DEWALT Miter Saw Stand With Wheels, 32-1/2 in. x 60 in Foldable Rollling Stand, Adjustable Height, Durable Steel, 8 ft. Material Support, Universal Mounting Rails (DWX726)

I won't go cover the same ground as other reviewers suffice to say that its a good piece of kit and deserves every star that I've given it. What I would like to cover in my review is the things that other reviewers haven't covered: - its BIG! I stand 6' tall and this reaches my chin when its stood upright. - Its heavy (read well constructed). Which explains why it cost an arm and a foot in shipping costs - the basic unit comes in one piece with assembly required for the lower legs, riser handle and material support rollers - looking at it, it looks a bit flimsy around the wheels. Don't believe your eyes! It's constructed in such a way that there isn't a flimsy piece in it - when closed down, there is a locking bolt that prevents the mechanism from opening while vertical - the material supports use an unusual split tube mechanism to control vertical movement. Not sure how I feel about this - although a universal mounting, the hole spacing on my saw meant that I couldn't mount it dead centre in the tray. - there is a clearly defined front and back. The front has the logo (of course) and the back has a cord minder - when sliding the the material support roller arms on, there is a detent which prevents over extension or removal - comes with a handy onboard hex key. I was unable to find the spanner mentioned in the assembly instructions Just a few things I'd like to mention/expand on: My inability to mount my saw dead centre on the tray is a minor thing. I intend at some point to make an adapter plate which should resolve this. I don't have a De Walt saw but I'm sure if I did, that it would fit perfectly. Further, this trolley/workstation is of such a size that it should cater to even the largest compound mitre saw. one of the material support rollers isn't parallel to the floor. Not sure what to make of this yet but I don't consider it majorly alarming. I chose the De Walt over the Porter Cable version partly because it was minorly cheaper but mainly because the Porter Cable had a number of reviewers complaining about the lifting mechanism locking up. Strange as the PC version appears to be exactly the same design as the De Walt. Before purchasing this, I had considered building my own out of wood. Ultimately I decided not to due to uncertainty about stability. The price of the De Walt was competitive but I really got killed on shipping costs. I'm presently getting together items for constructing my own own router table so will probably revisit the idea for for that project. Given that the router installation will be much lighter and not be under such heavy weight stress, the idea is probably much more practical. Finally, some background info. The concept of a rolling stand is pitched at job site portability. In my case (being a hobby woodworker based in my garage), I felt that my compound mitre saw was a tool that I would use infrequently hence I wanted a scenario where I could readily access it but pack it out of the way when I didn't need it. Now that I've had a bit of experience with this form of portable workstation, I'm keen on doing the the same for my router table (as mentioned) and also (at some point in the future) my table saw upgrade. As an amateur woodworker, I operate out of my garage and that is a space that is rapidly decreasing in size. The idea of easily moved, easily setup workstations has a great deal of appeal. Addendum: All my previous comments stand however my perception of this unit has changed slightly in light of recent discoveries. Let me explain: As mentioned I am planning to upgrade my table saw at some point in the future. I've had my eye on a De Walt DWE7491 for some time but have recently discovered the Metabo version (sorry don't know the model number). The De Walt has a matching stand much like the Rolling Mitre Saw Stand (sold as a separate unit) whereas the Metabo has wheels and four built in legs which unfold from the unit itself. I'm becoming very taken with the Metabo... its compact, centre of gravity is low (basically on the floor) but its still portable. In light of this, I'm beginning to see the Rolling Mitre Saw Stand as using a sledge hammer to crack a nut. As far as I'm aware, no-one makes anything similar to the Metabo concept for Mitre saws so buying one is out of the question. However as an amateur woodworker, making one is quite achievable. Having said all of that, this takes away nothing from this unit. In my opinion, it remains an excellent choice for job site portability and certainly the best one that is commercially available.

I am approaching 84 years old and because of limited space most of my tools need to be moved to use. Some things are becoming more heavy than they used to be. It was getting hard to justify getting this beautiful miter saw up and down by myself. I am constantly looking for ways to make my life easier. This stand fits the bill. It is well built and fairly easy to assemble. Like other reviewers have said the how-too docs are not very helpful. I was able to raise the stand but nothing tells you how to get it to go down. I guess I'm not the only person who has had that problem because Google knew exactly what I was asking for. I have learned more by reading the reviews than the docs. PS I finely found the hex key. Anyway, having this stand takes a load off my mind and my back.

