Flashforge Adventurer 5M Pro 3D Printers with High-speed Printing,Max 600mm/s, Rapid Heating with 280° Nozzle,Internal & External Circulation Dual Air Filtration,Achieve Smooth & Effortless Printing

Still to this day Its a solid printer!After my1200hours of printer I have updated and upgraded only minor things. Its 1500 hours and still running. I also got 2 for my school as D&T teacher and business account get it cheaper £330 it was and £305 now with the discounted price.I have updated the belt with I hated but it doesn't make much of a difference! I used to think its going to be a headache but it was 20min with NO disassembly required! I kid you not.As a High speed printer it’s very fast and it has a lot of torque! So the standard Belt was made to break! The printer will outlive the belt.Fastest way to change the belt is to undo X first from both sides of the printhead, glue one side to the new belt, then just pull through and feed the new one in place. Its that easy and its only 1.5/1.3meters of belt required for X and same goes for Y axes.Printable have a good 5M/5MPro communities as well as Thingyverse. Fot new tool head cooler and such.I advise you to go on Alibaba for part cooling fan if you break it like me or for toolhead fan. Its only £2/£3 each on their and no where to be found on Amazon or Temu. It works a charm.The top lid extension is a must! (You now if you know)Extended Bowden tube and replacement is a must! (Stock one is fragile and incompetent) -grey with 2mm inner bore is a good option.Flexible bed - many options for 256x256 same as many others (cheaper on Aliexpress)And printouts for grills and others such as part cooling clip for safety and long prints is a must if you like tinkering!I tried others such as 2 Auxiliary fans which is a waste of time and money! Do not do it.You could get Opensource Klipper firmware update, BUT stock one is really solid and has updates regularly.You can get better silicon feet than stock ones which are only mentioned to be anti-slip, it does eat up much of the vibrations.Future upgrades I am looking forward to getting a 150x150mm 15mm thich iron plate to weigh down the printer under the bed at the bottom of the cavity as the printer is too light and much the inertia if being transferred rather than disposed off.I want to appreciate and celebrate 🥳 the awesome 3D printer that is both usable and easy to use by far from any other project printers like Creality K1 with an unbeatable price range.I want to shout out to Flashforge for future upgrades and options for UK schools. For inspectors and obligation issues.Latching doors, emergency 🚨 stop button! Filter for intake!This meets 2 levels of safety in the classroom and workshops. And very easy fixes.I have designed and will be releasing the 5Mpro latching for both doors on Thingyverse.The emergency Stop button integration which is basically replacing the switch on the back with a push to break latching button with red and yellow colour. It would be awesome if there was a printable version with a simple limit switch embedded for everyone to tinker!

Well I must say this thing is amazing. I have been 3d printing for many years starting with an Ender 3, then a Sunlu s8, finally a Biqu B1, compared to them this thing is in a league of it's own, very fast, great quality and colour changing too. I advise the first print sohould be a poop bucket for the back as it poops a lot! I was not looking forward to learning a new slicer, but it was very easy and plenty of online guides. I would say a great printer for beginners and advanced alike, the only thing I would say is a bigger build volume would be handy. One thing to consider too, is it needed a firmware update to connect to slicer and phone app. but easily done. No more moving SD cards from PC to printer, and a 3hr print in PETG on my last printer now takes 41 mins, and quality is far better.The only problems I have had so far are due to using an old (damp filament) so my own fault!If you are thinking about it, buy it while it's on offer! Great machine ( a little noisy ) but just put it somewhere away from telly, lol

I don't have many regrets on life but buying this printer is one. I've had it for nearly a year and still haven't managed to print any thing off other than the preset items on the screen which it came with. I have had 2 IT technicians to help get it set up and working .The first one manage to connect it to my internet and laptop by remotely logging into my computer .This took them one and a half hours .Then it still didn't print. I've paid for another IT person to come today and they have spent a further hour and a quarter trying to get the laptop or app talking to the printer to get it to print.One item started to print but came off the printing plate and fell apart after the IT guy had left. I am now going to have to ring up tomorrow to get more advise as there are all sorts of issues showing on the screen about the reason it can't print. You will get no help from the manufacturer as they are in china and will send you to their website.If you are not IT trained DO NOT BUY THIS PRINTER .The software and the ability to use it are hell. I wanted a printer for my 10 year old to be able to select a gadget and press print .Nothing could be further from this.This printer is not for a domestic home

I’ve been really happy with the Flashforge Adventurer 5X. It was much easier to get up and running than I expected, and after a bit of initial setup I was printing without having to constantly mess around with settings.Print quality has been really good so far and the whole thing feels well made. I also like how straightforward the software and controls are, especially compared with some of the other 3D printers I’ve used.One of the best things for me has been the ability to run custom firmware. It gives you a lot more flexibility and lets you get more out of the printer rather than being stuck with the stock setup.Overall, I’d definitely recommend it, especially if you want a printer that is easy to use but still gives you plenty of options to tinker with as you get more experienced.

