Wave Mic Arm Low Profile White, Microphone Boom Arm

I’ve been using the Elgato Wave Mic Arm LP (White) in my daughter’s gaming PC setup, and it is excellent in every way. The arm is sturdy, flexible, and easy to position, allowing the microphone to stay exactly where it’s needed without drooping or shifting during use. It integrates seamlessly with the Elgato Wave microphone, providing professional-level stability and adjustability for streaming, gaming, or recording. My daughter loves how easy it is to move and secure, making her setup both functional and visually clean. Overall, this mic arm is durable, reliable, and highly practical, and it complements any desktop or gaming setup beautifully.

This is my first low profile arm - i have so many options to keep the mic out of my way and to extend it without obstructing my view. Don’t think I did the cable management in the best way, it has two holes in the mic-connecting end depending how you want to face your mic and where the connection is. quality is 5 stars - it’s secure on my stand and well-padded to prevent damage. The cable management is next-level. Overall this is a functional, adaptable, aesthetically pleasing mount. I’m really impressed.

Wanted a high quality arm that would be white in color this fits my Yeti X and is perfect for keeping the mic out of the way when I don’t need it.

I put this in place and it is holding my Shure Mic. It works perfectly and has not become loose at all. I spent extra money, because I wanted something stable that has movement and that would hold my heavy Shure Mic and it SURE DOES!! It's White and it matches also, I move my mic around all the time and have no issues. It's a WINNER on my first try!

Right out of the box I knew this was quality. It's got the kind of build that I remember old diecast toys felt like. Extremely easy to set up and I almost cut half of a handle off because I wanted to get it really close to something until I realized that you can just pull on the handle, and it acts like a ratchet! That alone tells me that they thought about the user when they engineered this thing. It's worth every penny compared to the two that I've had to throw away now that were slightly less expensive but complete garbage. Very pleased with this.😀

The arm is assuredly of much better quality and range of motion than my last cheap boom arm. The cable management is also a very nice touch, but it would be better for my set up to have the cable management run under the boom arm instead of over. However it's range of motion has not been as quite as smooth as shown in the advertisements. I don't feel like I can just easily adjust it and move it into different positions because I have to keep it on the tighter side for the weight of my mic. However my mic is not that far off from other mic weights so... Also if you want a boom arm attachable pop filter forget it. These arms are to big for most pop filter clamps.

I've had this thing for two hour, but given its simple function (hold a microphone in position) and ease of setup (less than 10 minutes) I feel comfortable giving it a positive review. A couple of observations -- The product info says this arm has a "long reach" of 29.1 inches. This is true if you point the ball head bolt that connects to the microphone out horizontally. If you have to aim it vertically then the arm reaches 27 inches, base-to-ball-head. I would consider this the normal orientation for the bolt. This was initially a concern for me because I needed the full reach, but adding my mic's stand mount gave me a couple of more inches. Enough reach. I then switched this out for a suspension shockmount, and I can get the base of my mic 32 inches from the base. Ample reach. The shockmount and the mic (an Electro-Voice RE20) weigh a total of 2 pounds, 5 ounces. They create a lot of leverage. This is clearly pushing the Wave's joints to their limit, but they're holding up. The Wave comes with small parts - mounting adapters and a hex wrench. I was initially fussing about where to store these until I realized they would fit under the cable channel plates along with the cable. Also, if you pull down on the desk mount tightening arm, it swivels freely so you can point it out of the way after tightening the mount. Very cool. Edit: I have been using this regularly for a few months. It continues to be great.

I don't know if this was expensive or cheap for what it was, but the quality is unquestionable. Steel cable covers with magnets to hide the USB cable, a pretty nice desk clamp that is as large as a cheap monitor desk clamp. Everything is fairly stiff and ridge at the joints, but does wobble a tiny amount at the base. I don't have the set screw for the base engaged, which could be a reason for that. The second extension is high enough that I can move my mouse underneath it, but low enough that it slides under the monitor, with an ~8" space. Maybe there are equivalent low profile microphone booms in the 40-60 dollar range, but you can't go wrong here.

I purchased this Mic Arm for my YouTube studio. It’s paired with my Rode Mic and it’s FANTASTIC! It’s durable, built for everyday use! It’s beautiful and functions perfectly! Spend the extra money and get this one. Cheaper Mic Arms don’t last. Trust me when I say this- you’ll regret not buying this one! ☝️ It’s worth every penny.

È il quarto supporto per microfono che acquisto ed è senza dubbio il migliore in assoluto. Il prezzo è più alto rispetto alla media, ma la qualità costruttiva ripaga totalmente la spesa. La canalina magnetica in metallo per i cavi è geniale e comodissima: io la uso persino per agganciare direttamente la webcam magnetica! In questa colorazione bianca è incredibilmente elegante e pulito sulla scrivania. Consigliatissimo! 🤍👌

I had a high profile arm but wanted a low profile so it wouldn't be in front of my monitor as much. This one works beautifully, it floats just above my desk and stays out of my way while in use. The paint job is flawless and I love the magnetic covers on top of the arms for cable management which gives it a very clean look. The installation on the deks is easy since you can clamp it on and just click the arm in after is was fastened. I moved the arm around three times after being in the same place for a while and it left no trace on the desk at all (old ones I've used left black marks from the clamps or rubber). It came with the right attachment parts for me to be able to attach both my Yeti Blue microphone and my Røde N1 with shockmounts. The arm holds the pretty heavy microphones up well at many angles. Arrived on time and in great state, would recommend.

Gerçekten çok iyi

ÄLSKAR den här armen - den löste hela min setup! Nu kan jag dra runt min kamera över hela skrivbordet och ändra positionen! Älskart!