EG STARTS 2 Set Chair Mount for Flight Sim Game Joystick, Throttle & Hotas

Use these with NXT Evo sticks and love them. Have also attached their mouse pads to each side too. No complaints.

This product is a cheaper alternative to the Monstertech HOTAS Chair Mount. Mounting plates for the chair are very similar (if not identical) to the Monstertech plates so it should fit many of the same chairs. The vertical posts are 6020 and are sturdy enough for any HOTAS system. The product comes with Universal mounting plates for throttle and stick so should fit any HOTAS system. I had no trouble attaching the Winwing Orion 2 throttle and stick. Everything is very sturdy when attached to the chair. Now for the drawbacks and the reason for just 4 stars. The included instructions are typical of any Chinese product nowadays, relying primarily on pictures to explain things. The package included lots and lots of extra (in other words useless) nuts and bolts. While the parts lists calls them out, the useless pieces are never mentioned again in the rest of the instructions. The instructions call for replacing the bolts that mount the arm to the chair with longer bolts and some spacers that are included in the product. However, only half of the necessary bolts are included; the instructions only call for 4 bolts and 8 are needed. In my installation I didn't need the spacers so I was able to reuse the original bolts. If you need spacers for your installation, then be prepared to buy 4 more M8x35 bolts. The mounts for the joystick and throttle are easily removable if you buy a set of these: https://www.amazon.com/dp/B07KPGKFSS?ref=ppx_yo2ov_dt_b_product_details&th=1. The thumbscrew knobs are something that should have been included and weren't. Overall, this is a decent alternative to the Monstertech chair mount system.

It wasnt designed for my chair, but I was able to use M6 x 25mm petal nut anchors to secure it to the wood panel my chair is built on. Somehow,.it lines up perfectly and comfortably with my armrests. Very solid.

These are great mounts for my joystick and throttle. Easy to install and easy to use. I like that I can completely remove the devices from the chair, leaving only the small mounting brackets near the seat base. Leaves the chair looking professional for when I'm not simming. Wife approved.

First of all didn't fit my chair even though it was in the compatibility list but i made it work. Second while assembling it the included Alan key stripped off in the bolt and became unusable. Third the included bolts for the side risers are to short and almost impossible to get the slot nuts into the correct position. And when you get them in and go to tighten them down the one thread that's actually in the nut it just strips out and the nut falls to the bottom. This was one of the most infuriating assemblies I've ever done worse than and crappie shelf or chair I've ever put together. If you wanna waste 3 or 4 hours of your time and 70 dollars this is the product for you.

Works well and does exactly what it's supposed to do. Many hours in the seat with the hota mounts and im not disappointed. Mounts fit great and bolt right up to the secretlab XL Titan Evo. Highly recommend.

I mounted a virpil warbrd gimbal and winwing orion 2 throttle base to it. The holes didn't quite line up correctly with the virpil onto the place but it still managed to work while the winwing throttle uses the entire mounting arm length. These devices use the same mounting template as a thrustmaster warthog set so I suppose I'm pushing it in regards to compatibility. Mounting the arms to the chair was a nightmare to do solo but I managed by turning the chair upside down to let gravity help. You're trying to keep a steel mounting plate and your chair arm together while sandwiching a spacer all while aligning a bolt to the hole on the chair so I hope you're good at juggling. I also had to remove the foot rest from my chair as it would no longer fit with the new hardware. After getting the parts that interface directly with the chair mounted up, everything else went together as easy as any other hotas mount. One other gripe, because the horizontal arms are only just long enough for a warthog throttle, I could not attach the winwing viper plate to the throttle.

The EG STARTS kit for my T.Flight.HOTAS 4 mounted to my chair, but my office chair is not like the one in their marketing picture, and it only had 4 connecting points to securely fasten the mounting kit to the chair. I’m curious which chairs EG STARTS recommends to customers for this mounting kit?

Ziemlich solide, allerdings nicht so gut für Stühle mit Fußstütze geeignet, habe es aber trotzdem hin bekommen ohne Demontage, erfordert aber etwas Geschick 😅

La idea del producto me parece genial, pero el acabado del producto es terrible, las piezas no quedan firmes y baila toda la estructura. Además, el mecanismo para plegar los soportes funciona fatal. Si aprietas mucho los tornillos, no rota, si los dejas flojos, se desmonta. Mencionar también que la pintura salta toda del roce. Como parte positiva, tengo que decir que venía muy bien empaquetado y es compatible con los modelos de thrustmaster Warthog y el throttle TQS, así como con mi silla Secret Lab. Quizás con unos Hotas más ligeros el resultado sea mejor, pero al menos con los que yo he probado, el resultado ha sido muy malo.

Using these for dual farm sim task sticks. Was weary of flex prior to purchasing, but they are actually well built with very minimal flexing. As mentioned in other reviews, I'd recommend replacing the four bolts that hold the vertical extrusion with M6x16 handle bolts for easier removal/rotation.

Every possible mounting option provided. I'll be able to upgrade from my x52 to a winwing hosas and the existing mounts will fit.

Super cool, fonctionne très bien 👍👍