I will say that this stand is not exactly "perfect" for absolutely everything I want it to do, but it's close enough that I would call it the only realistic option for what I was trying to achieve with it. For years I've had a dedicated chop-saw station in my (very small one car garage) shop: saw in the middle, with large work tables projecting from either side, to handle long material. I needed to drastically downsize the footprint of the "shop" duties of the garage space, due to the need to accommodate charging of a newly-acquired electric vehicle. The chop saw situation proved to be the most difficult problem to solve. At first I was somewhat deterred from this stand as an option, I think just due to it being a "job site" stand -- the saw never leaves the garage, so I'm not taking it "onsite" anywhere. But the more I looked at it, the more I realized: yeah, that's probably just about perfect, or close enough. And, alas, it definitely is just what I needed to free-up a TON of space. Now, granted, I am storing the saw on the stand exactly in the way DeWalt tells you not to: standing upright. However, the warnings in the instructions, against doing this, are purely about tipping hazard. And, to be sure, if you stored the saw standing upright, out in free space, it would be disconcertingly wobbly and wouldn't take much to tip it. However, I'm storing it up against two supporting walls. And I made a sort of cleat for the stand arm to rest on. The set-up is absolutely bombproof -- I've pushed on it -- hard -- and it's not going anywhere. So with just a modicum of practical consideration, you can absolutely store the saw standing upright. Do I miss the convenience of being able to walk up and use my chop saw at any given moment, without any set-up or take-down? Yes, a little. But it's not actually nearly as big of a deal as I thought it might be. In fact, there are advantages. By pulling the saw into a more central location (rather than backed-up against a wall), it's a lot easier to clean up after use, and putting the saw away each time encourages me to keep it pristine, rather than just skipping that step. The portability is actually amazing. It's so easy to maneuver into place. Setting it up and taking it down is easy enough. It's very slightly fiddly, and I do worry a tad about long term durability of the lift system, but right now it's fine. What's also unexpectedly great, for me, is the ability to take the saw out of the garage. If I expect to be doing a lot of cutting, I can take it out onto the driveway in order to avoid filling the garage airspace with light dust to settle everywhere. The extension arm feature is fantastic -- it's so nice to have handling of long material built right into the stand, rather than having to go through set-up acrobatics. The one issue I have is that the arms do want to flex down a bit, and the amount of flex depends on how far you have them extended -- which translates in the need to reset the height of the supports. For me this is not a huge problem because my projects tend in the direction of doing a bunch of similar cuts all at once -- rarely do I have the need to be switching back and forth. I have to saw that assembly was a bit fiddly and frustrating. There are certain aspects of the design that I think could use some low-key debugging. If they ever release a Mark II version, and fix a handful of minor annoyances, I'd consider it. It's a great stand and will be my solution until they invent a full sized chop saw station that materializes out of thin air when I need it, then disappears when I'm done :-)

I rarely leave reviews, but for the DeWalt Miter Saw Stand (I have the rolling heavy-duty model), I absolutely have to. Simply put, this is the Cadillac of jobsite equipment. If you are doing any kind of serious trim work, framing, or deck building, this stand is not an optional accessory—it's essential for your health and efficiency. The Back-Saving Difference My biggest motivator for buying this was honestly to save my back. Wrestling a heavy 12-inch sliding miter saw (even with two people sometimes) onto sawhorses or a fixed table is a recipe for a bad day. The genius of the DeWalt system is the pneumatic assist lift. When it’s time to set up, you simply flip the lock, grab the handles, and the saw raises itself into working position with incredible ease. When you’re done, the dampened lowering mechanism means you don't fight gravity; it glides the whole setup back down for easy rolling and storage. It truly eliminates the strain of hoisting and lowering. This feature alone makes it one of my single favorite pieces of equipment I own. Built Like a Tank, Smooth Like a Caddy Beyond the lift mechanism, the build quality is exactly what you'd expect from DeWalt. It's solid, the locking mechanism for the saw brackets is foolproof, and the support arms glide out and lock firmly without any slop. The large wheels handle rough terrain (gravel, lumber scraps, uneven concrete) on a jobsite with no problem. When folded up, it takes up a surprisingly small footprint, yet when deployed, it offers exceptional stability, even when cutting long, heavy stock. If you are on the fence due to the price, stop thinking and buy it. The cost is negligible compared to the lost productivity and pain of a thrown-out back. This stand will pay for itself in hours saved and physical discomfort avoided. Five out of five stars—a must-have tool.

