F2 Master Mini Cordless Rotary Tool Kit, NeoPulse Motor, 5 Variable Speed, 25000 RPM, Revostor Hub, 35 Accessories, for 3D Printer Sanding, Polishing, Drilling, Carving, DIY Crafts - Grey

Great item for hobbyists, it comes with a ton of bits for grinding, engraving and polishing, great for anyone who does a little kit bashing or taking sharp edges off projects. Its battery life leaves a little to be desired. could do with being upgraded to a battery above 1000 mAh. The bits are capable of working on a variety of materials including wood, glass, plastic and ceramic. The flashlight on the front is very handy, making it easy to light up those dark areas of your projects. This is truly a fantastic tool. For any hobbyists out there.

Recommended. Nifty piece of kit. All housed inside a carry tube. The tools are magnetised in a rotating holder. The pen is no wider than a permanent marker and you can hold it like a pen to work. Easy changing the 3 speeds. Charging levels are clear to see Straightforward chuck change without needing spanners. Not too noisy. A good weight to it. Smooth metal, perhaps would like a more soft gel texture but that's my personal preference. I bought it in a Prime Day sale for £70, so was good value for money. Not sure I would've justified paying the £90 full price. Depends whether you're specifically looking for a thinner rotary tool. Not tried to see if they're compatible with Dremel tools

It’s a lovely little tool. Easy to use, easy to charge and there are accessories (not Dremel) on Amazon but put the right chuck siz in your search. Comes with a variety of attachments, and as I’m a modeller, into making dioramas using all materials it’s certainly the tool for me. Somewhat irritated that my daughter used it on her fingernails, but such is life!

Really a very good tool. The only rechargeable hobby drill I've bought which has enough torque to actually be useful.

This is a very useful tool.

A very versatile and powerful wee tool It's expensive but worth the investment as the quality build will last for a long time even with a heavy workload. Great for any precision drilling and grinding. You won't be disappointed 😊👍👌

This is a great tool for all table top wargame hobbyists. There is no rotary cutting tool, which is a shame, but it it is a far simpler tool to use than a Dremel. Quick to charge up and it holds it's charge. Easier to store, grab, use and store again. I've been using mine a lot to bevel the edges of Wargame Atlantic miniatures puddle bases, making basing them look much better. If you want to customise your miniatures and bases - I recommend one of these!

I had been looking for a cordless Dremel-style rotary tool for quite some time, and the Fanttik F2 Master seemed to tick all the right boxes. It isn't cheap, but I'm a firm believer in the saying, "Buy cheap, buy twice." After spending a lot of time debating whether I would use it enough to justify the cost, I eventually decided to take the plunge. One concern I had before purchasing was the use of 2.3mm shank bits rather than the more common Dremel-sized accessories. This meant that my existing Dremel bits would not fit. However, after a bit of research, I found several suppliers—mainly catering to the dental and jewellery industries—that stock compatible bits at reasonable prices, so I decided this wasn't a deal-breaker. What I Liked When the F2 Master arrived, I was immediately impressed by the overall presentation, build quality and storage system. 1. Excellent Design The entire system is very well thought out and compact. 2. Portable and Travel-Friendly The tool, storage case and accessories are all neatly contained in a slim package. It has a reassuring weight and quality feel while still being compact enough to fit into a laptop bag or small shoulder bag. 3. Good Selection of Accessories It comes with a useful range of bits, including cutting discs, allowing you to get started immediately. 4. Quality Feel The tool feels solid and well-made. It's roughly the diameter of a whiteboard marker pen and about 200mm long, making it comfortable to hold. 5. Excellent Control Because of its pen-like size and shape, it offers outstanding control for delicate work. I found sanding and grinding fine details on models particularly enjoyable. 6. Exceptionally Quiet This was probably the most impressive aspect. The brushless motor is whisper-quiet with virtually no vibration. When it wasn't actively cutting or sanding, I could barely hear it running at all. What I Didn't Like 1. Non-Standard Bit Size I'm still slightly concerned about the 2.3mm collet system. While compatible bits are available, they are not as widely available as standard Dremel accessories. I also couldn't easily determine whether Fanttik sells additional bit sets directly. 2. Tight-Fitting Bits Some accessories were quite difficult to fully insert into the collet. This may improve with use, but it was noticeable out of the box. 3. Collet Doesn't Hold Bits Securely Enough My biggest frustration was the bit retention system. The knurled tightening collar is quite small, and despite not having particularly large fingers, I never felt I could tighten it sufficiently. No matter how carefully I tightened it, bits would gradually work loose after a few minutes of use. This meant stopping, retightening, restarting the tool, waiting for its startup sequence, and then continuing. While the startup process only takes a few seconds, it quickly becomes frustrating when repeated frequently. It's possible that my particular unit has a faulty collet, but it was certainly disappointing. 4. Lack of Torque While the speed range is impressive, the motor lacks torque. Even when sanding plastic and working on 3D printed models with very light cuts, the motor would noticeably slow if I applied anything more than minimal pressure. 5. Motor Stall Behaviour If too much pressure is applied, the motor stops completely and does not automatically recover when the load is removed. The tool must be switched off and back on again before you can continue. Unfortunately, this made using the supplied cutting discs quite frustrating. The motor frequently stalled despite what I felt was a reasonable amount of pressure. In the end, I gave up using the cutting discs altogether, which was disappointing because cutting capability was one of my main reasons for buying the tool. Final Thoughts Before testing the F2 Master, I fully charged the battery and made a conscious effort not to be overly aggressive with it. I genuinely don't feel my expectations were unreasonable. This leaves me somewhat conflicted. On one hand, I absolutely love the design, size, ergonomics and overall quality feel of the tool. It's beautifully made, incredibly quiet, and offers excellent control for fine-detail work. On the other hand, the issues with bits working loose and the lack of motor torque significantly detract from the experience. It's possible my unit has a faulty collet or another defect, but based on my experience, these are genuine shortcomings. Overall, I really wanted to love this tool, and in many ways I do. However, for the price, I feel there are a few technical issues that need addressing before I could fully recommend it.

