4 Panel Room Divider with Flat Pad

A great buy on Amazon! This fabric screen is both beautiful and functional. It has a metal frame that is sturdy, stable, and effortless to move. It’s perfect for blocking off a private area in my living room. I really like the black color; it’s cool and offers excellent privacy. It stands 6 feet high, has an adjustable width, and doesn't take up space. Amazon's delivery is always reliable. Thanks a lot!

you will need a feral rapid monkey to assemble it, but once assembled it's very nice and effective. clean design, takes minimal space. sturdy. assembly can be done in 2-3 minutes or over 3 days with a 2.5 hour initial investment. once assembled you should be happy. well packaged, arrived fast. very happy w purchase. exactly as advertised.

I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.

I got these dividers for outdoor use for some privacy from neighbors. They arrived quickly and were easy to set up. They look good, and though the legs don’t offer stability against any amount of wind—which I expected as it wasn’t advertised for outdoor use—all it took was placing a cinder block on the feet to hold it up right. Coverage is good, it’s easy to fold and move as needed, and it’s light weight. All in all a decent product. I will caution the purchase of “used like-new,” as both of the dividers I ordered were previously returned items, and one came missing a cap, instructions were not included, and the poles were all mixed up and not properly labeled. If I had not ordered a second divider (which did include the instructions) I would have had a much harder time figuring out which pieces were which and how to put them together.

Based on a skim of the store listing, I didn't realize that this product was interlocking poles with fabric stretched over the gaps that required assembly. Normally this wouldn't be a problem, but the fabric seems to be too short to assemble without straining the components. I managed to assemble one of the panels with the help of my brother and it required pushing the connecting horizontal rod downward against the fabric with a lot of force and it still required screwing in the screw at an odd angle that didn't feel natural. Once I had the panel, I was so discouraged that I just decided to give up and hope I could find something better. Knowing what I know now, this just isn't practical and I think it's worth spending more to find something that doesn't require so much headache to assemble despite following the instructions exactly as written. I don't know why people are saying that this is easy to assemble, it really isn't. I wasted over an hour before realizing that this thing is basically impossible to assemble on your own.

Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.

Love it and just in time to hang my Halloween decorations from it!! Will order another next pay day!!! Didnt take too long to figure out, just don't forget the little rubber things before screwing stuff together! Good luck!!

Great product once constructed. Construction definitely takes a minimum of 2 people since you have to stretcheach panel 2 inches longer then they are. Once done, very taut and works great

Me encanta mi biombo. El material lo súper recomiendo. Duradero, el colo ni se diga. Vale la pena la compra! ☺️

Surprised by the product Easy to put together (However you need quite a bit of free space) No problems during assembly and it does exactly what I hoped it would: reduce accoustics in the room I stream (open space) by serving as a back wall to my workspace.

Took time and effort to assemble. The base quality isn’t great

Not the easiest to assemble, but that is because the fabric is tight. So it takes a bit more torque to tighten it up. I am sharing a video so you can see the way that I figured out to assemble them. By the 7th and 8th panel I was down to about 5 minutes a piece. And they are tight as little drums. I can understand why some people say it takes two people, or others say it's impossible to install. It just takes a little ingenuity, physics, to install.

Todo bien