Yes, this is a sturdy, heavy saw stand which ought to fit a wide variety of saws. It works fine for my 30 year-old Hitachi slide saw. I think that others have described this saw stand fairly well, but there are still a bunch of issues that I've come across not mentioned in other reviews, particularly in terms of configuration. First off, the product description completely fails to describe the actual dimensions of the stand with the supports fully extended. The answer is 8' on the nose, so you can indeed trim the end of 8' material and still be balanced, depending on how you locate the saw on the stand. It's important to understand that the stand is asymmetric front-to-back (as seen when you face it to make a cut). This means that it matters which way around you install your saw, i.e. whether you have the wheels to your left or your right. If you want to have the greatest possible amount of reach for the supports, then you'll want to have the wheels on your right. This is because the mounting channel for the supports is not set in the centre of the stand, but the bars at the end of the supports are symmetric. This is shown in my pics. Having the wheels on the right was not a problem for me because of other factors noted below, but at may be for you. It's worth thinking twice before you put everything together, since it's a hassle to unbolt the saw and turn it around. Before you put things together, you may want to think about whether you're left or right handed, whether you like the infeed or outfeed to have more support, and where you have the centre of gravity of the whole assembly. You may or may not want to mount the saw centrally left-to-right on the stand. I didn't want to for a couple of reasons: a) I wanted to have the maximum available support length on the left. This is because I like the infeed on the left, and even though I'm left-handed I operate the saw with my right hand, and want to hold the material I'm cutting mostly with my left. In my case, I was able to set up the saw pushed over to the right enough to give me about 52" of available infeed support on the left. This resulted in a matching reduction in the available maximum length of support on the right. b) I wanted to have the lowest possible centre of gravity when the stand is folded up and standing upright. This makes it easier to move around on its wheels and less likely to fall over when not resting on all fours. If you want to get maximum support out of the in/outfeed supports (to cut the widest possible stock), then you'll probably want to mount the saw as far back as possible on the stand. This is all a result of the design asymmetry mentioned above. For me, this was not a problem, and didn't result in an unacceptable weight distribution, but I imagine that for some saws this might be a problem, especially if its design is particularly back-heavy. Finally, a few criticisms: The product I received had a mis-adjusted release catch, which meant that it would not lift up at all until I fixed it. This is lousy quality control. Yes, anyone getting a stand like this ought to be able to figure out how to adjust it, but they shouldn't have to. I was surprised by how much force was required to raise the stand up. I don't think that my saw is particularly heavy, and the docs keep warning about how it might spring up on you if you're not careful, but I sure don't feel that's a problem for me. A minor note on standing the saw/stand upright. The docs tell you not to do this, but of course, we all will, and they've obviously designed it to be able to do so. Given this, it's annoying that the hoop that the stand rests on in its upright position has no anti-scuff rubber on it. It's a little thing, but you get your nice new stand in official brand-yellow paint, and the tail end is going to get all scratched up on the first day. I should also note that the stand I received was missing the length stop and its associated knob. I was able to get this supplied from DeWalt customer support, but a) Any missing component smacks of poor quality control somewhere in their manufacturing/packaging. b) The missing part took two weeks to arrive. c) It was a pain to deal with the DeWalt customer support web site. In particular, I had to file my claim with the exact missing part number, but this was not shown in the docs supplied with the saw. Finding the part number was non-trivial because I had to find the right exploded parts diagram, for exactly the right version of the stand, and it appears that they've gone through multiple versions. All told, getting the missing parts took a ridiculous amount of time - a big pain that I shouldn't have had to endure for what ought to be thought of as a high-end brand-name product.

What a great ease of use and quality item. I set up my dealt 20v battery on to this after doing some board and batten panels around my house. It was very easy with this table and my miter saw. Great value also. The height and portability is exactly as it was described. Great for DIY'ers!

