Solsop100PCS RJ45 Pass Through Connectors + 100PCS RJ45 Boot Cover, UTP Cat6 Connectors for 24-26AWG Solid Wire and Standard Cable

Unlike some other reviews I had no problems with these plugs at all.I ran a test on the cable connections after terminating and all results were 100%.No drop in signal on none of the pairs.All core lengths were the same when you run it through the Network cable tester.I would 100% recommend these plugs.I must admit i did use it on external UTP cable so maybe that made a difference to the results as the cable is solid core rather that stranded cable.

Connectors look fine but the drum container was smashed by other items in the delivery and the connectors had spilled out into box. Needs a cellophane or plastic bag containment.

Done what it was supposed to do. Making cat 6 cables.

Easy to brake once fitted ok

Very disappointed with these, had issues with pin 1 & 8 not belling out on test, thought the cat 5 cable I was using was damaged. Used another roll of cable and same thing happened.

Just perfect for my job handy container

easy to use comes in a nice screw lid tub

Much easier to terminate than the standard non pass through plugs, would recommend.

All around decent ends. However, my favourite feature is how well designed the guide channels for the individual wires are. Anyone that does this for a living knows how frustrating and time wasting it can be fighting with getting the wires in all the way. Not with these. Once you've got them arranged and lined up, they slip right on through and out the other side. No snags, no doubling up in one hole. Nice, and very time saving.The snagless sleeves are mediocre, but still good enough.Recommended.NOTE: requires a pass through crimper. If you don't have one, get one and never go back!

Easy to use

work well

I waited until i finished the 100 connectors to make this review.and out of 100 only 1 had a problem ( shortcut pins 7-8).I used the VDV226-005 KLEIN TOOLS passthrough crimper. and works perfect with this connector cutting all the wires after the crimp ( with other connectors some times the pin 1 or 8 had to be cut it manually ).using this kind of connectors you can crimp in a fraction of the time that you spend with regular connectors. and free of miswiring or bad connections.for the price no way to beat this connector.but remember you need a passthrough crimp tool

Habe 3 Patchkabel damit gemacht, hat fehlerfrei funktioniert. Leider ist keine Zugentlastung vorhanden und auch kein Einführhilfe/Schablone. Letzteres ist verschmerzbar, wenn die Kabel passen. Wie beschrieben AWG24, d.h. Einzelader mit Isolierung ca. 0,9mm und Kupferkern ca. 0,5mm. Würde es nur für solche Kabel empfehlen, dicker wird nicht passen!