Filament Drying Desiccant (6 Pack) by Slice Engineering | 10X More Powerful Than Silica Gel | Infinitely Rechargeable | Prevent Wet Filament | Fits Perfectly Inside Spools | Made in The USA

I had been buying this brands bulk desiccant but these are really handy and nice and you can dry out the beads in the container.

This is the most efficient dissicant I ever used. Works super fast and dries up to 20%

I've been using these for a while now in my Bambu AMS. They keep the humidity below 10%. I recharge them every time I replace a spool. I recharge them in my air fryer at 400F for 2 hours. I verified that they were recharging by weighing the canisters before and after recharging. BUT - be sure you read the directions and remove the plastic cap by turning it CLOCKWISE - otherwise you'll never get all the little desiccant balls up off your floor!

The stuff is working very very well. I added some cartridges to the AMS above my printer and filled them with this descant. I watched as the humidity dropped from the 40% to 50% range down to 10%. I’m very happy with this. I read somewhere that this type of desiccant was safer to have around than the regular color changing stuff. I don’t know if that’s true or propaganda. You know how “big dessicant” can be.

This is my first desiccant, so I'm not sure if others are any better at keeping filament dry, but this one definitely didn't live up to the hype and for this price it needed to work as advertised. The lids: ugh, the lids come of soooooo easy that if you even drop these on the floor the "threads" unscrew and it's everywhere. And you are NOT going to remember they're in the middle of the filament spool when you take it out of the dryer, so you ARE going to drop them frequently. The dryness: this is my first desiccant, but these were not keeping my creality space pi dry. It's my first dryer too so maybe it's operator error, but I don't think so. I tried cooking these desiccants per instructions to "recharge" them, but that didn't help. The desiccant comes with a little color strip that's supposed to tell you humidity (I think?), but it just stayed the same color whether it was in the dry box or out in the 50% humidity air, so I don't think that thing works either. I'd probably keep it if it weren't so expensive, but at this point I just think it's a junk product. At this price, it should have been a no-brainer that it works, but instead I can't tell if it works at all. I suspect it's a design flaw to have such a small opening into the can for moisture to get in, thus most of the desiccant is dry but is hidden behind the wet desiccant that's closer to the window? I have no idea what's dry and what isn't since this stuff doesn't change color when it moistens, but it's remarkable how little effect this has on the moisture level in the chamber (as reported by the chamber's built-in humidity sensors).

Fits well in my filament rolls, dries my ams quickly and was well priced for how well it works.

These work as intended but two days later I found some that I was able to print that work just as well.

The idea is a good one. But there is no way to know when the desiccant needs regeneration and it when it does, it will be a pain. The cannister is a bit thin and its threaded top fits poorly. The desiccant media/balls inside need to be removed when regenerating them. The balls are a pain to remove and put back into the cannister. A very pricey experiment on my part. You will need to print adapters to fit these in the center of a filament roll. There are no standards on the dimensions of filament rolls.

Absolutely rubbish not even worth one star Dried them numerous times and still make no difference to moist levels. Stay well away