dalattin 6 inch 5CCT Unltra-Thin LED Recessed Ceiling Light with Junction Box, 2700K/3000K/3500K/4000K/5000K Selectable,Brightness, Dimmable (4)

These look great in our living room. They installed easily to replace our old lights that had burnt out. I like that I can have the 5k bright light and it was easy to set that on the control box. They dim without flickering which I also appreciate.

This recessed light is so easy to install. You hook up the wiring and just snap into place. It sits almost completely flushed to the ceiling. It’s a really sleek seamless look that’s almost noticeable. The light itself is cool and Tone. One unit gives off a great amount of light.

The dalattin 6 inch 5CCT Ultra-Thin LED Recessed Ceiling Lighting kit is a game-changer for home lighting solutions.I recently decided to give my small kitchen a much-needed makeover in the lighting department. The old fixtures were dated and did not provide the brightness I desired, I always felt as if I was prepping meals in a dank dark dungeon.After installing four of these dalattin LED lights, the difference was night and day. The kitchen was transformed with a bright, welcoming light that made the space feel larger and more inviting AND I now could actually see what I was cooking...What sets these lights apart is their 5CCT feature, which stands for 5 Color Correlated Temperature settings. This allows for a range of color temperatures from a warm amber white to a crisp daylight white. Arguably the best feature you could ask for in a lighting fixture!The flexibility to adjust the ambiance of the room is remarkable. Whether I'm hosting a cozy dinner party or need clear visibility for meal prep, these lights offer the versatility to match every occasion and that is a total win in my book!In detail, the installation process of these lights was straightforward and hassle-free. The ultra-thin design meant they could fit into the ceiling without the bulkiness of traditional recessed lights, which came in handy after I saw what was under the sheetrock...This sleek profile is not just aesthetically pleasing but also practical, as it doesn't intrude on the kitchen space. The LED technology is energy-efficient, which is an important mindful consideration for any homeowner who pays attention of their energy consumption and bills, such as I do!Overall, the dalattin 6 inch 5CCT Ultra-Thin LED Recessed Ceiling Lighting kit is an excellent choice for anyone looking to upgrade their lighting. It's simple and loaded with the features a homeowner wants!The combination of its sleek design, adjustable color temperatures, and ease of installation make it a standout product. It's not just a light; it's an enhancement to the quality of life at home.My kitchen now feels like a new room altogether, and it's all thanks to these brilliant lights. I definitely recommend these if you're in the market for new lighting fixtures!

unfortunately, still waiting for my electrician to get these installed for me, but upon inspection, I'm very happy with the quality and look of these (but I"m no expert) ....I trust my electrician to get the job done, but he's so busy.

