levers to remove the tires that were on there. The tires were Continental Superport 700 x 25C on a Sunrims M13 II 6061 alloy 622 x 18mm rim and a Weinmann 622/70 rim ⁃ These tools worked well for the job. I watched a couple of YouTube videos on the removal of tires so that I would have an idea as I had never done this before. I depressed the presta valve piston on the tubes to let out the remaining air. ⁃ I then used one of the tire levers, using the curved hooked side, to clamp the inner edge of the tire, making sure that I was not close to the presta valve. I also made sure not to hook the inner tube itself. ⁃ I then took the other lever and inserted it about 6 inches away from the first lever and hooked the inner edge of the tire. ⁃ I then took the second lever and moved it round the rim till the inner edge was separate from the tire rim. ⁃ I repeated this on the opposite side and the tire was completely free from the rim. ⁃ I made an error (rotation/direction was on wrong side) when installing the one of new Schwalbe Lugano tires 700 x 25C and I used these tire levers to remove the new tire and switch directions/rotation side and it worked perfectly too. ⁃ Would recommend them. Make sure you are gentle and make sure that you clamp the tire edge and avoid the inner tube if necessary.

I recently signed up with Team In Training to do a 60 mile off road mountain bike race. I've ridden bike on solid surface for years, but have never taken the time to learn how to maintain my bike. Now that I'm off road, everything has changed. It wasn't long before I had to change a flat tube. One of my teammates had a three lever set and showed me how to change the tube. At that point, I knew I had to get my own levers. I chose Pedro's because of the high ratings even though these are nothing like what I had just previously used. A couple weeks later, I hit a rock and burst my tube. This time I was on my own and used my new levers. These levers are much thicker and sturdier. One side slides up under the tire, while the other notched side fastens securely on a spoke when needed. Even though I had one less lever, changing the tube was much simpler than using my teammate's three lever set. Then once finished, the levers snap together for convenient storage. If you are looking for a quality set of tire levers, Pedro's bicycle tire levers are an excellent choice. Don't let the lack of a third lever dissuade you, it won't be missed. PROS: Sturdy plastic construction Snaps together for storage Simple to use CONS: None that I can think of

I bought these tire levers for a few reasons. First, because they are thicker than my current tire levers. Not that I have a problem with my tire levers, I simply figured these would be more comfortable to use because they are wider. After using them they are definitely more comfortable and easier to use. Second, the material is a solid plastic that will hold up to the stress of changing tires. Third, I chose these because of their yellow color. My current tire levers are black and I figure the yellow would be easier to find if I dropped one while working on a tire in the field. These tire levers are with the money, and I definitely recommend them.

...and all your dreams will come true! Lol but seriously, these levers work great. They're very nice to my rims, and and still get the tires off fast. Great stuff, the Gold Standard.

good and sturdy, does the job

This is supposedly the "elitist tire lever. - someone on Reddit" It won't break the bank, it is a really sturdy plastic, they seem like they will last a very long time and even so, a second set doesn't set you back much at all. The first time I inserted one into the gap of my tire and rim, it went in really easy, and was able to take the entire tire out of the rim smoothly with the other. It shows signs of wear after first use, even worse after second use. At the parts where the lever meets tire, there's a good chance it's going to leave a rubber skid mark on it. That is what it's supposed to do though, and it hasn't affected the performance of it from my use. Use these or something like the material used, not metal, I can now see why a metal level would damage a rim. TLDR; Good Value, no 'BS' bike tire levers. Lightweight, durable, easy to use. Shows signs of use immediately.

This really is the best tire lever out there in my experience. For those of you who have changed enough tires, I’m sure your fingers have gotten bashed up when a lesser lever slips out while sliding along the rim to pop out the sidewall of a tire. Well, the curve of the Pedro’s tire lever is shaped just perfectly enough that your fingers will thank you. I’ve tried tire levers from many reputable brands, and Pedros really is the one that gets the job done painlessly and efficiently. It really is that good. Test it for yourself. You will agree with every single one of the positive reviews here.

I've had these now for 4 years, and they are still going strong. Between fixing flats on my kid's 20" BMX bike tires, my 700 x 25c road bike and 26" MTB tires, i have never had to go to my backup levers. These stay in my saddle bag and always on the road with me. They're my go to levers when the time comes to change a tube. I've read that others have had issues with breakage, but on a 20" BMX tire, you're putting a lot of force on that lever to get the tire back on the rim. These don't even bend. Mine have worked 100% as expected!

Very strong, light and great price. Perfect for MTB tires

These are very strong plastic, which resist damaging bike rims.

Sturdy, but will not destroy your wheels. Perhaps a bit longer could be better, but these levers will make an outstanding tool out on the trials or in your personal shop at home.

Ich benutze die gelben Reifenheber von Pedro's seit einiger Zeit und bin wirklich zufrieden. Die Materialqualität ist sehr robust und erleichtert das Entfernen der Reifen erheblich. Durch das ergonomische Design liegt es gut in der Hand und rutscht während der Anwendung nicht. Trotz häufiger Nutzung gibt es keinerlei Abnutzung oder Verformung. Ich kann dieses Produkt definitiv jedem empfehlen, der einen praktischen und langlebigen Reifenheber sucht.

Solide efficace , ne se tordent pas.