sb components Premium Transparent Closed Case for Raspberry Pi 2 Model B Good for Xbmc Users

One of the best and sexiest cases for the raspberry pi. Allows you to use a display under it.

The lid has a slight taper that narrows at the top. This taper causes the side of the lid to presses on the edge of the MMDVM board sitting on the Pi header. This is a Pi B+. I would imagine Pi 3B+ and the MMDVM board e/w OLED would also fit.An SMA Male to SMA Female Connector extends the SMA jack of the MMDVM board just above the surface of the lid. This makes it possible to easily mount the antenna atop the case lid and the antenna secures the mmdvm board through that SMA male/female adapter.

Missing the screws to hold the Raspberry Pi in place. One feature that I really like is that when installed, the micro SD card does not stick outside the case. I have multiple several Raspberries so I don't really need to change the micro SD cards that often.I would recommend this case if you don't need to change the micro SD cards often or at all.

Does not have any screws to mount the Pi 2 in the case and the case does not close well and if you try and pickup by the top it comes off in your hand. First time I have ever purchased a case that needed screws to mount the Pi with and they are not included! I am ordering another case from another supplier that has something other than JUNK! Thanks for the let down!

Other than the annoyance of taking it apart to change SD cards, very good case.

Case is nice but I am not pleased that there is no hole to remove the SD card. You have to take apart the entire case.

I was excited when I ordered the product. I was disappointed to discover even though this is a snap case, and has mounting sockets for the Raspberry Pi, it DOES NOT come with screws to anchor the Raspberry Pi to the case. Other manufacture's cases have screws for mounting the Raspberry Pi.The clear case is also very brittle, and the top snaps off too easily.

È una custodia di buona qualità che fa il lavoro di protezione per il tuo Raspberry PI. Ha anche due supporti in modo da poter metterla dietro o sotto qualcosa per nasconderla in sicurezza.L'unico punto d'attenzione che dovrei fare è che non ci sono aperture per i pin GPIO, quindi se ne hai bisogno devi cercare un'altra.

Bra kvalité! Jag har köpt över 20 olika lådor till Raspberry Pi från denna säljaren och dom är mycket prisvärda!

I genuinely absolutely love this case. It’s really well made, nicely finished and looks great. You don’t need any screws the Pi clips into place. Under board chip and cpu heatsink fit fine too. I don’t think there’s better let alone for the great price. I hope they make one for the Pi4 now.

Das Gehäuse ist aus sprödem transparentem Plastik und würde einen Sturz aus 2 m Höhe auf Fliesen kaum überstehen. Dafür ist es aber auch nicht gedacht; wer das braucht, sollte auf Weichplast-Gehäuse zurückgreifen.Für mich war ein Staub- und Berührschutz für einen auf dem Schrank liegenden Pi wichtig, der rund um die Uhr als Webserver läuft. Dafür ist das Gehäuse ideal geeignet. Man kann sogar einen verkabelten und laufenden Pi in das Gehäuse einsetzen oder herausnehmen, weil sämtliche Anschlusslöcher zwischen den beiden Halbschalen liegen.Entgegen anderer Bewertungen klemmt bei mir der Pi absolut wackelfrei im Gehäuse, das zudem mit eingesetztem Pi schön straff schließt (ohne Pi nicht). Man könnte ihn aber auch mit selbstschneidenden Schrauben sichern, für die es entsprechend ausgeformte Abstandsstücke im Gehäuse gibt. Schrauben liegen nicht bei, aber die typischen Zielgruppen eines Raspberry Pi haben solche sowieso schon zuhauf in der Bastelkiste.

Nice RPi crystal clear case. Brand new, delivered very fast.