Sanus Adjustable Height Wireless Speaker Stands Designed for SONOS ONE, ONE SL, Play:1, and Play:3 - Tool-Free Height Adjust Up to 16" with Built in Cable Management - Single Black

I am really happy with these stands. My speakers look great on them. Also, I love the fact that they are adjustable and match the speakers.

Ok, these come with adapters to fit Sonos speakers but I have HomePods. The stands themselves are 3 screws to assemble, very stable and quite presentable. I bought them because I needed two different heights and I figured the Sonos5 adapter would hold the HomePod. It does, but for under $10 I put together a “mount” that looks way better. See the pics—got the parts at the big box, tool department. It absolutely looks fabulous (to me!), and that’s $10 for the pair. I may paint the adapter white, a can of spray paint will do that well.Parts (1 for each stand):1/4” x 1 1/4” fender washer ($0.12)4” x 1/4” x 5/8” Diablo metal grinding wheel ($3.97)Remove the plastic adapter at the top, replace the adapter with the grinding wheel instead of the supplied adapters. Washer on top of the grinding wheel, replace the screw and voila! A black matte circular adapter that even has a little jump for the HomePod to sit on.CAUTION: this is an unsecured installation so it’s not difficult to knock the HomePod off if you whack it pretty good. It’s not unstable by any means, the stand takes care of that well. But you can knock a HomePod off a table, and you can knock it off this stand too!

I was concerned that since the pole was screwed into the base, that it would be wobbly - totally not true - it is very sturdy. I really like the adjustable feature as the fixed stands were just a couple inches too short. The concave shaped base allows for wires to be fed underneath. One note is that you do have to feed the power cord through the base during assembly and cannot be swapped out without disassembling (not a show stopper). I am using it to hold Sonus One SL speakers which do not have a screw hole to secure it to the stand. The plug that holds the speaker from the bottom works very well. I definitely recommend these stands.

After researching speaker stands, I went with these for my Sonos One white speakers. Purchase price $150. Although on the pricier side, they are very sturdy and look pretty good with high build quality.Set up is fairly straightforward. Will need a screwdriver and make sure to thread the speaker plug through the base before screwing in the post. I put the stand together first and was going to put the speakers on after, ended up having to unscrew it because the plug.In summary you will be very happy with this purchase - high quality although on the pricier side. My sonos one speakers fit perfectly, they do not wobble. There is no concern for them coming off unless you knock the speakers to the floor on purpose.

I bought a 2 pair of the white adjustable stands from WORLD WIDE STEREO. So first off, shout to them! All the other sellers required a week to get them to me, but my Sonos speaker set was going to arrive in 2 days. This seller had a delivery in 2 days for the same price, so I got it from them!Now onto the actual product…PROS:-Super sturdy (the box is kinda heavy, about the weight of 1-2 cases of water)-Great quality-Very simple instructions-Adjustable and comes with a way to hide the cables-Great value for the priceCONS:-The holes for the cables could have been bigger. It’s suppose to fit an Ethernet cable (if you are using one) and the power cable, but I struggled with it when I’m only using a power cable. I made 1-2 scratches on it trying to get the cable through the hole (Note: Use the rubber end of the cable to go in the hole first)-Kind of wasteful in my opinion. It comes with so many extra parts and you won’t even use them all. It varies depending on your floor type and the speaker you’re using.-When adjusting the height for the first time, they each squealed. I’m sure it’s just something from it being so new, because it was such good quality while i packaging-The release trigger could be easier to use when wanting to lower the stands. However, I will say that I won’t be lowering them much since they are placed behind my couch, but I could see this being a con for someone else.Things to note:-You MUST read through all of the steps first because they vary depending on the floor type and the speaker type-Make sure you pull out the pieces you need because you won’t use them allOverall, the quality of these stands really match the quality of Sonos speakers, which is very superior. Because of that, I don’t mind paying the money for a pair of two, which should last a long time. The cons really aren’t bad at all and definitely not dealbreakers for me. I would def buy again if I have to furnish another room with entertainment surround sound for a crisp, clean look.

To be honest, I already had 1 for one of my "Sonos One" rear speakers (the other was mounted to a wall). When my wife and I moved to our new home I needed a second stand. The base plate is really heavy and makes for a sturdy speaker stand. It's well made and easy to assemble. If I could suggest anything to the manufacturer's it would be to add some words in the form of these things the kids today call "SENTENCES", to your assembly instructions instead of just pictures. Not everyone is handy... actually, most are not able to tell one type of screwdriver from another.-Pete W.

I have a Sonos system with the Sonos, one speakers as my surrounds. I ordered some less expensive stands off Amazon and they were cheaper and non-adjustable. I returned them and bought these. These are beefy stands, they conceal the wires inside the, and they feel extremely well-made. They have multiple mounts in the packaging that allow you to attach a variety of speakers. There is a bracket that directly fits the base of the Sonos one so it’s a factory fit.

Well made, fairly easy to assemble and install and nicely designed stands. Recommended for these Sonos speakers.

Stability and an ability to adjust the height was a must for me, and WSSA2-W1 had it all.My Sonos One SL sit sturdy on the mount.

Excelente compra!

This stand met all my expectations! Delivery was reasonably quick and assembly was well explained and therefore easily accomplished in less than 15 minutes. The stand supports my Sonos One SL speakers perfectly and provides a well balanced, sturdy support. The base is heavy - which is important for the speaker to stand steadily - and the cables are very nicely hidden in the support. My only hesitation is the price - but I would pay it again to get these stands as they are high quality! I don't mind paying for good quality, which is why I am still giving 5/5 for these stands... regardless of the price in this case. I would purchase this again.

très bon produit facile à monter très stable, ajustable à la hauteur souhaitée, dans mon cas, de 65 cm à 110 cm.je le trouve également solide

easy to assemble and very steady and looks great , fast delivery , well done