bangder Leak Proof Brass Misting Cooling System- Misters for Patio, Gazebos, Backyard Cooling, Pool and Play Areas(33ft tubing)

I was looking for a mister that was better than the stuff you buy at your local hardware store. I saw this one had bigger tubing so it had to be better since it was pushing out so much more water. I didn't even take into account that the pictures show it being used on a much larger scale and not a small patio. I used every single nozzle in the packaging. You can take a shower with how much water it puts out. And that isn't a bad thing, if you have something bigger than a 10x12' patio. I highly recommend this for any outdoor venue. You will not be disappointed.

I really like this product as we are a commercial growing operation, and we are looking to upgrade our watering system. We have been researching many different methods and came across this one. A sample later, and we are extremely impressed with the strength of mist, and the ability to control the output. The ease of which to set up the line, cut to our specs and set up was amazing. Allows for ease of replacement and extension if needed. We would like to find a way to get more of the nozzle fittings rather than the whole kit, so please let us know if possible.

No instructions come with this system, but if you’re halfway smart it’s easy to figure out. Very easy to put together when you do figUte it out. I have a low covered patio here in Phoenix. The misters bring the temp down by at least 15 degrees but I find we get pretty wet. I aim the misters straight out and when there isn’t a breeze, we stay pretty dry. They DO put out a lot of water even when you adjust the nozzles to the finest spray. However, it makes my patio much more enjoyable. I gave it 4 stars because I wish the nozzles had an even finer spray setting. The tubing also blew a hole in it after two months of using it, but it was very easy to repair- took about a minute to cut out the hole, and replace the end where it blew out.

Easy to put together, everything worked great. Got the 20-mister 66-foot configuration and attached it to my yard sprinkler manifold so i could control the misters with my wifi-connected sprinkler controller. Discovered that these 7/16 coax staples are a perfect thing to hang these. They hold the flexible line snugly but not too tight. https://www.amazon.com/Gardner-Bender-PSG-15-Triaxial-Polyethylene/dp/B005XJ0Q5C/

I purchased this kit even after reading the negative reviews. For the price, I thought, "Why not? I'll see for myself. If it doesn't work out, well, I've spent more on worse things." Going in with that attitude helped me accept the results. At the very least, if it didn't work out as I intended it to (a cooling mist to us on our patio), I would have run it along my shrubs in an upward mist for a Disney Jungle Cruise vibe.Assembly is simple enough. My version: (1) Snap adapter and connector together and fit the end of the uncut tubing into it; (2) Fit this directly onto the faucet (or to suggested filter, which I did buy); (3) Eyeball your preferred placement of the nozzles. Note: Based on reviewers' descriptions of "shower," "soaked," "downpour," etc., I ran the tubing along the only two exposed overhang edges of my 18x18 patio and used only THREE mister assemblies (what I'll refer to as the compression tee and nozzle, assembled); (4) Run tubing to the first spot you want a mister. (5) Cut the tubing and fit it into one side of the mister assembly; (6) Fit tubing into the other end of the mister assembly and proceed to your next desired mister spot; (7) Repeat steps 5 and 6 through to your last mister location, where you'll add the end cap. It's in there, you just have to find it.I rated it four stars because it was easy to assemble and install, and it does work as advertised. But make no mistake, it will soak you if you're directly underneath. I can't imagine using all the mister assemblies provided in the kit. We wrapped wire around the hose to direct the spray a little more outward.I was hoping for a finer, more fog-like mist. I wish the manufacturer listed the size of these nozzles (did I miss that?). In my research, I've found that I think I need .008″/.20mm or .012″/.30mm for the effect I'm going for. If I can find them, I hope I'm able to switch them out for those.

System was easy to install. We're using the mister system on our back patio for our plants, but we also like to sit out there with the ceiling fans on, along with the misters. This drops the temperature about ten degrees! Nice!

Your browser does not support HTML5 video.  Have this around my above ground pool. The 9 nozzles are a great mist. However I live in town with good water pressure. Even full blast the last 2 nozzles don't do much. A thicker hose would be nice.Easy to hook up!Okay so it's been a few weeks.. the neighbors love it, I love it. It's been 100 degree index here in Indiana. Turn this bad ass on and boom! Everyone is cool.. it uses hardly any water. Gives you one heck of a tan in the pool! "Redhead speaking" Tip: spay nozzles with vinegar every now and then. I have hard water.

Really nice product, really strong 💪 mist.... A lil to strong for me, I needed a fine mist, but I can't complain, this is a great product