Magic LifeErgonomic Office Chair, 4 Gear Adjustable Home Desk Chair,Adjustable Lumbar Support with Thickened Cushion,3D Headrest & Comfortable Armrest Computer Chair

Very comfortabke chair with very good looking. The quality is high and it got different settings and adjustment. The back support is very strong. Ideal for working from home with Long hours sitting! This chair is much needed! Perfect.

Settling into this chair feels like a cosy embrace after a long day at school. As a primary school teacher, comfort is essential, and this chair is a middle-ground marvel. The assembly was straightforward, which is a blessing since I'm not tech-savvy at all. The dense cushion feels soft yet firm, and I can sit for my evening crafting sessions without feeling the back pain I used to endure. The lumbar support could use some tweaking, as it sits a bit low for my liking, but it's a minor gripe. Adjusting the armrests is a breeze, and they come in handy when I'm working on lesson plans or holding my three-year-old as he insists on watching Peppa Pig with me. This chair moves smoothly across my wooden floors, making it easy to shift around my home office. All in all, this has been a wise investment that balances comfort with cost-effectiveness.

Delivery was late by 2 days. The chair is easy to assemble, definitely ok for just 1 person to put together.The adjustable headrest is very good. The adjustable lumbar support is ok so far. A little fiddly to adjust.Seat cushion is soft and comfortable so I hope it holds up over time.Over all id reccomend it, good value for money.

The media could not be loaded. I've been using this chair for two weeks now, sitting in it for about 9 hours a day at my desk, and I can confidently say it’s the most comfortable office chair I’ve ever had. The support it provides is fantastic, and even after long hours of work, I don’t feel the usual back pain or discomfort I’ve experienced with other chairs.One of the biggest things I was worried about was durability and how well it would hold up, especially since I’m on the heavier side. So far, it hasn’t lost its shape or comfort at all—no sagging, no squeaking, nothing. The cushioning is thick and still feels just as supportive as when I first sat in it.The lumbar support is a game-changer, making a noticeable difference in posture and back strain. The adjustability of the recline and headrest also adds to the overall comfort, allowing me to switch positions throughout the day without feeling stiff.For anyone who spends long hours at a desk and needs a sturdy, supportive, and truly comfortable chair, this is 100% worth it. I honestly wish I had bought it sooner!

The chair was purchased for my daughter. It was easy enough to install. The steps are as below:The main frame and base feet are ABS. The base feet are rocked into the main frame. This takes some force.The gas spring drops in and the castors push in.The mild steel back plate is fed through the slot at the bottom of the ABS backrest and secured with 4x M6x20 bolts (O).Note the orientation of the padded ABS cushion (seat base) and the ABS arms before attaching. The longer part of the arm points towards the front of the cushion.The instructions suggest fitting arms with the single inside bolts first. Both arms can be attached this way before securing with the pair of outer bolts. All bolts are M6x30 (P). Don't over-tighten the bolts as the arms allow some in/out adjustment.Note the orientation of the mild steel tilt control mechanism. The sticker marked "front" faces the front of the cushion. Loosely attach the four M6x20 (N) bolts by hand and align the tilt control on the bottom of the cushion so that it's square. Tighten the bolts and then go around again to make sure they're fully tightened.The tilt control is greasy. Take care that no grease is left on your hands that could mark the rest of the chair.Rock the cushion forwards so that it sits at an angle.Insert the back plate into the gap between the cushion and the tilt control. Loosely attach the three M8x20 (M) bolts. Make sure the back plate is aligned before fully tightening the bolts. Like the arms, the back plate allows some in/out adjustment.Lift and lower the chair on to the base/gas spring. Take care with this as the assembled chair is now heavy.Attach the ABS headrest to the backrest with two M6x20 (Q) bolts.The cover plates K and L can be clipped into the back of the chair to cover the bolt heads. K clips into the backrest above the back plate and L clips into the headrest.The chair is now complete.The headrest can be moved up/down by loosening its bolts, adjusting and re-tightening.Retain the allen-key tool for any future adjustment.The chair is very comfortable. It has slight reclining effect when pushing back. The lumber support is excellent feature.Overall, it’s a lovely chair. Very happy with the purchase.

This office chair has been a fantastic addition to my home office setup. Assembly was straightforward and quick, thanks to the clear instructional video—it took me less than 20 minutes to put together.All the components feel of high quality and durable, giving the chair a premium look and feel. The ergonomic design ensures comfort throughout the workday, with excellent lumbar support and adjustable features that are easy to customize.Overall, this chair has met all my expectations for a professional home office environment. I would recommend it to anyone looking for a reliable, easy-to-assemble chair with excellent comfort and build quality.