3 Months update, Machine is still doing fantastically well, very rare fail print and mostly user error. Plenty of aftermarket accessories like built plate and nozzles. Pair it with a Sunlu S4 and it is almost as good as Bambu AMS. So Far a few hundred hours non stop printing and happy to buy another one to make long project faster.I have been using the Flashforge Adventurer 5X for a wide mix of practical workshop parts and decorative multi colour models and it has been a very enjoyable machine to own. Out of the box setup takes around 30 to 45 minutes and after that it is ready to print. The process is well guided and nothing feels confusing even if you are not coming from another Flashforge printer. Full auto levelling works reliably and saves a lot of time.For PLA and PETG there is no need for an enclosure at all. Prints stick well and come out clean and consistent. Flashforge provides a very detailed wiki with clear guides and explanations and that makes learning the printer much easier. From first power on to slicing and printing everything you need is documented clearly and it helps you gain confidence quickly. Files from Makerworld and other STL sharing websites work well and most designs slice without issues in the Flashforge Orca slicer.Some filament is included with the printer which is useful for testing and for the sample prints stored in the internal memory. It does not last long but it is enough to get familiar with the machine and confirm everything is working as expected. Multi colour printing is simple once all four filament ports are loaded. The system handles colour changes automatically. It is worth knowing that multi colour prints take a long time because each layer requires filament changes and this also creates a lot of waste material. That is simply how this system works. There are advanced modifications like Zmod but they require strong software and firmware knowledge and are not realistic for most users.I printed a taller enclosure myself using PETG and files found online. This was mainly to stop the tubes rubbing on the top lid and it worked perfectly. I also added the official camera (not included) which allows monitoring from a phone. The live view is quite laggy and the recorded timelapse quality is not great but it is usable and helpful for checking long prints.Print speed is very impressive and once dialled in it is comparable with the Bambu Lab P2S. Print quality is excellent with smooth walls and accurate dimensions. Hotend changes are straightforward but not tool free as two screws and a small plastic block must be removed. I have used inexpensive aftermarket hotends in sizes 0.25 0.6 and 0.8 and all have worked reliably. Overall this printer offers outstanding performance and flexibility and represents super good value for money for anyone wanting fast dependable multi colour printing at home.

I would give this 4.5 stars if possible.I am reasonably experienced at 3D printing but had recurring problems with my much modified Ender 5 so I wanted a reliable enclosed printer that I could just switch on and use mostly for making functional parts and this ticked many boxes. The new ranges of machines are billed as working straight out of the box and this does that excellently. Setup was very easy, but see connection issue below. The prints have consistently been the best I have ever produced and I can now use ABS and TPU confidently. I really like the easy swap nozzle, the camera, the internal fan, the speed, the reliable results and the price. Prints stick well to the plate even without the provided glue. For general printing this is an outstanding machine and I am delighted.For me, shortcomings are mainly software and docs and other people may not consider them important. The machine will work with most slicers (I used prusa) but there are only m/c profiles for their own Flashprint or Orca, a fork of Prusa, so I use Orca but it is a bit less refined imo. I have already suffered a nozzle clog and thankfully youtube came to my aid on how to clear it - the manual gives good basic info but does not explain detail. I needed to use the provided nozzle clearing prong but the video showed how to do so, loosening a screw on the side of the housing and forcing the prong down the extruder. I would not have known how to do this without that video but once I knew what to do it was quite straightforward.Connecting to wifi was flawless but I couldn't connect to it on my PC until I found out I needed to add port 8899 to the IP address so it is now connected but I still haven't been able to receive pictures from the camera. Again the manual is pretty sketchy about this. The spool holder is weak and has started to bend under the weight of a new spool of TPU so may not last long and I will experiment with using an external drier to hold the spool while printing.I definitely recommend the printer for newcomers to 3D printing or experienced users. the issues are not deal breakers and I expect that there will continue to be refinements to the software which will make it a pleasure to use in all aspects, especially if an octoprint type utility ever becomes an option.Edit: Thanks to Reddit I have the camera feed working - entered http://(printer IP):8080/?action=stream in my browser and live camera immediately available.

