Freud 6" Pro Dado Set with Tico Hi-Density Carbide for Flat Bottom Grooves - Includes 2 Blades, 3 Chippers, Spacers, Shim Set & Carrying Case, Negative Hook Angle - SD206

I’ve been using this dado set for about 6 months now, and I’ve gotta say the quality is amazing. The cuts come out super clean and precise, with very little tear-out, even on tougher materials. You can really tell the carbide is high quality—it stays sharp and performs consistently. One of the best parts is how versatile it is. With all the included chippers and shims, you’ve got a ton of options to dial in the exact width you need, which makes a big difference for accurate joinery. Setup is straightforward, and once it’s dialed in, it runs smooth and balanced without vibration. Overall, top-tier performance and build quality. If you want clean, professional results, this set delivers.

A great dado set. Easy instructions. Carbide tips are very sharp. Smooth cuts in old dry plywood where other blades tend to splinter. Shim washers allow precise and quick thickness adjustment as other reviews state. Storage case holder is nice bonus. Would purchase again

I am a hobbyist, but did get a scholarship in woodworking. A router is probably the most versatile tool in any shop, especially if you have a table and mine is no different getting considerable use. My, my dado's, rabbets, etc. were always done on my router table. While I said it is the most versatile, it also means you need to be on your game in terms of router usage and depending on what you want to do, this sometimes means you enter the dangerous climb cut territory as to decrease tear out. I just finished building bathroom cabinets and now, I am building some barn doors. Since I am dealing with 8/4 knotty alder, and I will be renovating my kitchen cabinets as well so I started investigating again. My deal is that I buy the best because I want them to last. My tools, bits and blades reflect that as well, but I did not want to spend $300, hence why I did not have a dado set. Well, I found this, being Freud, I decided to give it a shot and return it if I did not like what I saw. Well, it is impressive. 6" scared me, but thinking through the years, I never needed a dado or groove deeper than an inch, and these blades give more to me, so... In theory, 6" also gives you a little more power, but I have a nice Jet Cabinet saw, so no worries there. Using the set is a pleasure, cutting like butter, no vibration or noise with a very sharp cut. It gives a perfectly flat cut, so that hits my number one requirement for quality in cut. It comes with many spacers as well, even with the thickness stamped, so very helpful. The case is also important as well as it protects your investment and ensures you don't lose parts. If there is a complaint, I would prefer it if it was keyed so you cannot put carbide against carbide. As long as you pay attention when tightening the arbor you will be fine; it only takes a couple seconds to confirm all is well before you tighten. Like another reviewer, the template is inaccurate. The reality though is that we all tend to use just a couple different patterns, so grab the calipers, figure it out, and never worry about it. solid, vs, ply, vs. mdf, vs. melamine are all different, so just create a template for each. There is really no way around this and if you woodwork to any capacity, you do this with everything. Setting tooling up to be square and accurate is the most important step anyway, and if you skip it, you will constantly fight it and your project will show it. So, it's something you should have accepted long ago and if there are two tips I give to everyone who asks me how I do it, I say patience and tool setup. You don't need to have the best tools, but they do have to be setup perfectly. That was free, LOL.

I bought this for my Powermatic PM2000B table saw. Pros: - Fits my Powermatic PM2000B table saw. 5/8" Arbor - Comes with Shims - Comes with a table that helps with setup on width of your cuts - Great cut quality (no tear outs) super smooth Cons: - Arbor size is almost exactly the same size so getting the blades on and off is a hastle. - No instructions for blade setup - Little pricey Great product overall. Was happy it worked for my Powermatic Table Saw. First time using Dado's so it'll be nice to up my projects and have better joinery.

I'm a novice home woodworker and needed a dado set. This can be a big investment so I made sure to read a lot of reviews before making my decision. Even though this dado set is more expensive than a lot of other sets I decided to go with this Freud 8inch Stacked set due to reputation, quality and reviews. I almost went with another brand that was about half as much in price but I kept coming across people saying that they wished they had spent the extra cash to get a better quality dado set due to issues they were having. With that said I got this one and after using it for 2 projects I'm very happy with my purchase. Simply put this dado set is definitely a high quality product that can be seen the first time you handle it. I was first overwhelmed on how to install this since I've never used one but after watching a few videos the overwhelmness quickly left. I'm not going to say the instructions are perfect because they are not. The first time I used this I was using the 2 blades and 2 chippers and didn't realize I put on one of the chippers the wrong way, with the teeth facing the wrong way. I actually cut about 6 boards with it this way til I realized what I had done. I take a lot of responsibility in this mistake but I think the instructions could have been more detailed in emphasizing the importance of blade placement of the chippers, especially when you're a rookie and have never used one. The dado set was not damaged at all, in fact the cuts I made didn't even show any ill effect. Now I know! I still give this set 5 stars and money well spent. Once you use a dado set you'll never go back to trying to use your regular saw blade to cut dados and such.

If you are planning on making plywood carcasses for cabinetry, do yourself a favor and buy this today - like right now. Do not be like me and buy your first dado stack after making ten thousand cabinet carcasses. This 6" stack is PERFECT for Dewalt's DWE7491 - that's what I used this on and was beyond impressed. The saw had ZERO issues cutting a 5/16" deep dado - I believe that's what I did - in one pass. So here's the kicker: Look at my photo, this is cheap $45 a sheet imported plywood with a terrible thin veneer - not $95 a sheet ply from the big box aisles. This cut almost smooth as a baby's bum - granted it's brand new and that image shows the 3rd cut I made with this blade. So let's talk arbor: Mine was nearly tapped out with two blades, three chippers, and just one shim. This set up got me just a tad undersized for 3/4" ply, so I maybe needed one more spacer or a combination of the much thinner shims. So I think the Dewalt DWE7491 arbor has just enough real estate to hold what you need to cut 3/4" ply but NO MORE. And that's okay. Two dado passes to achieve that odd wider than 3/4" dado is much faster than 6 single blade passes - I might know that. So overall, if you own a smaller contractor sized saw, I HIGHLY recommend this blade. I also bought the throat plate made by FBULWSEC, sold on Amazon, and I am really happy with that as well.

Works with my Skil table saw. I had to sell the others I had because they were too wide for my table saw.

I spent a lot of time researching Dado blades before purchasing this one. I'm not afraid to spend money on a saw blade because a good blade makes a huge difference. I have a few Forrest blades as well as a Tenryu, some Freud blades, etc.. After doing a lot of research, I settled on this one simply because of performance for the price. I've only used it about 3 times so far and it's been great. Very sharp, clean cuts, and easy to get the right size cut. I'm glad I didn't spend $200-$300 more a Forrest, Ridge or Tenryu. I'm sure those may be better, but for 99% of the cuts I'll be doing, this one works great.

WE restored a older Makita overhead draw saw, to be a dedicated Dado cutter, new bench with tee channels and hold down clamps.

Excelente opción para corte repetitivos o ranuras perfctas

Impeccable je suis content 👍👍👍

muito bom

Ironic that the only way to buy this Italian-made dado in UK is to import from US! Initial impressions are favourable; tried on my radial arm saw without chippers or spacers in the first instance whilst waiting for clarification of the scanty instructions (not helped by the tiny print). The excellent case would be improved by labelling to show what goes where. I notice that the spacers are now labelled with their sizes. Four stars whilst awaiting response from Freud (didn't know the name is from FREsas of UDine) would probably change to five.