ANYCUBIC Photon Mono 4, Resin 3D Printer with 7'' 10K Mono LCD Screen, Stable LighTurbo Light Source and 70mm/h Fast Printing, Print Volume 6.04'' x 3.42'' x 6.49''

Great printing 90% of the time. I did experience some leveling issues in the back corner, but was not a big deal. The quality of the prints were very good, especially for the price of the printer, although it had a smaller print size than I was expecting, which had me constantly having to adjust the size of my model. Most of the time the prints were very accurate, although some of the time, especially when I was printing larger things I would experience some warping. And in one specific case when I was trying to print a light saber that came in many pieces it straight up just didn’t print a few of them. I don’t know if this was a printer error or a computer error but something happened that caused like half of the parts to not print. The resin vats did have a tendency of breaking, which was annoying, but not too bad, and may have been my own fault. although it did cause me to have to replace the LCD screen, which surprisingly was not that expensive and I think was only like 25 to 50 bucks. One thing I will say is it doesn’t work great after your friend punches it because they don’t know how to play VR and set up their boundary way too close. Although this is not the printer’s fault, it did give me a good chance to see how easy it was to clean seeing as when my friend punched it. It was in the progress of printing. It is very easy to clean, and if you approach it with common sense is not too difficult to take apart and deep clean.

I decided to pick this one as my first printer and I am very pleased with it. The learning curve is a little steep at first but get the hold of it after a few prints. I forgot to clean the vat properly and got some resin hardened on the screen, but I could clean it with 95% alcohol. Is a nice printer that come in a bundle with the cleaning/curing station and is a good pick for starting.

I was a little hesitant about getting into resin printing, but the ANYCUBIC Photon Mono 4 has completely won me over. Right out of the box, setup was quick and straightforward. The instructions were clear, and within an hour, I had my first test print done. The print quality is fantastic—sharp details, smooth surfaces, and minimal layer lines. I’ve printed miniatures, custom parts, and even some intricate models, and everything has turned out beautifully. The monochrome screen speeds up print times while also lasting longer than traditional LCDs, which is a huge plus. I also appreciate how user-friendly this printer is. The resin vat and build plate are easy to clean, and leveling is simple compared to other printers I’ve used. So far, I’ve had zero failed prints, which speaks to how well-calibrated this machine is. If you’re looking for a reliable, high-quality resin printer at a great price, this is definitely the one to get. Highly recommended!

The ANYCUBIC Photon Mono 4 is a bit of a mixed bag, offering professional-grade results paired with some frustrating reliability hurdles. If you are looking for a machine that works perfectly out of the box, this might not be it—but if you’re willing to put in the work, the output is stunning. The Good: Precision and Form Factor Stunning Print Quality: When a print actually finishes, the level of detail is world-class. The resolution on the Mono 4 captures razor-sharp edges and intricate textures that make it perfect for high-detail miniatures or jewelry prototypes. Compact & Quiet: This printer is surprisingly stealthy. It runs very quietly, making it suitable for a home office or a small workspace. It also has a very small footprint, so it won’t hog your entire desk. The Bad: Reliability and Setup High Failure Rate: Getting a successful print feels like a gamble. I’ve experienced frequent print failures, often due to the model not adhering or layers separating. Constant "Dialing In": You cannot rely on default profiles here. I spent a significant amount of time tweaking exposure times, lift speeds, and temperature settings. It requires a lot of trial and error to find the "sweet spot" for success. Hardware Longevity: Most disappointingly, the screen that came with the vat failed within the first week of use. While Anycubic is usually good about replacements, having a critical component die that quickly is a major red flag for quality control.

Thus is a great printer for my first printer it was extremely easy to set up and work right from the start

Liked: I liked the easy setup and high resolution. It prints fast - about twice as fast as my current 4k printer. The print size is large enough to accommodate most prints you'd want, while not being so large that it takes an entire bottle of resin to get to a good level. The bed is very easy to level and feels more secure than my Elegoo Mars 3 with four points to tighten rather than just two. If you have a print where a piece fell off, it give you an option after each print to clean the vat - I love that! Disliked: It feels a little cheap. Very lightweight and the cover is an almost flexible plastic. But, they had to get that price down somehow, am I right? Neither of these things affect print quality, o they don't bother me much. I will probably order another so I can print more, faster.

First couple of prints were great and the software was pretty good however I quickly ran into multiple issues usb port started acting up and would only pick of the files only so often. There is no clear instructions of guide to the settings on the machines everything must be learned through your own research and failure. The cherry on top the resin vat started leaking leaving cured reain on the lcd screen completely ruining the entire thing. I cant really say id recommend especially for beginners into this hobby. Ive started a return on this product but and will be sending it back but not confident ill even get a refund. Which honestly this thing has been such a headache I dont care if rather just not continue looking at it.

Stampante veramente ottima

Hola buen día, adquirí este producto con ustedes, me gustaría que me dieran orientación ya que la impresora no reconoce los archivos de la usb que agregue para imprimir, si reconoce y ya imprimí los archivos muestra que traía la usb Muchas gracias

I'd advice against buying a resin printer as it's too much work, safety wise. Dangerous too. But it delivers quality. Be careful when you are removing your model, I punctured the thin coated film. It's easy to use for most cases. Comes with pen drive too. Performance is good too. Not fast, at the beginning. Value for money for sure. Just be careful. Because resins are dangerous, I did not know that time.

Impressora incr'vel. Tinha uma antiga photon e esta supera em tudo, desde tempo de impressão, qualidade da impressão e extremamente silenciosa (nem parece que está funcionando). Recomendo

Not good