Specifications: Material: Plastic + Metal Battery: 12V Lithium Ion Batteries Battery Capacity: 13200 mAh Tying Wire Diameter: 0.8mm Tying Wire Length: about 110m Applicable Scope Of Steel Strapping: 6mm - 25mm Knot The Required Time: 0.8 seconds at a time Charger Plug: US two-pin plug (The pictures show CN plug,just ignore it) Tying Wire Installations: 1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover 2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate 3. Insert the head of the wire guide into the tap pipe until it is resisted 4. Cover the plate and fasten the locking piece 5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out 6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out Operating Skills: 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly Package included: 1X Tying Machine 1X Plier 1X Charger 1X Storage Box 1X User Manual 2X Lithium Ion Batteries 2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
Trustpilot
2 weeks ago
1 month ago
