Amico 52 Inch White Low Profile Ceiling Fans with Lights and Remote

I’m very happy with this ceiling fan! It looks modern and sleek, and the black finish fits perfectly with my room. Installation was straightforward, and the remote control is very convenient. The fan is surprisingly quiet, even on the highest speed, and it provides excellent airflow. The built-in light is bright, dimmable, and the different color temperature settings make it easy to create the perfect atmosphere. Overall, this is a great value for the price. I highly recommend it!

I recently installed the Amico Fan, and it exceeded my expectations in every way. The build quality is solid and feels premium, with smooth operation and reliable performance. Installation was surprisingly simple — the instructions were clear, and everything fit together without hassle. Customer service was another standout. The team was responsive, friendly, and genuinely committed to making sure everything went smoothly. On top of all that, the fan looks fantastic. Its clean, modern appearance adds a polished touch to the room. Overall, the Amico Fan delivers great value and an excellent experience from start to finish. Update: During installation the wireless unit for remote was faulty kept turning fan on by itself, I reached out to Amico customer support they immediately dispatched a replacement unit, which worked great. They reached out to confirm if everything was working. Update: Amico Support reached out six months later to confirm if everything is still working fine with the fan not only that they offered to extend the warranty of the fan and various other benefits. This is absolutely the best customer service I have seen.

I’m very happy with this ceiling fan. It looks modern and stylish, and the low-profile design fits perfectly without taking up too much space. The fan runs quietly while providing great airflow, and the light is bright with useful color and dimming options. I also really like the convenience of the remote control and the reversible blades, which give you two different looks. Overall, it feels well made, works great, and was an excellent addition to the room. Highly recommended!

We lost our previous ceiling fans due to several power outages and they were no longer available so I ordered these fans as a replacement. The fans look nice, are low profile, and create adequate airflow. Unfortunately the list of negatives outweigh the positives. I purchased two of these fans and both have the same issues. The first problem is that, at fan speed 3 and above, the fans make an irritating clicking noise from being ever so slightly out of balance. The fans are mounted to proper ceiling fan mounting brackets. This clicking was present in 1 fan immediately, but didn't happen to the second fan until about a week later. I spent about an hour trying to balance the first fan, I've had success with fan balancing kits on past fans, but I couldn't make any considerable improvements here. The fans are very close to being balanced but even just a VERY small amount of wobble causes the clicking noise. The clicking comes from the mounting plate when it pulls away from the ceiling paint. The mounting plate is plastic and is inherently flexible. When the fan rotates the edge of the mounting plate flexes away from the ceiling, not even enough for a sheet of paper to slide between the mounting plate and the ceiling, but this is enough to produce a clicking noise when the plate separates from the ceiling paint which it very lightly sticks to. Because I was not able to resolve the clicking by balancing the fans what I ended up doing is removing the fan from the ceiling, loosening the mounting plate, and sliding parchment paper, cut into a ring shape, between the fan mounting plate and the ceiling. Neither the mounting plate or the ceiling paint stick to the parchment paper so if the mounting plate flexes away the unsticking sound isn't present. I reinstalled the fan to the mounting plate. The base of the fan surrounds the mounting plate but there is a small gap between the base of the fan and the ceiling, smaller than 1/8th inch. I carefully pressed 3/8", highly compressible, foam backer rod into the gap around the base. This really firmed up the connection to the ceiling and the clicking sounds from the imbalanced fan have been resolved. The second problem, which is the biggest issue because I cannot resolve it myself, is that the fans have a mind of their own. It took me a while to pin this down because I thought my wife may be pressing the wrong buttons on the fans wireless remotes. We keep the wall switch(normal, NOT dimmable) constantly on so that we can operate the fans using their remotes. At any given time the fans will change settings on there own. This includes speeding up, slowing down(we don't use the function that does this deliberately), the blade direction reversing, and even turning on or off on their own. We typically set the fans to run at speed 3 with the blade direction pushing air down. We live in the subtropics and one of the fans is mounted over our bed(why the clicking sound couldn't be ignored) and we open our windows at night. The fan needs to run properly through the night to stay comfortable. Frequently the fan over our bed will slow down or, even more often, reverse direction and I end up waking up in the morning sweating and uncomfortable from the lack of airflow. When the fan speeds up to speed 6 it actually wakes me up because the turbulence created at the edge of the fan blade is actually quite loud above speed 3. By the next morning the fans are almost never on the same setting as they were set to when we went to sleep. All that being said, the fans look nice, are a nice size, and quietly move a nice amount of air when they are at my desired setting. I have been using the fans for about a month and a half and probably would have tolerated the shortcomings of the fans indefinitely but now my wife is voicing complaints about the fans constantly changing settings so I figured it was time to share our experience.

