Elevate Your Workspace! 🚀
The Rife Dual Monitor Arm Mount Desk Stand is designed for professionals seeking an ergonomic and efficient workspace. It supports monitors from 19" to 32" and features height adjustment, full motion capabilities, and a sturdy mounting system, making it the perfect addition to any modern office setup.
Brand | Rife |
Manufacturer | Rife Technologies, 362, Vardhman Plaza II, J Block, Rajouri Garden, 110027 Delhi, India, 18002120170, Rife Technologies, 362, Vardhman Plaza II, J Block, Rajouri Garden, 110027 Delhi, India, 18002120170, 9899250704 | [email protected] |
Model | PMS |
Model Name | 2msgb |
Product Dimensions | 54 x 30 x 60 cm; 3 kg |
Item model number | PMS |
Compatible Devices | Monitor |
Special Features | dual monitor arm mount |
Number of items | 1 |
Batteries Required | No |
Material | Metal |
Mounting Type | Tabletop Mount |
Has Auto Focus | No |
Programmable Buttons | No |
Manufacturer | Rife Technologies, 362, Vardhman Plaza II, J Block, Rajouri Garden, 110027 Delhi, India, 18002120170 |
Country of Origin | China |
Item Weight | 3 kg |
S**!
💥Detailed Review💥👌 Sturdy and well designed 👍
Product description: ***** Received as describedInstallation: **** Medium Efforts(easy)Build quality : ***** Very GoodValue for money : *****(bought it for 6960 ₹)Box contains:✔️ 2 gas spring arms✔️ Vesa mount pattern 75mm & 100mm✔️ 1 base clamp✔️ 1 base pillar✔️ lots of screws and 2 Allen keysThe good:➕ Easy gas spring adjustment➕ Integrated cable management➕ Dual installation options C clamp/grommet mount➕ Dual motion full monitor➕ Vesa pattern options 75mm/100mmThe bad:➖ little bit costly (but have gas springs)Assembly was fairly straight forward. I had it installed within 15 minutes.First, take it out of the box, the arms are tied down with a tie wrap. As soon as you cut it, the arms will extend, so make sure that you hold the arm and the base is against something. There is a caution sticker attached with instructions.The arms are sturdy and stay in place when I move the monitors. Their range of motion is also really impressive, allowing me to perfectly line up the two screens despite them being different brands. Also, the all-black construction looks so much better than a lot of other models.The base itself was a lot bigger then I expected and did look a lot sturdier as it covered a wider surface area.I used the clamp that however clamp was not able to accommodate the thickness of my desk so compensated with the chunks of boards.I have 2x 25" curve screens and 2x old 16" flat screens. Vesa installation can be used but my monitors were not VESA compatible so I ordered non-VESA mount adapters to accommodate 16" AOC old monitors. It worked like charm. Max screen size that arms could accommodate is 29" weighing 8 kg each.Rotation: • Arm joint attached to pillar = 135° • Mid arm joint = 180° • Vesa joint with arm = 90° • Vesa and monitor = 180°Very impressed by the range of motion that I was able to get out of it and was easy to move with the gas springs.Even gas spring tension can be adjusted according to your requirements.Very solid, versatile, easy to assemble with clear directions, air-pistons fully functional and adjustable. I was impressed with how much space I saved and how neat the whole thing looked!All in all, I am totally happy with the item, the price, and the vendor. I would highly recommend it.
N**L
Does the job well but might not be for everyone.
The product is definitely value for money but there are few things you should consider before you buy.I have used both the single monitor arm and dual monitor arm, and this is a review for the dual monitor arm.The single monitor arm (aluminum finish) is a more quality product but it is also more expensive and can only hold one monitor.Now coming to the dual monitor arm. I would list down pros, cons and things to keep in mind.Pros- Cheap- Sturdy- Easy to assemble.- Easily adjustable and configurable to your need.- Two 23 inch monitors can easily fit and move.Cons- Monitor vibrates a litle when I type- If you use larger monitors(25-27 inch) there won't be much room to adjust, as they will take most of the width capacity.- Compared to single arm monitor, the motion is not that smooth. Needs more effort to move.Things to keep in mind- If the edge of your table is too close to you, the possibilities of adjustments become limited. For example you may not be able to join the two monitors edge to edge.- The farther away the point where you fix the arm to the table, the more room to adjust you'll have. My table's edge was bit close for my comfort, so I bought another single monitor arm. Then I fixed the two arms at far end which gave me lot of movement flexibi.- Considering above first decide whether you should buy a dual monitor arm or two single monitor arms. I would recommended two single monitor arms if you want lot of freedom of movement.
A**H
Very sturdy monitor stand, great to use
I have been using this for 3 years now. I have a 24" monitor mounted on it.It is very easy to adjust monitor position using this. Have not had any issues with it.My only qualm is that there could have been better channels for cable routing across the length of the arm.
A**T
Strong, Sturdy & makes the desk way cleaner
Firstly the arm is built solid. It's heavy & sturdy.Box contains the arm, c clamp, grommet clamp, allan keys, instruction manual, screws.Assembly was easy with the provided manual.It has space for cable routing.The arm can be rotated at any angle & height as far as the arm can stretch.It can be kept at any height with tightened tension.Few things to consider-1. Adequate space for the arm to move or adjust to keep monitor at center otherwise it will stay off-centre2. In case of grommet clamping, make sure the hole is not too big & the base is set flat properly. Otherwise there is chance of stand sagging at the monitor side due to monitor's weight.Overall happy with the purchase. Now the desk looks clean & monitor can be moved anywhere without having to move it along with the base.Can move the monitor away of not need for more desk space.
I**L
Quality is bad, too expensive for materials used amazon baiscs stand is much better value for money
I had returned the first product I got due to quality issues the replacement which came was slightly better but looks like an open box or second hand item its not newThe paint was off at some places, the alen key holes showed marks of use there were minor scratchesIt's made of iron not steel or aluminum has plastic components is many places it's not fully metal as advertisedAmazon basic arm for 2k is much better, sturdier than this 5k, price tag of 5k is just too muchAnd only additional feature this one has is height adjustment, so if you do not frequently change height of monitor multiple times during day I would suggest you go with amazon basicYou have to tighten or loosen at almost each joint using alen key even after couple of days still not been able to figure out how much loose or tight I should keep the joint
S**.
Good product
A bit overpriced is what i feel. But the product is great.The screw mount is a bit disappointing. It rests on a single thin screw. It creates anxiety in itself. Because the monitor on top is a bit expensive. But it is still withholding the entire weight. So i would say I am surprised. But with an eternal anxiety :D
Trustpilot
2 weeks ago
1 month ago