High Flow Solid Metal 2 Way ├ Type Garden Hose Splitter with Shut-Off Valves, 360 Degree Rotation 3/4" Spigot Faucet Connectors with 2 Extra Silicone Washers

Needed to use an attached sprayer and then fill water buckets, this did exactly what I needed. Strong and easy to use.

I tried a splitter from the store to use with my Oto watering system, but the flow was never strong enough to allow it to work. This does allow the volume needed, and seems to be solidly made.

The unusual geometry with one outlet straight through and one at 90 deg worked great for my application. This is the best splitter I could find with that configuration. Works fine.

No issues at all using this fitting, no leaks seems well made. Would buy again.

Product built well and held up under heavy use.

Works well for connecting two hoses, not sure that device provides full max output. I was looking for full 3/4 hose thru put. While it is more then typical connectors, it is not 3/4

I bought a pair of these to make a nice bypass on my water lines for my RV. Of course, I didn't notice until they arrived that the description frequently mentions they are "metal" and not that they are "brass". I always prefer brass fittings for my water lines because they are clean and long-lasting. Instead, what I received had what appeared to be a brass-like veneer and were VERY lightweight compared to the feel of real brass. To test my suspicion, I scratched the surface, and of course there's a lightly shiny non-brass metal underneath. What's more, you can see (in the second picture attached) there is a distinct difference in color between the "metal" fitting (left) and a true brass 90 (right).It flows nicely and the bypass I made works as intended. The valves are strong and hold pressure as expected. The metal knobs are nice to have (versus plastic) so they hopefully won't break.I think I'm going to keep the fittings long-term, but I want others to know this is potentially deceptive construction and marketing. This company knew what they were doing when they made and sold this product. If you need or prefer real brass, look elsewhere.

In the summer we use a soaker hose for our front bed but we also need to use a regular pointy squirter hose for extra deep watering and also cooling the dog on a hot day. We have two games which are very similar "Dog Hose" and "Irrigation Assistant". At the end of each game the dog is thoroughly cooled down.Our last 2-Way selector didn't work properly because it had a hard attachment collar so it was impossible to keep the taps at the front when we attached it to the wall faucet. This two way from SANTONG has a floating collar so we will be ably to keep the body of the part oriented to the outside while tightening to the wall faucet.The adapter is made from shiny yellow metal but it feels a little bit too light to be traditional brass. However the threads are cut very cleanly and it looks like brass in all other respects. When you turn the tap gates they are stiff but not too stiff. Stiff enough to feel that the internal ball valve is capable of shutting off completely. There are two spare rubber washers. This is important because they are the weakest link and deteriorate faster than the metal parts usually.The 2-Way was quick and easy to install and had no leaks anywhere. One thing to note is that the main attachment collar is thicker than the standard on, say, a standard factory garden hose and I needed to use my big crescent wrench rather than my medium crescent wrench to snug it watertight.This is a very good quality garden hose accessory that will give years of reliable service.