Ubanner DS-R01 Full Kit RGB LED Strip Computer Lighting via Magnet with 24 key Remote Controller for Desktop Computer Case Mid Tower Full Tower (5050 SMD 2pcs 18leds 30cm R Series

This LED kit does exactly what you’d expect it to, giving the interior of your computer build a significant improvement aesthetically, or at least it did in my case (no pun intended). You can find my build photo attached, I already had red LED case fans and I set this LED kit to a purple colour which contrasts well from my opinion. I’d also like to briefly mention these products are fulfilled by Amazon, therefore the delivery on this product is blazing fast, actually the fastest I’ve ever experienced. I made my order on a Sunday around 23:58. I received them the next day on Monday and I’m not even an Amazon Prime customer. Delivery aside, RGB Lightning is the craze right now in custom computer builds with even motherboards now offering a RGB header input which allows you to control the colours of your LED kit using specific software (e.g. Asus Aura). If you’re using an older motherboard however, you can still utilise LEDs with two ways: 1. You can purchase a RGB controller and Asus Aura compatible LEDs and control colour via software; or 2. You can buy this (or a similar) kit which is powered using SATA/molex and not a RGB header and control colour using a remote. For anyone wondering, this kit is SATA powered. As others have mentioned, the magnets on the LED strips are not too strong however I find them to be more than adequate. It’s primarily the cable holding the LED strip which causes the LED to fall; I have held the cable in place by hanging it onto the edge of my optical drive trays out of sight, thereafter the magnets are capable of holding the LEDs firmly. There are plenty of colours to chose from with these LEDs, you can also have them fade into every colour (you won’t be able to chose which colours, they rotate all colours). You can also turn the brightness up or down (~7 levels), which is a welcomed feature. The LEDs also turn on when my machine is powered up. Overall I would recommend this kit for anyone looking to light up their PC, especially if your motherboard does not have a RGB header natively. I was impressed with Amazon’s delivery speed, I just had to write a review. Best of luck everyone.

Brilliant! Just what I was after for really nice into my case and after some cable management is very tidy, the magnetic strips Adhered perfectly to my case and brightness Is more than enough. The remote control works well from a distance and changes colours and modes with no effort. Delivered very fast and efficient. Great money for price

If you are after a cheap RGB solution then look no further. The key feature for this lighting kit has to be the magnetic strip, you can snap the strips to anywhere in your case and off you go. The remote control allows you to easily adjust the brightness and switch between the predefined colors. The predefined colors are great however I found the purple to be lacking. The cables are a bit wide if your keen on cable management, so you may need to be careful you have enough width to hide the cables. The main factor that lets this kit down is the lighting modes on the controller, flash, strobe, fade and smooth. Whilst all modes function what isn't clear is you can't set the colors for any of the modes. Flash, stroke and smooth all cycle through the various colors whilst the strobe stays a very light blue shade. All in all the product is great value however you will feel let down if you aren't leaving it one static color. It would be good to see future models allowing the light modes utilize a static color.

This was a very straightforward mod to carry out and gives a very nice finish to the Noctua NF-P14r Redux fan and finally shows off the Noctua cooler. Already have the Ubanner RGB fans and they have proved reliable so far (if only they had a breathe function), so opted to try the led strips kit. So far they are fine. As with all my reviews should any issues occur during the 12 month warranty period will update the review. How to mod your NF-P14r Redux Step one: Remove the NF-P14r Redux fan from the cooler & detach from CPU fan header. Step two: Gauge the positioning of the light strip and do a dry install to check positioning prior to gluing in position. Step three: Apply Loctite Super Glue ULTRA GEL in generous amounts in the middle of the strip my method was to do generous lines along the length then hold in position till bonded, then apply the next line of gel making sure to apply even pressure till a firm bond is achieved all along the strip. Wear disposable gloves if you're messy at applications. Step four: remount the NF-P14r Redux fan to the cooler, reconnect to the CPU fan header, then see to your own cable management. The remote works on the same frequency as all my other led lighting & MSI Dragon RGB GPU support which means you can sync all the LED units so they have the same colour scheme and set the breathe/fade modes to the same colour, the timings are not quite 100% (if am being picky) but damn close to being perfect 97/100. Bear in mind the MSI Dragon is just for aesthetics as the talons and head interefere with the fan blades so this could not be used to correct any GPU sag (mine doesn't have sag due to how it was installed) The magnets stick well enough on steel. But I'd always use Ultra Gel to secure in place if satisfied with the positioning. The remote whas white but that does not affect the working on the unit. Loctite ULTRA GEL link:- https://www.amazon.co.uk/Loctite-Powerflex-Super-Glue-LOCPFG3T/dp/B004E5064M/ref=sr_1_6?crid=3LT0S9UR7D008&keywords=loctite+super+glue+ultra+gel&qid=1572106361&sprefix=loctite+super+glue+u%2Caps%2C153&sr=8-6 My advice always: have one of these with you in your car, toolbox, briefcase, purse as it is incredibly versatile leave it in the package till needed. The mulitcolour LED behind the panel link: https://www.amazon.co.uk/Festnight-Atmosphere-Multicolor-Decoration-Waterproof/dp/B07MVV9PMV/ref=sr_1_19?keywords=Car+Interior+LED+USB+RGB&qid=1572111514&sr=8-19

Lights work, but controller appears to be faulty / or battery dead... Connected via Sata cable and port. Controller doesn't seem to turn off or change the colour of the lights.

Was recommended these,these do job perfectly..

Easy to install, the longest part of this process is to make sure that you hide the wires neatly. The control box for power and the IR receiver is small enough to conceal in the smallest of cases out of view. This is the second unit that I have purchased and it is still going strong. The remote included has 4 various colour patterns from gentle fade to snap changes from colour to colour. You can also choose static colour from the 16 coloured buttons. Its not uber sophisticated but it brightens up your case and shows off your money inside!!

This product basically does what I want, it arrived today and was easy and quick to install. The only real issue was that the extension cable used with one of the strips doesn't fit tightly to the connector and so would easily become separated if you move the case a bit (solved with a bit of electrical tape). The magnets are reasonably strong but again the side connected to the extension cable couldn't sit across the top of the case but was fine down the side. The pulse, fade and other modes all have fixed colours so for example you can't pulse just red etc. however I tend to prefer static colours so this wasn't an issue for me but if you are buying it for these features then be sure it is really what you want. The remote control works well enough just remember to position the receiver in a sensible location for when the case is closed. I've only used it whilst sitting at the desk next to the computer so I can't really comment on the range. At the end of the day at this price point you can't really complain apart from possibly with the exception of the connector issue as it works pretty well and I find it hard to get excited about lights at the end of the day.