Rockler 921727 Rail Coping Sled 5" x 1-1/4"

Easy to put together and set up.Well made from good materials with a couple of exceptions:The sacrificial block that came with mine was not square so when screwed in place was at a slight angle. Used an offcuts of MDF I had lying around and made a new one in 2 mins. Don't see this as a problem really as if you need one of these you can obviously cut a piece of wood to the size you need!The plastic block that the sacrificial piece screws to was not quite straight due to how it was made. The instructions say to check the block is square before you fit the sacrificial piece and again after. Don't bother checking the first time as you will need to adjust it. If the block was made of machined PVC or similar it would be better but also more expensive.The base is nice and flat and slides on the router table a treat.Handles are nice and big so easy to control.Overall I think this is definitely worth the money and a lot cheaper than most other options on the market.

I gave this Four stars because some nuts and bolts were missing. I was going to send this back, but I needed to get a job done so had to cut and grind some replacement bolts. Other than that this is a brilliant piece of kit and it will save your body parts from injury. I will use this forever more now.. definitely worth buying. Just watch for missing parts.

This sled has worked very well , the only slight niggle was with the wooden fence and sliding locking fence being 25mm thick . When trying to hold narrow timber 40mm and under the clamp will hit the wooden fence first and not clamp down on the work piece , not much of a problem as you can soon make another wooden fence . The ability to push against the router fence and see the cut is much better than using a T slot . It is very fast to set up and simple to use . Just be careful with the pricing as there are a few at different price on the site . It is difficult to see how you could get hurt with this as it keeps you away from the cutter at all times, it is a useful tool and well worth the cost .

Perfecto!! Mis dedos estan a salvo al hacer molduras en la tupu