Edge Supply Walnut Wood Veneer Sheet Flat Cut, 24” x 96”, Non Glued, 10 mil Paper Back, “A” Grade Veneer Face – Easy to Apply Walnut Veneer Sheet – Veneer Sheets for Restoration of Furniture

Seems to be OK. Not real thick but thick enough to handle easily and make for a nice looking panel

This is very nice high quality. Project turned out great!

Excellent veneer. Perfectly shipped. Excellent color and grain. I will buy this again

Looks wonderful! Coated the plywood substrate with Titebond III using a roller brush. Placed the veneer on top and clamped a piece of plywood on top for 30 minutes. Ran my iron with parchment paper over the veneer slowly. Gently sanded and coated with Danish oil. Cut it into shelves (used a 1.5" veneer edging for the front). Look better than the purchased piece sitting next to them.

Veneer was exactly as described. It has a very nice grain pattern and nice paper backing. It worked well for my project with curved surfaces.

I purchased two sheets of veneer. The first was great, it had a varied and continuous grain pattern across the whole sheet and the color was deep enough to get away with only needing to oil to finish.The second sheet was awful. It was extremely pale in color, and is composed of several 4" wide and 2' long strips that are glued together. The glue joints are extremely obvious, and the grain makes a horrible repeating pattern across the sheet. I had to stain the wood to achieve the darker color pictured.Would not recommend

My initial thoughts were, this stuff is too flimsy. After flattening as the instructions stated and gluing up my first shelf (I veneered some new cabinets I built out of MDF) I realized this stuff is pretty good. It's user friendly and really looks good. Even when gluing up the veneer with a seam, the seams flushed up nicely and you can't tell there are 2 peices of veneer. You can sand lightly, it sands nicely I was also pleased to see how well it took finishing oil. I was so pleased, I just purchased 3 more rolls of the 2ftx8ft paperback veneer. I used this on the shelves and I painted the cabinet carcasses dark charcoal gray, the shelves look like solid walnut, I'm impressed. The trick is using just the right amount of glue if you get the paperback. Not too much, not too little. Too much glue and it will ripple the veneer and ruin the finished product. This product gave me the look I had envisioned. Thanks

Didn t like the color difference in wood. Good thing I stained them with special walnut.