BlueStars [2024 Upgraded] Ultra Durable SKK-7A Stacking Kit Replacement Part Exact Fit for Samsung 27 Inch Front Load Washers and Dryers - Replaces SK-5A SK-5AXAA

Good product. Decent price. Easy install although one of the gray plastic tabs broke when clicking into place. Since screws really hold it and the tabs seemed to only assist during installation I used them. So far so good.

I'm writing this review in case this helps someone else in the future and also because this was a great product at a great price. We purchased our Samsung washer & dryer at Sam's Club. The model numbers are WASHER: WF18H5000AW and DRYER: DV18H5000GW. When I contacted Samsung directly, they told me to purchase the stacking kit #SK-5AXAA for 27 inch front loading machines. I soon discovered that this stacking kit is no longer available. The SKK-7A has apparently taken it's place. From start to finish, the install took 10 minutes. The gray plastic side bars popped right into place. We did not have to remove the legs from the bottom four corners of the dryer as they were shorter than the side bars. The metal brackets for the back of the washer & dryer lined up perfectly with the existing holes and the screws fit perfectly as well. I was surprised that the dryer actually sits back a little bit on top of the washer which was nice. I highly recommend this product and it definitely gave us more space in our laundry room.

I read a lot of the reviews for this part on other vendor sites and was very concerned. Other than a little confusion in the installation instructions, which was resolved by slowing down and actually reading the instructions, it was a piece of cake. The quality of the product was excellent and the holes for the screws aligned perfectly.

Everyone needs to know the TRUTH! The manufacturers make only ONE Samsung stack kit. As new Samsung wash/dry sets ask for different mount kits, they simply change the sticker on the outside of box. (YES, really.) The inside content stays the SAME! We bought 3 different stack boxes from 3 different places, trying to get 1 to really fit our new set. ALL were the same, no matter what they claimed to fit! YOU CAN EXPECT to have someone DRILL a new hole or 2 for each side of the brackets. Forget about the model numbers. If they happen to fit your set, you probably bought something made 5 years ago, or more! Unfortunately, the kits are designed to work well, as long as you drill where they should line up. We took back off to look & be certain the drill would not hit something prior to drilling. These should not claim to FIT. They should be called a UNIVERSAL KIT for stacking Samsung sets. By the way, we kept this 1, due to being the BEST PRICE. Have a drill handy, so you won't be lifting the dryer up & down several times!!! When modified, if needed, they are sturdy, steady, & solid. The KIT includes everything needed except the drill. Forget the model numbers! GO for the best price & expect to adjust the hole placement. (NOTE: Drill in back of the washer or dryer plate. Do not add more holes to the brackets. We attached bracket to our dryer & drilled the washer to fit. It's the easiest way to do it!) Anyway, I believe they don't add more holes to their brackets to actually fit all, because it would weaken the brackets. They have several holes already. Good luck in finding someone handy to help you!

The kit was complete with all hardwear needed for our Samsung 5200 series, 27" machine. It was easy to install and fit perfectly with no alteration needed. The total job was appoxamatly a 20 minute job with the outcome just as we expected. Thanks for offering a Quality product at a very competitive price. Equal to a factory part at a more than $10.00 savings. Very satisfied with my purchase.

Despite the product description saying it fits a wf4* washer, it does not. The wf45* washer requires the wider bracket ( apparently in the SKK-8 kit ). When I was trying to install this, I did see that the instructions refer to 2 sets of brackets. Great, I'm just missing the other set. I set up a return and reorder. Amazon missed its delivery day ( no fault of this vendor ). As it turns out, the instructions are wrong, the description is wrong, this kit ONLY has one size brackets and it WILL NOT fit. #$*!. Canceled the now late delivery.Moral of the story: Don't make Amazon the first stop to get something. Turns out my local Lowes (big box store for those who may not know) had the real Samsung kit IN STOCK, with 2 sets of brackets ( see picture included ). Only a few dollars more and I had it with an easy drive. This could have been done 2 days ago had I not considered Amazon first.

I ordered these to stack my Samsung dryer on top of my Samsung washer. I am very handy when it comes to home improvements so am no novice. However, these came with extremely limited instructions and the instructions referenced a second set of brackets which were not included in my kit. When installing the bottom mounts under the dryer, I could not get the snap pins to align with the holes in the dryer. I tried each one and neither of them would seem to "snap" in place as described in the product description. I eventually aligned them up as best I could and part of the flexible plastic "snap" broke off on each side as I forced them into place. I thought, ok at least I have the screws to attach these mounts. But there was no mention as to which screw to use where so I tried them all until I found one that fit. As for the brackets in the back, none of the screw would work for the dryer. I had to go and buy smaller diameter sheet metal screws to get the brackets installed. All-in-all, the dryer is stacked and everything seems to be holding. I just wonder for how long.

Used to relocate m washer and dryer