Digital Multimeter,Multimeter Tester, High Sensitivity Voltmeter Ammeter Ohmmeter NCV Circuit Checker Measures AC/DC Voltage,AC/DC Current, Resistance, Diodes, Continuity, Transistor (Orange)

This is a great little piece of equipment to have in your toolbox! It seems to be sufficiently accurate for most purposes, as far as I can tell, and it has the versatility to measure voltages, current, resistance and continuity in both DC and AC circuits. One of the specifications that attracted me to this particular make and model was that it automatically sets the range of values according to the checks you are making, whereas some other meters require you to set the range manually. I am not an electrician or an electronics expert, but the instruction manual is very explanatory and there are plenty of videos online to guide you through the various measurements that can be taken. Unless you are an expert, I would certainly recommend viewing these to prevent any damage to the meter or injury to yourself. The kit contains two sets of leads - one set with crocodile clips and one with spikes. I have found the leads to be more than sufficient length to enable me to carry out simple checks like continuity in cables and voltage in batteries. The meter is capable of conducting voltage checks on car and leisure batteries as well. So, all in all, I would recommend this as a very useful piece of kit to have in your toolbox!

It does what it should do, Whant do Amozon expect it to do - dly eggs ?

I purchased this because i was having issues with my car battery and i wanted to diagnose the problem before having too shell out big money on a new battery.It is very simple to use and has batteries supplied which are fitted securely in the rear. It operated well and give me good clear readings. A good purchase at the right price which will prove to be a worthy investment at a budget price. I carry case would have been perfect but i could use any pouch or bag to make do. There are so many modes and options which are yet to be fully explored but I am pleased with my purchase

Nice clear display used it several times already nice well made tester

The actual design and build of this multimeter is very good and it comes with point probes and also a set of crocodile clip leads.The physical design of the case has a kick stand to prop it up and also 2 probe holders/slots such that the probes can be placed in them for either storage or to keep the probe still will you bring something to touch the end of the probe.I tested some batteries, our mains voltage and some fuses for continuity testing and all values were as expected.There were three points I found to be an issue though:🔊 The buzzer for continuity testing is so quiet it's hardly worth having it there in the first place... this is a big problem for me, as when checking continuity amongst a whole load of wires, I want to concentrate of where I am looking (at the wires) and listen for the buzzer to let me know when I find the wire I am tracing... I do not want to be looking at the display each time a change wires to trace.📟 The display... although not the worst display, this display still suffers for the problem that it can only be seen clearly if looked at directly or from below (tilted away from you). If you look at the display from even a small angle above the unit, then the reading goes faint and is very difficult to read. Again, I do not want to be bobbing my head around trying to see the display when I have my hands full trying to get a reading.The display issue is common at this price range and so I sort of expect it now, just hoping that one day these displays improve for the cheaper products.💡 The Backlight - the backlight only stays on for about 12 seconds !!!If I turn the backlight on, I want/need it to stay on until I turn it off ... or maybe after 5 minutes of inactivity. I don't want the backlight on for just a few seconds - this is especially obviously important when working in dark places!Overall, at £21.99 (at the time of review), I feel that would be ok IF the buzzer worked and made a sound you could hear - this is a major part of functionality I must have, so without that working properly, I feel this is over priced for the functionality it provides.

Works well good car battery tester

I need to train the misses to use it last weekend she measured a battery at precisely 3.900Volts.......:-)

My previous multimeter of 10+ years died the other day; needed a replacement.Ordered this, it arrived the day after and works as it should. Easy to set up & uses x2 AAA batteries which are suppliedA+

Seems to be better than the ones I've gotten in stores. Good feel in the hand. Probes slide in/out from the bottom of the holders. The little stand is a nice touch if you're on a table. This is the first one I've had that has a Hold button; it works but is hard to reach while holding the probes (included alligator clip cables should help when they will fit). The reading seems accurate compared with my other meter. Part of the reason I chose it is that it uses AAA batteries, for which I keep spare rechargeables, rather than 9V. No complaints so far (I mostly use these for 12V and AA/AAA battery charge testing) . Can't attest to durability yet because I just got it.Update: I ordered a 2nd one because I like these better than others and because I kind of messed up the first ONE. I left it out in the rain and then dried it in the sun where it got too hot. It still works but is a kittke harder to get a good reading. But that's my fault; I'll be more careful with the new one.

Lo uso desde hace más de un año y siempre ha funcionado correctamente. Para un uso privado no profesional vale realmente la pena.

Bon appareil et bonne livraison

Gefällt mir gut, tut was es soll.

All functions works as expected and it's a good multimeter if you are working witch electricity and electronics. Big plus for including batteries and both point and alligator clips probes.Highly recommend!