UGEARS Tyrannnosaurus Rex

- Made in Ukraine- Does not come with glue- Does come with a bit of sandpaper and a wax stickThis is the first 3D I've done from this brand. It's decent quality wood, very little knotting and, most happily, no scorch or burn marks.Cuts are clean. There is a "helper" tool that helps you get the smaller parts off the board.This one is pretty complicated. I'd put it at "hard" difficulty level. The spring that comes with is quite sturdy and should last a good long while.

Well built pieces, thicker wood, but very difficult to assemble due to the extremely tight fit between posts and holes. You must wax every post and it is still difficult to fit together, requiring extreme pressure, but don’t break it! The assembly instructions are very bad. When you get to the last 2 assemblies of the thighs and legs you will not understand the awful pictures. You cannot determine what attaches to what. The fits are so tight that when completed it would not move under its spring power. Also, this took me 40 hours and this is my hobby for 50 years!!

The model was one of the most complex I have ever assembled compounded by poor and confusing descriptive illustrations. I had to take apart and reassemble parts several times because the instructions were not clear and without sufficient detail.The model when assembled is very impressive but any small mistake can cause it to be inoperable.Avoid the frustration .

much smaller than expected.

This is the 2nd wooden model I've ever put together. It was way harder to put together than I thought it would be. There were several points where I thought I was breaking the model just trying to get the pieces together.The quality of the wood is higher than I anticipated. The wood is thick and doesn't have many knots, but I did have several pieces splinter as I was putting them together. I struggled a lot to get pieces to go together because they are very tight fitting even with waxing and sanding pieces to make it easier to slide them together.Unfortunately, I got to page 14 of the instructions where it tells you to test that all of the gears move properly and I struggled getting anything to move. I'm guessing that something is put together incorrectly, but I don't have the heart to try and pull everything apart to check. One day I might finish this dinosaur, but today is not that day.

Buenas terminaciones y calidad de material