Miimall [6 Pack] Compatible with OMEGA × Swatch Bioceramic MoonSwatch Screen Protector, Flexible TPU Film [Self-Healing] [HD Clear] [Anti-Scratch] Screen Film for Bioceramic MoonSwatch

I’m not sure what I did, but the film went on the moonswatch perfectly, third time, but it was a little fiddly to detach from the packaging film. It looks invisible, and here’s hoping it works. One micro bubble, but frankly, I couldn’t be bothered, far too small to let it worry me. The dial of the watch is so busy, bubbles can’t possibly detract.

Great item, does exactly what you need it to. Be aware, as other reviewers have said, getting the white backing paper off is near on impossible. I ended up using a needle to separate. However once separate, these went on perfectly and no air bubbles.. cannot even see where they have been applied. Wonderful! These will hopefully provide the protection needed for watches that are renowned for scratching easily. Dropped 1 star for the tough removal of the backing paper but if you can persevere with that, its a great product. Bonus is that you get 6 in a pack!

There are no instructions on these, and there are seven distinct steps to complete where order matters a lot. Another customer mentioned that steps were ordered but that isn't true for anything other than the stickers on the protector—the polishing, the cleaning with alcohol, the dust removal, the alignment sticker placement and the bubble removal are all up to you to figure out. The stickers were impossible to separate without a razor blade—the white side must separated from the clear protector before the yellow side is removed. The sticky tabs do nothing to help that. Placement of the protector with the yellow sticker in place lead to bubbles being very visible on all of the protectors I managed to fit. The bubble removal tool does nothing to help these. One protector was lost to fingerprints because the yellow separated before the white and another just wouldn't separate at all. I've done a lot of fine soldering and other small scale tasks before, but with these you're set up to fail despite any expertise. I would not recommend.

Really happy with these protectors, too bad I'd already got a scratch on my new MoonSwatch before I'd remembered to order them 🥲 thankfully though I was able to polish the crystal up nice and clear and have now applied a protector! 😃 The package is good, you get six protectors, six wet cleaning wipes, six dry cleaning wipes and a card bubble smoothing tool with some fabric on the end to slide over when smoothing the protector onto the watch face. The first application went well but there were two obvious small bubbles that I personally couldn't live with, so I gave it another go, the second time however was a flawless application 😊 I smoothed out the protector in quarters from the center out toward the edges and I think that's what helped me avoid any bubbles! I can't even see the protectors on there with my eye unless I shine my phone torch onto it which proves these protectors have amazing clarity and they fit great covering 90% of the watch face for peace of mind 👍🏻 The price is fair for six protectors and the package as a whole! I don't think this protector will come free any time soon so it's very secure! Really happy with this product!

I bought this 6-pack for my OMEGA x Swatch MoonSwatch because the original bioceramic acrylic crystal scratches if you even look at it wrong. The protector itself does a decent job—it’s a flexible TPU film that handles minor scuffs well, fits the dome shape perfectly, and stays practically invisible once it settles. However, the installation process is incredibly frustrating. The alignment tabs and instructions are confusing, and because the film is so thin, it easily traps tiny dust particles and air bubbles underneath. I ended up ruining the first two protectors completely before finally getting the third one to lay down right. Even then, the edges took about a day to fully stick down to the curved crystal. It's a good thing it comes in a 6-pack, because you will definitely need the spares to practice with. If you have a lot of patience, it’s worth the price to protect an expensive watch, but don't expect a flawless application on your first try."

This worked really well. It was easy to apply and very unobtrusive once in place. My MoonSwatch crystal was starting to show scratches and I polished it with Polywatch before adding this protector. I also applied one to my similarly sized Christopher Ward chronometer, with equal success. As they both went on perfectly first time, no bubbles, I have four left for future use.

Having scratched my lens of my Swatch, I polished it out and then fitted one of these screen protectors. Once you get tyebyang of peeling the right bit off, they are easy to apply and don't create bubbles like phone protectors can do. You can't see it fitted either. I'm happy. Fitted tonall my Swatch now.

