Upgraded Original TS100 Digital OLED Programmable Pocket-size Smart Mini Outdoor Portable Soldering Iron Station Kit Embedded Interface DC5525 Acceleration Sensors STM32 Chip Fast Heat (B2)

Funciona bien, pero de no ser porque compré puntas de soldar adicionales me hubiera resultado inútil. La punta de soldar que traía no funcionó. Con las que compré por separado funciona perfectamente bien.

The TS100 is an excellent little soldering iron and performs very well. This iron heats up lightning fast, works extremely well, and has a nice suite of features available through the onboard software and OLED display. User interface consists of two buttons, A and B, and the operation and menu system is relatively intuitive. The instructions provided were not 100% accurate, but the instruction version shows 1.1 and the out-of-the-box software version installed on the TS100 was version 2.18. The instructions provided a good foundation and I was able to easily figure out the rest with a little trial and error. Although I have not tried it out myself yet, I understand there is also third-party software available for the TS100 which provides some additional features. The provided Allen key for the 1.5mm hex head screws on the body of the TS100 was rather tight and did not work all that well, but I recommend picking up a MIP 1.5mm hex driver to solve this issue (for clarity, the included hex key does work, just not as well as a nice 1.5mm hex driver). UY CHAN did a nice job with this bundle. Reading some other reviews, it appears some people received a 19V 3A power supply, and others a 24V 3A power supply; I received the 24V 3A power supply. Perhaps UY CHAN has recently updated the included power supply to the 24V model. Some people were complaining that the power cord for the power supply is too short. It is, in fact, only about 2-2.5 feet (~0.7m) in length, but you can pick up a 6 or 10 foot (2-3m) laptop power cord for cheap if you need the extra length. That having been said, the overall length of the power supply and power cord is probably close to 6 feet (2m); I found this to be sufficient for my needs. The stand works well, although some may want to put some sort of rubber base or feet on it to keep it from sliding around on a hard surface. The sponge provided with the stand is about 1mm thick and I doubt would work all that well, but I believe most of us are using a dry tip cleaner these days; those who aren't probably already have a much better sponge tip cleaner. I haven't yet used the LiPo power cable with the XT60 connector or the grounding cable, but both are of decent quality and I have no doubts they would do the job. Overall I am very satisfied with this TS100 bundle from UY CHAN and would highly recommend it for your soldering needs.

I was looking for simple soldering iron to replace a cheap one I had that came in a soldering kit for 30$ on amazon. That one died after using it a third time. Therefore, I decided to invest in a decent soldering iron and this one was highly recommended online. I most use a soldering iron to build keyboards and fix small tech. The packaging was pretty nice and it came in 2 box. One containing the soldering iron and the tip. The second had various cable use to power the iron (wall plug and usb c). It felt small, but honestly, I love this size now. The UI is very easy to navigate. Click on the first button and then hold to enable temperature adjustment. It starts at 300C. This soldering iron heats up very quickly and holds it's temp well. You can easily find tips around 15$ on amazon which is awesome! Overall, I understand now why soo many people praise the TS100. For average consumers, this is the go-to soldering iron. There is the TS80 but it is not as powerful and it is more expensive on Amazon. Highly recommended for tech and keyboard enthusiasts!

I have a high end Weller soldering station on my workbench but I was looking for a quality portable soldering iron to carry with me in my RV. After reading many reviews Ian’s going through several cheap $10-$15 irons I thought I’d give the TS-101 a try and boy I’m glad I did! First off, this thing is small, about the size of a thick pencil. Plus the tip easily pulls out of the handle, effectively reducing the size (for storage) to about 3-1/2” long. Second, you can power it up with the included power cube off 110v OR by USB-C! (9-24v) I just use my charger from my Mack book- you need 90w for full output of the iron. Third, the iron heats up very fast. In about 9 seconds, goes into standby/cooldown when no movement is detected and reheats as soon as you pick it up again. Tips are replaceable Software/firmware is upgradable through the same USB-C port. (My iron came shipped with the latest available version) In closing, this is not an inexpensive soldering iron but it is not cheap in quality at all. I highly recommend it and would buy it again.

This iron is great. I’m sure there’s much better options out there but for the average hobbiest this is an awesome choice. Bought for its super small size to help me with some through hole pcb work and it was a pleasure to work with.