It’s what you would expect from DeWalt. A very sturdy well built miter saw stand. I bought this for use with my DeWalt 735 Thickness Planer. It does not mount directly on the stand, but I did build a 3/4” plywood base to allow me to attach it in the direction I wanted. I needed to purchase 4- 3” long 5/16” hex bolts, washers and nuts. Used the included hardware to mount my plywood base to the stand then my hardware stuff to mount the planer to the plywood base. The planer weighs 90+lbs so I first tried placing on a cheaper Rigid stand and I could barely get it to stand up by myself. Not with this stand though! The pneumatic assist on this allows stand me to bring it up as a single person safely and fairly easily for 90lbs. The 2 standing height positions is nice for taller people. I am sure this would work for even the heaviest miter saws as it holds this planer with ease. The extension arms are nice for planing longer boards and I just leave the extension tables for the planer attached. The drum shaped T-rests on the extensions do NOT rotate/spin, but they give a smooth surface for work to glide over. I’ve planed around 200 board feet with this setup so far and I am very pleased. Nice to have it portable out of my shop for really long boards and dust/chips too. It is a wide stand so you will need more room in your shop or trailer/truck then some smaller stands. But the smaller stands can’t hold heavy equipment. The mounting brackets are also bolted down to the stand and do not quick release like some of my more portable stands do. With this stand you will mount the tool and leave it on there all the time. Not an issue in my case. Good luck with your selection and hope this review helps a few people make the right decision.

No matter how large or small your shop is, or if you are 100% portable, I recommend this behemoth of a miter saw stand. I have a large Dewalt miter saw sitting on top of this thing and it has made my life a crazy ton easier. Simply having the ability to have the saw at waste level makes this stand worth the money, but being able to have it compact down and be able to store out of the way makes this worth its weight in gold. The stand is a substantial weight, and as such means that any saw sitting on it will be that much more secure. The tube steel around the whole thing makes it very sturdy, and crazy strong. I'm pretty sure that it could carry me around all day and not have an issue at all (I do not suggest this, I suggest you follow all indicated instructions for this tool at all times). The T-Slots are moveable so as to allow for multiple types of saw setups, and as a moveable bench, this thing is amazing. The instructions state that you should never store the saw and stand in an upright position. It is not meant to do so either. There is no flat spot for the stand to properly sit on safely. However, laying it flat and putting it under a bench is quite another subject. Because of how low it sits, lying this thing flat with the saw should allow anyone to be able to make a location to stow this thing, even in a crowded garage (I give you my garage as an example). When you complete the construction of the table I suggest you run it through its paces a couple of times. It can be stiff and some adjustments may need to be made. Never give up on this thing, its simply amazing.

DeWalt tools are my favorite. They are well-built, reliable, and make every job easier. I’ve had a great experience with their products and highly recommend them. If you’re using a DeWalt tool stand and need to lower it, don’t force it. Turn the red locking knob first, lift the handle up, then push down firmly. The hydraulic system will lower the stand smoothly. I hope this tip helps someone using the stand for the first time. Great tools and great quality!

Excelente precio atencion y producto principalmente.Excelente precio atencion y producto principalmente.Excelente precio atencion y producto principalmente.Excelente precio atencion y producto principalmente.

It is expensive for sure but makes using my super heavy miter saw so much more enjoyable and easy to move around and set up

I bought it for my Ridgid miter saw and it mounted on the stand great. You will want to remove the mounting bolts (that secure the saw to the stand) first and then loosen the bolts for the adjustment rails that the saw will sit on and bolt too. Measure the distance of the mounting holes on the saw so you can adjust the mounting rails and holes so they will be roughly where you want them when you lift your saw onto the stand. Then bolt your saw to the rails and snug up the bolts but not tighten so you can move the saw to where you want it to sit on stand. Once you even up the position of the saw on the stand (front to back and side to side), then tighten all of the bolts up. I found it very easy to mount the saw to the stand and I'm pleased with how well it fit and was secured. Heavy duty stand, I highly recommend it.

Especially love the design. The piston really makes it easy and smooth lifting or lowering. I got my DEWALT 12" Double Bevel Sliding Compound Miter Saw on it and its super sturdy. The only down fall to this product is that the feed rollers are a bit higher that the saw so there is a small gap between the saw and the wood. I guess ill have to use spacers to raise the saw up a bit. Don't think I will ever need to buy this again as its built to last, but i would definitely recommend it.