AAAwaveThe Sluice V.2 12 GPU Mining Rig Frame and 4 pcs of Stacking Brackets (Black, 2 Frames)

The frame might take some time to assembly, but if you are DIY handy, it's not a bad assembly, even on a first try. The manufacturer youtube channel is a good choice for instruction

Product came well packaged. The instructions were OK. They were obviously translated into English so the words were completely worthless. Pictures and diagrams could be better but, you if you take your time and logically think things through, it goes together fairly easily. The rig is very sturdy and the pieces are precision cut. Fit and finish is very good.The only issue I had (which is mentioned by some other reviewers as well) was the mounting points for my PCI-E risers were a bit off for the ones I had purchased. I was able to get all four points on each riser attached, but you have to leave both all of the stand-offs very loose to make it work. The stand-offs end up being a bit angled if you do this, but everything can be attached without the need to redrill holes.So half a start off for OK directions and another half star for bad PCI-E risers mounting points.

So you know, this thing will take forever to put together, there are instructions but they are not the easiest to follow. But if you did your legos as a kid it isn't too hard to figure out. In addition, the riser holes are just barely too far apart, they must drill them for the risers that they provide because my Rosewill, Longrunner and EBK risers all do not match up. But once it is set up properly and to your liking, it appears to be sturdy and survived me moving it, fully loaded with 12 cards and all, to a different room on a different floor.

As the reviews say the frame is a little tedious to put together. Lots of little screws, nuts, and bolts. AAA Wave has put out a great 'How To' video on Youtube that I found that really helped because as mentioned, the instructions aren't much help. I will buy again for another 6 card rig.

Its HARD to assemble... And I'm not someone who backs down easily.. I've rebuild 1000's of computers, 100's of Car Engines, and work as an electronic technician professionally, and this thing is just BAD!!! It doesn't line up correctly because the parts are not cut evenly.. The entire thing is UNSTABLE. The cheap hardware it comes with is so poorly machined, that the parts bind together in assembly making it impossible to make fine adjustments without disassembling 1/2 of what you just put together.. It's made with the cheapest materials so nothing is able to be properly torqued down without stripping out.I would have definitely sent it back, except for that I also needed that type of slotted alum rods for another project, and I couldn't buy them cheaper ANYWAY else.. It's literally cheaper to buy this kit for the alum, then it is to buy the alum rods themselves...

Instructions are hard to follow, but once you get the idea you can build it however you want to. GPU's sit neatly and so far so good..

I will first say that the price point is better than others out there. On the other hand, you get what you pay for.Upon opening box, there is thousands of little metals shavings everywhere on everything. This can be very dangerous if you were to rub your eye after handling anything in that box. Edges are very sharp also so be careful if you decide to buy this. It's was also a quality control issue.Onto the directions paper that is included. It is a epic fail on directions and worse is that several sentences do not make sense and words are misspelled everywhere and abbreviationsAfter several hours of assembling one of the 12GPU Frames, it was clear positioning of parts would be critical to get cables from psu to reach cards depending on how you utilize the shelves and your layout.My suggestion is, spend 20% more on a frame and save yourself frustration and time especially if you are using 8 cards instead of 12. I also bought another brand frame, the Veddha for 8 cards and it is built well and would suggest that one instead of this one if you have 8 cards and not 12.I'm going to be returning 2 of these 12GPU Frames.Hope this helps some others with researching what would work for them.

Love this thing. The only thing is that there was a pretty long scratch on the plastic that holds the motherboard and power. It looks like whoever added the graphic to the plexi also scratched it. Power supply and motherboard pretty much hide it but would be real upset if not.The shipping box was well packaged, a box within another box.All parts were included all hardward arrived fine.It's pretty cool and looks great but need to make sure that the factory is careful with the plexiglass.

Purchased because the price was fair. I was surprised by the quality. Personally I found the installation fairly easy, we did go to the website and watch the video. Very happy with the overall quality.

Works as promised. Easy to set up... Takes under an hour...

looks, great, assembles easily, sturdy. Would buy again.