WiberWi Night Stand 3 Drawer Nightstand Dressers for Dedroom Mid-Century Modern Couch Side Table End Table for Living Room Vintage Wood Bedside Table with Drawers&Polished Silver Legs,Walnut

I bought this to sit next to my recliner. Stand being against a wall. I was looking for something to organize all my essentials sitting around my recliner area. Was able to get rid of a smaller end table, a basket with folders/bills, and a cheap three drawer mini plastic drawer unit. It looks beautiful. The drawers have a wood brace you assemble on the bottom of each drawer in the middle for strength. They also pull out and in very smoothly and easily. I have one drawer with a good number of filled folders in it and it is very solid. Also; as mentioned in a previous review make sure the rail on the bottom of each drawer on each side is put on correctly. Otherwise; the drawers will be an inch off like mine were at first. Assembly was easy except for that one error which was my fault for not looking at the picture good enough on the instructions. It also easily hides my surge protector multi outlet strip underneath which was a added plus. I love this stand and it looks very high end.

This nightstand has a modern design with a black faux wood finish on the table accented with chrome feet and handles on the drawers. The nightstand was easy to assemble following the included instructions and took me about 45 minutes to put it together. The nightstand all together is a little on the heavy side however without the drawers in it I was able to lift it and put in place by myself. So far the nightstand seems study however I do with the feet on it were adjustable as I have uneven floors in my house so adjustable feet always help to level out furniture on my floors, but this is not a problem with the table as it was bought knowing the feet were not adjustable. The drawers on the nightstand open/close smoothly however I find them to be a little on the small side. Overall though this nightstand is easy to assemble, so far seems sturdy, has a modern design and nice finishes that give it a high end look however the drawers are a little smaller than I was expecting.

Bought this drawer since I’ll move to a new house. The color fits the new house wall so pick this one. Not a tough one to install. The instructions are easy to learn so I can made it by myself.3 levels can hold my bed stuff and the leg stand up so the robot vacuum can clean the underground.Wood is solid so I’m no worry about any water or heavy stuff on. Good experience. Maybe will attach picture after I organize the room

I have a lot of enjoyable and rewarding DIY furniture experience. I followed and triple checked the instructions and the assembly. I suspect some type of production error as no matter what I do,,,,even trying some things in reverse? The three drawer fronts all sit almost an inch too high when pushed close?...aka the doors don't fit? None of them?? Love to find out it's my error...but?

We were a bit concerned about what the quality of these night tables would be but, they are really well made. Lots of parts and hardware but, the pictorial instructions were very clear and easy to follow. They went together easily and the fit and finish were excellent They are sturdy and very good looking...thank you!

We ordered this to use in our guest bedroom as a nightstand. The drawers are small but they work well for holding a book, glasses and charging cables. The walnut color is very pretty too.

The drawers move smoothly and I love the handles. The walnut finish is very much to my taste. You’ll like the look of this when you’re done.The question to ask yourself before you buy this is, what are you going to put in it? This isn’t going to swallow a whole lot of t-shirts. This is a small and classy piece of furniture for small and classy things. It’s about elegance, not utility. Utility is when your eight children can drop everything they wear in it. Classy is when one of them has it and all of them want one. So if you want classy over utility, go right ahead.Assembly is simple, though you may have to bend the ‘feet’ somewhat to get all the screws in There are 107 fixings with a screw head. The makers have not included a screwdriver, but in this case I don’t mind. I would never use one of the tiny little screwdrivers which are typically provided with such furniture for a project like this. I recommend a screwdriver with a wide handle, so you are less likely to get blisters driving all those screws in.Don’t worry about the metal feet scratching your floors; they have little pads on the bottom. I told my wife the ‘feet’ were like ‘high heels for furniture’; elegant and sparkly.

This night stand looks really nice and is really durable. I have put a heavy 3d printer on it and it does not shake or move around at all. The drawers are the perfect place to store spare parts. Building it was really easy and everything fit together perfectly. The drawers actually stay closed when they are supposed to. I highly recommend it!