I really like this tool. I have been learning how to woodburn for my daughter’s wedding gift. This really helps clean up lines and do all kinds of small things. Good assortment of bits to do different things. It’s not a caring as a dremel but it’s easier to contol. It’s good quality and feels sturdy in you hand. Great addition to my tool kit

Très bon produit, léger et maniable. Large choix d’outils. Seule bémol, pas de témoin de charge. On est prévenu seulement au moment où il n’a plus de batterie. Pas moyen de le vérifier avant.

Great quality, fast shipping, easy to use, works perfectly, highly recommended for anyone needing a reliable product. Do you want me to make it a bit more personal​ with your own experience?

Bellissimo, piccolo, maneggevole, buona coppia, che dire stra soddisfatto... Ho provato ad incidere dei bicchieri e sono venuti benissimo. Anche mio figlio si e divertito, ora abbiamo tutti i bicchieri da caffè disegnati 😬😂 Poi e comodo perché lo puoi portare in giro magari per scolpire dei legni o delle pietre. La batteria, non saprei che dire, l ho caricato quando mi e arrivato, con le robe che ho fatto non si e ancora scaricato, quindi direi ottima

Das Fanttik F2 Master hat mich positiv überrascht. Trotz seiner kompakten Größe bietet das Multifunktionswerkzeug erstaunlich viel Leistung und eignet sich hervorragend für 3D-Druck-Nachbearbeitung, Gravieren, Schleifen, Polieren, Bohren und feine Bastelarbeiten. Der NeoPulse-Motor läuft ruhig und kraftvoll, und die 5 Geschwindigkeitsstufen ermöglichen eine präzise Anpassung an verschiedene Materialien und Anwendungen. Mit bis zu 25.000 U/min steht ausreichend Leistung für detailreiche Arbeiten zur Verfügung. Besonders praktisch sind die 35 mitgelieferten Zubehörteile, sodass man direkt loslegen kann. Der Akku hält erfreulich lange durch, und das Werkzeug liegt dank seines geringen Gewichts sehr angenehm in der Hand. Für die Nachbearbeitung von 3D-Drucken, das Entgraten von PETG- oder PLA-Teilen sowie kleinere Modellbau- und Elektronikprojekte ist das Gerät ideal geeignet. Fazit: Ein hochwertiges, vielseitiges und leistungsstarkes Akku-Multifunktionswerkzeug mit umfangreichem Zubehör. Perfekt für Maker, Modellbauer, 3D-Druck-Enthusiasten und Heimwerker. Klare Kaufempfehlung!