These don't come with instructions and are quite tricky to install, but they do the job well and you can barely notice them when they're on. Use one just to figure out how they work and do the following: 1) Wipe the screen with a cloth and stick the dust absorber to it, then peel it off to make sure the crystal is dust free. 2) Pick up a protector and peel the white backing off, leaving the yellow attached. This is difficult because the yellow side is far easier to peel off and the white side requires a lot of patience in order to separate it from the sticky side of the protector. I managed to separate them with my nail but others have used a scalpel. 3) Once the sticky side of the protector is uncovered, you're ready to sick it to the moonswatch crystal. Use the tab on the yellow side to line it up and gently lay it down. 4) Use the card to smooth out any bubbles and apply the protector. It's impossible to do it with zero bubbles. My second attempt was my most successful and I still had a couple of tiny bubbles. One of them has completely disappeared and the other is much smaller after 12 hours so they do disappear on their own. 5) Smooth it over with the polishing cloth after applying to make sure its firmly stuck to the moonswatch crystal and you're all set. Hope these instructions help someone else as it took me a while and two attempts for me to get it right. Peeling them off doesn't damage the crystal like some others do. After doing some research, it looks like these are exactly the same as the more expensive ones and I wouldn't be surprised if they're all made in the same factory. I'd buy them again now I'm confident fitting them. Only issue with them is the lack of instructions.

🔷 Protezione anti-graffio: La pellicola offre una protezione eccellente contro graffi e danni, mantenendo l'orologio come nuovo, anche con un uso quotidiano. 🔷 Autoguarigione: La funzione autoguarigione aiuta a ridurre i segni di graffi minori, garantendo che la protezione rimanga sempre visibile e intatta. 🔷 Trasparenza elevata: La pellicola HD Clear offre una visibilità perfetta, mantenendo il design originale dell'orologio senza compromettere la chiarezza. 🔷 Facile applicazione: La pellicola si applica facilmente e senza bolle, garantendo una copertura sicura e uniforme su tutta la superficie. ⌚✨ Un'ottima soluzione per proteggere il tuo orologio, preservando al contempo il suo aspetto e la sua funzionalità!

Fits quite well and very slim. Manages to fit nicely around the "curved" dome too though doesn't protect the sides (though I'm not sure what kind of screen protector could do that!) For those saying the protector is too thick, or is not sticky enough - it's because the "step 1 back film" is very hard to remove (I ruined 2 protectors trying to remove it - and had to resort to a razor blade in the end) but once removed, application was relatively straight forward. Not sure how long it'll last, but there's quite a few in the box so will replace them when the time comes.

Die Folie schützt gut und hat schon viel Schaden am Kunststoffglas verhindert. Wenn die Folie beschädigt ist, kann man einfach die nächste Folie auftragen, da diese sich ohne Rückstand anziehen lassen. Die Größe passt so gut, dass man die Folie nicht wahrnimmt und genau hinschauen muss. Die Montage ist einfach. Man muss nur schauen, dass das Glas wirklich sauber und staubfrei ist. Dafür werden Helfer mitgeliefert. Die Folie 'saugt' sich bei der Montage schon selbst ans Glas. Die Seiten Beschreibung an den Aufklebern beachten, damit man nicht die falsche Seite auf das Glas anbringt. Danach eventuelle Blase aus der Folie massieren und fertig. Ich habe die Folie auf mehreren Uhren angebracht und habe sie bisher nur gewechselt, wenn ich einen tiefen Kratzer in der Folie hatte. Hält damit auch sehr gut aud dem Glas. Guter Schutz und am Besten auf eine neue Uhr auftragen, damit unter der Folie keine Kratzer sind.

No instructions in the product, and none of the backs came off which resulted in me having to pry it off with my nail and that resulted in fingerprints on the screenprotector. DO NOT BUY.

Usamos estos protectores-pegatinas para reloj Saturn de Swatch edición omega. Vienen perfectos y no se nota nada que tienen la pegatina