This is my first venture into 3D printing and thanks to the Flashforge Adventurer 3 i am well and truly hooked!My brother is massively into 3D printing and i have asked him to print me some items in the past, he suggested i looked at buying myself one, but to be honest, whilst i am very good at new tech, 3D printing looked way too complicated for even me!Whilst browsing the Amazon daily deals i came across this printer, reading the reviews and watching a few online videos everyone seemed to be saying this device required very little knowledge and just kind of worked straight out of the box - i decided to take the plunge and ordered!When the printer arrived i was immediately super impressed by the build quality of the device and the super smart appearance of the machine. I looked at the instructions included and to be honest they were beyond pointless! I therefore watched a setup video online and hooked up the device. To my amazement it really was just plug and play! I had to download the flashprint 5 software which is free from the manufacturers website - again there is no real instructions on how to use this software but online videos helped me through it and it actually was pretty simple!The printer comes with a small test roll of 250g PLA filament in red. Loading the filament was super easy, just place the roll inside the machine, feed the end into the printer and use the touch screen to pull the filament through. The touch screen guides you through the whole process.I was now ready for my first 3D print - Super Excited! I downloaded a couple of free .STL files and loaded them into Flashprint, clicked a couple of buttons and it send the file to the printer. The display on the printer sprung to life and informed me it was receiving the file, it then displayed a nice 3D image of the item i was printing - which was a Benchy (tug boat). The print took around 1hr 30 mins but WOW - how good did this little boat look!!! That's it i was hooked!! I ordered some more filament in black from Amazon and my next project was a skull that could hold pens/pencils. That has now been printing for around 8hrs and has around 3hrs left - so yes it's not a fast process - the machine takes it time, but the detail is just so amazing!What i love about the machine is that it is super quiet, it does not smell when printing, the print area is fully enclosed, touch screen is great, footprint is nice and compact, internal lights make checking on your print really easy, heat up time is astonishingly fast! Biggest plus is that it really is plug and play with no 3D printing knowledge needed!What i didn't like so much about the machine was, camera is pretty poor quality - you also can not view this in the slicing software but instead have to go to the printers IP address to view - it's good enough for you to check on your print but it's quite dark and lacking in detail, the quality looks like VGA rather than 720p. The printer can also only house 500g reels of filament, which are not value for money compared to larger 1kg rolls, however you can easily solve this buy purchasing a filament holder and having your PLA on the outside of the machine. The print bed is fairly small allowing a max of 150mmx150mmx150mm prints - but for a beginners machine i feel that size print is fine for an introduction into the world of 3D printing.In summary, if you are looking at getting into 3D printing then i very highly recommend you look at investing in the Flashforge Adventurer 3 machine - you honestly can not go wrong with this smart looking device! It is truly is ideal for a novice/beginner who has extremely limited knowledge of this daunting hobby. If you are a more experienced 3D printer then you may want to look elsewhere as this machine is pretty locked down in terms of firmware and customisation options.A truly amazing 3D Printer - i am totally in love with this device! I know for a fact i will be upgrading in the future and getting another machine that can perhaps print a little faster and have a larger print area. I will definitely consider getting another larger flashforge printer as i am super impressed with their product.I can not recommend this enough!!! Over the Moon with it!I hope that you found my review helpful

Out of the box and up and printing within 10 mins. Setup is quick and easy, just follow the instructions provided and you won't go wrong. I bought this to replace my K1 Speedy which has sadly broken after 18 months solid hammering. I wanted a machine to replace this (K1) and after research I decided to go for the Flashforge. As stated afer 10 mins we were up and running and the first print was ready for the printer. I used the Orca Flashforge software and it's easy to figure out. My first print was not an easy one by any standards - but WOW!!! I am over the moon with the result, so smooth and accurate it's better than anything my previous printer produced.Now I have been printing 3D for over 18 months but I really am delighted with the print quality of this device, another big bonus is that it really is a low noise machine (compared to K1) - the difference is very noticeable.The first print was so good that I can't see any need to 'tinker' with the slicer - if they all turn out like this then I am honestly delighted.A few other things worth noting - Tree supports (i use these a lot) they came off perfectly with no mess! nevver had this on the K1.Loading filament is so easy - I mean really easy.First Layer - early days but amazing!.Speed - More than happy with the 0.4mm nozzle fitted.Build quality - Great for the price point.Screen and display - all good and do the job.Now if your after a decent printer then I don't think you can go wrong with this device.In summary I am simply delighted - lets hope it serves me well.

the company changed the app to a new one that is not working for me : Flash Studio. nothing to help online about it. I use my laptop instead. The printer is "beginner" because it has a lot of things automatized but 3D printing is still really technical and you will need a lot of hours to learn and test before to be able to print anything. Regarding the filaments, i used Flashforge : good quality to began. Regarding the humidity, temperature, smell and health, I bought a cover to print inside.