While shopping on amazon have you ever wondered if all those manufacturers with weird names selling what appears to be the same product, occasionally even utilizing the same images, all at different prices are really the same item just sold under different names? Wonder no more. As a vine member this makes it easy to compare multiple “manufacturer’s” items. I picked up eight different 6” diameter, thin, recessed, 12 watt, 1,050 lumen 2700/3000/3500/4000/5000k dimmable can lights to compare apples to apples. Only the Ensenior was able to do 6000k. This review and pictures will be posted for of these lights.The entire list is composed of icicar (I), ensenior (E), freelicht (F), miootly (M), yankon (Y), akt (A), dalattin (D) and daybetter (DB). Each light appears in the same order of the pictures each time. Also note I mirrored the back image, so they were in the same order when viewed from the front.All but one (M) came with wire connector stored inside the driver box. (M) included them in a separate bag.(Y) (A) (D) (DB) all came with the orange wire nuts.(I) (E) (F) (M) came with 4 space push type connectors. (E) came with the push connectors pre-installed. All others had to be removed from a bag and installed yourself. I prefer clamp style or wire nuts, I would remove or not utilize any of the push connectors.All driver boxes appeared to be identical, except for a sticker and possibly a branded cover plate (E). (D) and (DB) had the same identical sticker; all others differed from one another. note you will need a cable clamp to properly wire each box.All plug connections from the driver to the light at first glance appeared to be similar until I started to test each light for operation. (F) had a slightly larger and (M) had a slightly smaller connector with an o-ring seal. (M) could be utilized in the others, though (F) could not be made to fit. Also any of the others could be made to fit (M). Note these are not the same plugs as the 4” round led lights. 4” lights had a flat spot where these have a tab to align the polarity of the plug.Each light came with a hole template. (Y) (A) (D) (DB) having the same exact one made from a thick almost card stock paper. (I) and (E) also with identical template at just a bit thinner card stock than the previous. (F) came with a thin paper template and (M) had a corrugated paper cardboard one. All lights had multiple templates in the box.(I) (Y) (A) (D) (DB) all had thick gaskets that went between the light and the mounting surface. (E) (F) had a thin almost nonexistent one and (M) did not have a gasket. If you are building new and the inspector is tough, stick with the lights that have the thicker gasket. Energy efficiency code requires the low leak light (which I presume the thicker gasket would make it so).I utilized a 6.125” hole saw specifically for can lights to cut my holes. Even though each unique template was just slightly different than the other, I did not have any issues installing any of the lights. As my set up as temporary and for testing, I did not permanently mount any of the driver boxes. However, when you install you will need to mount the box onto the framing, wire it up utilizing conduit or romex. If utilizing romex you will need a cable clamp. Make sure the box is within 6 to 8 inches of the cut hole or the cable will not reach.When viewed from the light side (M) (Y) (A) (D) (DB) are all identical, (I) (F) have a slightly cream tone and (E) seems to be the whitest. The back reveals that the (Y) (D) (DB) (A) (E) appear to be the same identical light with only (A) (E) having different stickers. (M) (Y) (A) (D) (DB) all had the same protectors on the hold down tabs, (E) was the same construction just a different color. (I) (F) also had the same tab protector, just different colors (these were the cheapest ones and did nothing more than hold the spring together. Each light was held securely in place with no gaps around the edge. No one light is more difficult than another to install.As for light output and color, even though there appears to be in the pictures, there was no visible difference between any of them when set to the same color. You will note the one picture with (E) set at 6000k, it appeared only slightly different than the other 5000k ones in person and it probably would not be noticed in a room with a few feet between lights. Note (E) does have a 5000k setting to match the others.Now the price breakdown.The price per light is as follows:1st (DB) $3.33 (6 pack)2nd (Y) $4.17 (12 pack)3rd place (I) (D) $6.67 (I - 12 pack, D – 12 pack)5th (E) (F) $7.50 (E – 2 pack, F – 6 pack)7th (M) $8.75 (8 pack)8th (A) $11.74 (4 pack)Note (A) did have the fewest lights in the pack, so buying a larger pack may bring the cost per light down. Though (E) came in the largest pack and was tied for #5 in price. Each light was tested and worked. When first setting up, I was sure that one (M) was not working, but it tested to be working later. Note that only (Y) is indicated to have a warranty (5 years).I went out and picked up a cheap dimmer. Yes I paid $20 for a switch I did not need, to test these just for you. Of course I was curious also. I am glad I did because (E) set at 5000k with all the rest had a very different color than all the rest at very low levels. If I switched it to 6000k, it would match the others at 5000k. There was absolutely no flicker from any of the lights even at the lowest light level.All lights receive a 5 star rating from me with the exception of (M) because they did not include a gasket. Even though € (F) had thin ones, they at least provided one.If you find this review useful mark it as such. I get nothing for it, other than I know that people like it and would like to see more. It takes considerable time and effort to set these up and document. If people like them, and if the opportunity arises, I will do more.

I like that this set of ceiling lights came in a four pack. It is perfect for filling the four corners of the living room. The light fixtures allow you to set your favorite color temperature. The set comes with a template so you can draw a circle making it easier to cut the drywall in the ceiling. The slim design and spring clips hold the led fixtures securely in place. I also like that they work on a dimmer switch. Make sure the dimmer switch you purchase is compatible with LED light fixtures. Great value and an easy installation make it easy for me to give these led light fixtures five stars.