Type-R 3D Wavy JDM Mug Style Window Visor Rain Guard Deflector Compatible with 2016-2021 Honda Civic FK4 FK7 FK8 5DR Hatchback LX EX Touring Sport

So I bought this and installed this the other day. I was at first hesitant after reading all the reviews about not fitting correctly, hits the visor when rolling the windows up and down, and even the adhesion not being strong enough. But I loved the look and bought it anyways. When I received it, I first dry fitted it and the passenger rear visor didn’t line up perfectly. I it wasn’t too bad. I also had my wife roll the windows up and down while I held it in place. It did knick the visor on the front passenger side but after adjusting it higher it cleared it and didn’t hit the visor. I also bought 3M Double sided tape from my local auto store and was planning on replacing the tape that was there (from reviews). But as I tried to remove the stock tape, it was really sticky. I even compared the tape on the visor and the 3M I bought as it was just as sticky or even stickier. So I decided not to mess with removing the original tape. I did use a hot gun to heat up the tape to make sure it would stick well. Of course clean the trim on the car really well so no dirt or debris is there. If you don’t have a heat gun, maybe install it on a hot day to warm up the adhesive. In all I was satisfied with this product and it turned out well. I’m able to roll down the windows with no issues. Just make sure to dry fit it and roll the windows up and down to know where to attach it. I love the look!! Maybe I will update in a few months to see how it holds up.

Not a perfect fit but I tried my best to cover the chrome as much as possible. Each piece has its own imperfections regarding to fit but with first glance, it doesn't really matter. It does make my car look really good though. The color of it looks light black when under light, not really pitch black if you know what I mean. I don’t think the adhesive will last though just because of how thin and easily I was able to move it. It’s not 3M so we’ll see in the long run.

Got it in the mail today and had to put it on ASAP & I love it it’s Easy to install all I did was replace the 3M tape it had on it with some new 3M tape from autozone to make sure it won’t fly off sticks great fits perfectly I think it’s a cool new mod to add to the whip and it’s not bulky like other ones on Amazon

I just got these today for my 2019 Honda Civic Hatchback Sport today and before peeling off the adhesive “3M” tape, I made sure that they would line up correctly on my windows and they did. I stuck all four of these on with ease and no problem. I also made sure to give them firm pressure throughout and I tried to see if I could take back off and they are stuck on very well. No window rubbing or hitting. Not sure what other reviews say they are the wrong fitment and they hit. Also saw the video that “Bryan” posted and if you look at the video several times you’ll notice he’s trying to put these on a civic sedan, not a hatch. It says in the description clearly for civic “Hatchback” not sedan. So make sure you are putting these on a hatchback and not a sedan before giving it a bad review! I would highly recommend!

I don’t usually leave reviews but I did due to a safety concern. I want to start by saying that I have had a set of rain guards on every vehicle that I have ever owned. I currently have a set of AWS rain guards on my wife’s minivan, that I installed almost 4 years ago and they are just as secure as the day I installed them. I usually purchase AWS or Vent Visor brands but decided to give these a try. When I received them, I noticed that they were noticeably thinner (the gauge of the plastic) than other manufacturers and the mounting tape was not 3M. I should have sent them back at that point, but I was excited to get them on my new car. Again, I have installed dozens of sets of visors from other manufacturers and cleaned and prepped the mounting surface as I have on every other installation (these instructions were no different). It took less that a week, and the rear passenger visor came loose and almost flew off going down the highway. I had to pull over on the side of the highway and remove it. Needless to say that I promptly removed the remaining 3 visors when I got home. I contacted the seller and asked to send them back for a refund. Of course I was informed that since I had installed them and that they could not give me a refund. Then they proceeded to give me a lengthy explanation as to all of the reasons why they were installed wrong. I would highly recommend purchasing a higher quality set of visors. If you do decide that these are the rain guards that you want, I would definitely suggest removing the mounting tape that comes on them and replace with 3M mounting tape.

Seems to be decent quality and look great. Had issues with the front windows hitting the bottom edge when rolling back up. Tried adjusting and was able to get the passenger side to work without modification. Had to trim off the bottom of the driver's side. Still satisfied given the price.

there are a lot of reviews claiming that the adhesive strip are not 3M and that they will not stick. I was pretty worried about placing my order but the unique design of the visors made me give it a try. First off. I cleaned my trim using Windex and some Rubbing alcohol. it might not be recommended but i wanted to make sure there was zero dirt or grease. I don't have a way to heat the visors so I installed them on a hot day in order to let the glue bake onto the car. So far its been a month and none have fallen off. They look really cool. I did have an issues with the back right visor not being cut correctly. But after i messaged the seller, they promptly sent me a replacement visor. I really like this design because im a huge fan of angles. I really hate the original flat visors that come stock. the wavy visors add a nice touch to the sharp wavy parts of the car.

After a couple of years l had one that was coming off in one place.