AMOLENSilk PLA 3D Printer Filament Bundle, PLA Filament 1.75mm Shiny Multicolor Rainbow Pack, Fast Color Change 3D Printing Filament, Blue Red Yellow Green, 1KG X 2 Spools

The media could not be loaded.  After years of pretty much continuous 3d printing, I am pretty jaded about filaments and how they often lack the same brilliance shown in their promotional photos and videos once I’ve used them at home.Not the case with this filament. It is pretty in the pictures, but it’s way, way more amazing in person. This is officially my favorite filament that I have ever used. It reminds me of the “oil slick rainbows” you sometimes see on the ground after a light rain.This color way is clearly not idea for some projects. It’s extremely busy, and the color change is incredibly short (which is what creates the awesome effect). But for the right prints, it’s so, so good. Added bonus: it does neat things under a black light, as well.The other new colors in the S-series are also pretty, but this is my favorite.Works fine out of the box on Bambu X1C AMS AND Bambu P1S AMS. Also ran the smaller roll direct extrusion on my X1C with no problems. Print with normal generic PLA settings on Bambus.

I really loved this filament been wanting to try it for a while and I’m glad I did the colors are unique and cool patterns!!! Didn’t have any issues letting which is good! I would recommend this filament for sure!!!!

This has got to be the best filament I've used.

I bought this sample pack to test out AMOLEN's products. I've printed a few parts with each sample spool. I used the same bed temperature for each spool, 65C initial layer, 60C for the rest of the print. Winding was good except for the marble, and that was only for some outer windings.Silk Copper: This was my most successful of the four sample materials. I printed a temperature tower, small keychain for my wife and a T-Rex skull. I used a print temperature of 200C for the keychain and skull. Adhesion was great and the parts came off with small amount of effort after the bed cooled. I printed at 0.12mm layer thickness for the skull and it looks amazing! I used 0.2mm layer height for the keychain and tower and they're both smooth with no defects. You'll see some stringing in the temp tower and skull, this might be remedied with some print settings.Silk Gold: This was by far my most difficult material. I tried printing at 200C with 0.3mm nozzle but after about 30 layers it would clog up. I switched to a 0.4mm nozzle and it lasted a little longer. I ended up printing a temp tower after trying IronMan four times. I made some adjustments and semi-successfully printed Iron Man the fifth time. He was still really stringy and the detail wasn't that great, this could be due to scaling it too small. I ended up using a print temp of 215C. This filament was pretty brittle compared to the other three and snapped on me once while switching it out.Marble-like: I didn't have too many issues with this material. I printed a test cube and Minas Tirith (a city from Lord of The Rings) at 200C and it behaved well, but there was quite a bit of stringing on the city that I had to clean up. Otherwise, the part looks great! The spool was wound pretty bad for the outer windings and bound up a bit as the city printed. The inner windings look better though.Glow in the dark: This was the most fun to print with so far. I printed Zero from Nightmare Before Christmas for my daughter. The nose and collar were printed from orange and red PLA. I printed the glow in the dark at 200C and it was REALLY stringy. I super glued the parts together (Gorilla Glue brand) and they stick together great. The material glows really well, especially if it gets direct sunlight.

I feel like I can print anything with this stuff. Barely matters what settings I use on my ender 5, it prints everything way better than any other filament I've used so far.Great adhesion to the bed and it doesn't peel up on the ends while printing at all, but I do have trouble with it sticking to previous layers resulting in an occasional strand that gets drug through the center of the print instead of sticking to the previous layer. For this reason, I set my printer to print extremely slow on the shell layers so the molten pla has more time to stick to the previous layer before it's dragged away.The silk and marble colors all work great, and the glow in the dark prints nicely as well, but it is a little more brittle than the others and I had it ruin a bowden tube on me once.I just wish they had more color and purchase options available in the states that aren't all shiny.

I like how to filament looks, but when I was printing, a small, crystal dragon, taking it off, the build plate was not fun as the end of the tail broke off I wish I can give this four or five stars

Great color. Running great on my Voxelab Aquila S3

I used this to print the popular dragons. The small bits were hard to stick and had to adjust the bed temp to 65deg and get it really clean for it to stick. Slowed the printer way down as well. Overall great quality print after tweaking the settings.

Leider hat das Filament viele querrillen. Da ich mit einem 3d stift arbeite, läuft es nicht durch den stift und stockt immer wieder. Ich musste viel weg schmeißen.

Dieses Filament ist echt super und sieht Toll aus.

Bon filament silk or shiny violet , par contre la couleur est bof bof , un violet qui tire sur du bleu et ca ne fait pas or réellement mais plutôt dans les marron. Ce n est pas mon préféré.

Sehr schönes Filament mit schönem Farbverlauf. Die Haftung ist nicht so perfekt, das Druckbett muss sehr sauber sein.

Ich nutze das Filament mit einem 3D Drucker Chiron. Ich bin damit voll zufrieden.