I love these fans. I started with one for my office and Noel’s I have 3. They are inexpensive and look great. They are easy and quick to install. The installation instructions are easy to follow along and they go into detail and even include pictures to make things as easy as possible. The multiple fan speed settings are nice to have as well as all the different light options including softness and dimming options. Best combination of quality and cost efficiency!

I would give this five stars but I just installed it and have no experience with the reliability. However, I am very impressed with it so far. During installation I was a dismayed to see that it was mostly plastic, but it is so much lighter than the old fan, it seems a good trade off. Easy to install. The wire nuts are small to fit inside with the receiver and solid copper hose wires, but work well. The instruction booklet is finished with glossy pages and has IKEA-like picture instructions. Each section has a sentence of encouragement which appear to be the only translations from Chinese and better than most. I love the look and the fact that it is only three blades. It moves more air on low than our old five-blade with a down rod. At lower speeds, I can't even her it. At higher speeds, it sounds more like the air moving rather than the machine itself. The wind mode is an amusing option. The light is excellent. Dims to a very low level and at it's brightest is as good as our LED floor lamp. Overall, an excellent fan. Hope it lasts!

I bought this fan from Amazon a few months ago and had my electrician install it in my daughter's bedroom. While overall the installation was straightforward, within a couple of days we noticed the fan was going on by itself. After eliminating all external causes by checking with the adjacent rooms and even my neighbors, we reached out to the company by email, and they responded right away by suggesting sending us a new receiver and already paired remote. After receiving the package and having my handyman install the receiver, everything has been working perfectly. Another thing which we noticed was the noise when fan was running at level 3 and higher. After narrowing down everything else, we noticed the base was rubbing off the ceiling when the blades were moving, so we applied a two-sided tape to the ceiling and the back of the fan which resolved the issue. Overall, it looks nice, it is low profile and the light brightness is very good. The multiple fan speeds can cool any room size and the ability to adjust the brightness, and the light color are great features.

I installed two of these in my garage and the fans seem to be of decent quality. Very easy to assemble and install. Two things I will mention: First, there is a design flaw in these fans. The fan assembly attaches to the ceiling mount ring by sliding into some notches and then rotating about 1/8 turn to lock it into place. Then there is one recessed screw hole on the side of the fan collar where you install a small screw to keep the fan assembly in place and prevent it from possibly wiggling out of the notches and falling out. The problem is that for both of fans that I installed, the fans vibrate enough at speeds 3 through 6 that they wobbles slightly and this makes a noticeable clicking noise. Luckily the mounting plate has 4 screw holes in so that you can position the fan in any one of 4 positions to slide the fan assembly into the notches and turn it. So I used the extra screw that came with the fan to screw into the opposite side of the mounting plate. I drilled a hole through the actual fan assembly to do this. This screw does not sit recessed like the (only) one they intend for you to install, but it's a small screw head and it's right at the ceiling so it's not that noticeable. This fan should have been designed with 4 recessed screw holes in the fan assembly hub so that you can easily install 4 screws to hold it into place. One screw will certainly prevent the fan from vibrating or rotating out of the notches, but it does not prevent the fan from vibrating and wiggling a small amount--the fitment between the fan assembly hub and mounting plate is not extremely snug, so there is plenty of room for the fan to wiggle around in those notches. Anyway, installing the second screw stopped the wiggling and noise I was experiencing with both fans. If the problem returns, I plan to install two additional screws in the other two holes in the mounting plate just like I did for the second screw. On a related note regarding the small screw that prevents the fan assembly from wiggling around in the mounting plate: that screw is silver colored (zinc plated I believe), while the rest of the entire fan is black. That screw should be black, because it is exposed and you easily notice it if you look up at the fan. I used a black sharpie marker to color the head of the screw before installing and it's almost invisible now. Same goes for the screws that hold the blades on--those screws should ideally be black, but they are just standard silver (zinc coated) screws. Of course, those screws face upwards toward the ceiling so in general you would never possibly see those screws (unless you're installing the fans where you have an overlook or maybe stairs where you would be able to see the tops (as installed) of the blades. It would just be nice if the exposed screws were black instead of silver. Second, of less concern to me, is that each time you turn the fan itself (not the light) on and the fans start to spin, it pauses for a second or two before moving. When it does move, it briefly starts to spin in the opposite direction and then immediately switches and starts spinning in the correct direction. From that point forward, it spins as you would expect. I suppose this is by design but it seems a little odd to me.

Una vez instalado, No funciono el ventilador, tienen algún servicio de reparación o sustitución ?

تم ارجاعها واسترداد المبلغ البضاعه نفسها جميله 🙄

not suitable for the middle east because it's 120V

Solo tienen 4 meses de uso y ya se descompuso, que pena porque se veía bueno.

Quiet, nice look, work’s great