Ich betreibe den Creator 5 nun seit gut 230 Stunden.Durch die vier einzelnen Druckköpfe eröffnet sich eine völlig neue Welt des Mehrfarbdrucks: Der Wechsel dauert nur 7 Sekunden, funktioniert sauber und es entsteht nahezu kein Filamentabfall.Mein Pro & Contra:Druckqualität (10/10):Bei PLA, PETG und eSUN ABS+ – sowohl im normalen als auch im Multifarben-Modus – ist die Qualität absolut überragend. In puncto Druckqualität steht er meinem H2S in nichts nach.Handhabung:An den Komfort und die Einsteigerfreundlichkeit eines Bambu Lab reicht er zwar nicht ganz heran, aber ich komme mit der Einfachheit des Druckers im Alltag sehr gut zurecht.Das manuelle Laden und Entladen des Filaments war anfangs etwas gewöhnungsbedürftig, funktioniert im Alltag jedoch tadellos.Bed-Leveling:Das automatische Bettnivellieren wird zuverlässig durchgeführt, allerdings leider nur vollflächig und nicht adaptiv. Dadurch nimmt das Leveling vor jedem Druck etwas zusätzliche Zeit in Anspruch.Software & Slicer:Der Flash Studio Slicer funktioniert unter Windows 11 einwandfrei. Unter Ubuntu hatte ich allerdings häufiger Probleme mit der Verbindung zum Drucker.Kamera & App:Die Kamera ist bestenfalls auf P1S-Niveau, reicht für die Überwachung über „Flash Studio“ und die Smartphone-App aber völlig aus.Die App selbst ist gut gemacht und funktioniert auch von unterwegs zuverlässig und problemlos.Zubehör:Der von Flashforge bereitgestellte Abfallbehälter zum Selberdrucken macht seinen Job ordentlich. Dadurch landen die Filamentfäden, die beispielsweise beim Laden oder Wechseln des Filaments entstehen, nicht mehr einfach auf dem Boden des Bauraums.Mein Fazit:Wer über kleinere Abstriche bei Software und Komfort hinwegsehen kann, bekommt hier einen extrem starken Mehrfarbdrucker, den ich voll und ganz empfehlen kann!

Bonne imprimante, à maîtriser comme les autres

Stampante entry level, ma di tutto rispetto. Come indicato anche dal produttore, la stampante è una stampante 3D home, adatta quindi a cicli di stampa home. Il mio piatto era già ben calibarto, il livellamento dell'asse z automatico può essere fatto ad ogni stampa. L'estrusione è ottima. Per adesso non ha fallito nemmeno una stampa. Il caricamento del filamento è molto buono. La bobina è posteriore alla stampante, ma personalmente meno invadente rispetto a un posizionamento superiore o laterale. La prima messa in servizio è stata facile, ma attenzione a chi non ha mai usato una stampante 3D, bisogna già sapere come funzionano le stampanti XYZ. Ho ingrassato l'asse Z a prescindere perchè la vite senza fine a mio avviso era troppo asciutta. Stampo il PLA a stampante chiusa e non ha mai avuto problemi. FlashPrint 5 come software di slicer è il più snello, se però vogliamo avere qualcosa di più il consiglio è di usare Flash Studio Desktop. La stampante ha il firmware chiuso e dedicato, ma per le persone che vogliono usarla senza troppi smanettamenti va benissimo. Ready to print appena fuori dalla scatola ma una cosa IMPORTANTISSIMA: il piatto, per agevolare il trasporto e non danneggiare l'asse, è bloccato da viti di bloccaggio, quindi leggere il manualetto prima di usarla. QUINDI: Seguire i passi indicati e tutto va liscio per l'unboxing e la messa in produzione. Bella anche da vedere. Silenziosa quando chiusa. Per chi viene dalle vecchie stampanti del 2021 questa è un salto qualitativo importante. Le dimensioni dell'oggetto finito sono pressoché fedeli alla modellazione, con una maggiorazione di uno 0.25 mm, ma è tutto nella norma per una stampante Home con un nozzle da 0.4 di default. In soldoni: bella stampante e molto funzionale. 5 stelle meritate per il rapporto qualità/prezzo.

Inget negativt om produkten, fungerar över förväntan