PICTRONLS10 Camera Desk Mount Table Stand with 1/4" Ball Head, 16"-33.8" Adjustable Light Stand, Tabletop C Clamp Arm for DSLR Camera, Ring Light, Live Streaming, Photo Video Shooting

The VIJIM LS11 is virtually identical to the SmallRIg DT-30 in terms of material, construction, design, dimensions , stability, etc. Both are made in China, most likely by the same manufacturer. The SmallRig DT-30 comes with a small, nylon carrying case that is too small and near useless. The LS11 doesn't come witht the case. Both have identical desktop clamps and both have three identical vertical tube sections that can be adjusted for same height. Both have a 1/4" screw mount ball joint on the top section for your camera or projector. Both come with an extra horizontal arm about a foot long that can be clamped onto the lower tube section or the middle tube section (but not the top 3rd vertical section). This limits the height of the horizontal arm adjustment from 0-24 inches off the desktop. But here is the key difference - the LS11 horizontal arm comes with two separable sections whereas the DT-30 horizontal arm is a fixed length design. One can screw the extra horizontal extension arm on the LS11 screws into the ball joint on the end of the first horizontal section to give extra horizontal extension. Moreover, the extra arm extension can also be screwed into the ball joint at the top of the third vertical section. This gives the LS11 about an extra 11" in total vertical height over the DT-30 (45" versus 34"); or alternately, it allows you to have a second horizontal arm. In short, the LS11 does exactly everything the DT-30 does but also offers almost a foot more adjustment in height or horizontal reach. Using just the first section of the LS11 or DT-30 horizontal arm is very stable and easily supported my 1.5 lb projector. Adding on the second 10" horizontal section onto the LS11 was still ultimately stable with the projector but it had a little initial wobble. Max rating is 2.2 lbs on either the LS11 or DT-30 horizontal arm. I believe that you can safely load 2.2 lbs on either DT30 or LS11 if you are only using the single horizontal section. With two horizontal sections, hanging 2.2 lbs on the LS11 seems doable but a little dicey. There is one small final difference between the two designs. The LS11 first extension tube screws into the desk clamp whereas the the first extension tube on the DT-30 is welded to the clamp. I found no difference in performance or stability. In short, the LS11 is virtually identical to the DT-30 in dimensions, material, paint, and quality. The LS11 and Dt30 perform identically with a single horizontal arm. However, the extra horizontal extension arm that comes with the LS11 gives it added height options and horizontal extension options.

I tried out a few different camera mounts and this one and the attachment which comes with it was very helpful.

The media could not be loaded. Works as intended. The clamp for the small appendage arm snapped, i definitely over tightened.For the cost it was worth ordering a second one.I use other amazon mounts on it. All the ball heads it has are awesome.Easy to install, easily adjustable, versatile product. Not even upset the first one broke honestly, my fault just be careful as it doesn’t need to be lug nut tight to stay put.

Good quality but a pricy , I’ve had a cheaper version of this and it’s about the same quality. In saying this it does what it’s meant to , so no complaints there

Truly wonderful product, the best mount I have purchased.

It is sturdier than I had anticipated. Definitely meets my needs.

I am not sure why companies produce products that do not work. It doesn't hold my camera and even struggles to hold my iPhone 11 Pro Max. So, I was not very impressed with the cheap feel, but gave it a chance, and tried it different ways, but still, it couldn't hold the weight properly. this will only be good to hold a small light. camera and phone you need to find your own extra support. the 360 is a great idea, but they need to improve the product to be more sturdy. As you can see on the phone my camera is only 1.6 pounds - nope it didn't work.

This stand is made of primarily aluminum and is not plastic like most other stands. The assembly is super easy; all that needs to happen is twisting the base into the bottom of the stand. The product comes in two pieces, the base that attaches to the table and the rest of the stand.The main reason I was drawn to this stand is that the head where your item attaches to the stand is completely rotatable. This makes it a perfect stand for lighting if you have a small business and need to take photos, for stream lighting, for holding a camera while you work on a flat table, and possibly many other applications.Yes, there are other cheaper stands on Amazon but most all of them do not have a rotatable attachment point. Other stands are just the screw point on top of a pole leaving your attached accessory facing forward at whatever height you purchase, which in my opinion, is not very useful.Build quality is better than expected at the $30 price point and nothing is loose when attaching your accessory or to the table.I do wish this was slightly cheaper as I needed 2 for my setup, but I know I will get the value back over time from using this stand. 2 of these stand is still cheaper than buying 1 elgato stand at their normal retail price.

Suporte não fica balançado, eh de um material resistente. Valeu mto a pena

Very nice design and feels sturdy. The control joints are easy to adjust and the included pieces allow many versatile use cases.I have LED lights on the fixed post and a webcam on the extension arm which can move around.

I recently purchased the VIJIM LS10 desktop light stand, and I must say, I'm quite impressed with its quality and design. The stand is constructed with high-quality aluminum. The finish on the stand is very nice. One thing that stands out about the VIJIM LS10 is its well-designed mounting system. The stand features three sections of extending poles, allowing for height adjustment from 16 inches to 33 inches. This versatility is perfect for various overhead shootings and lighting setups.I particularly appreciate the rubber ring wingnut, which makes it easy to fix the pole securely in place. The detachable c-clamp, which is expandable and provides maximum stability when attached to most desks in the market. The 360° ball head on the VIJIM LS10 is a great feature that allows for easy adjustment and positioning of your rig, webcam, cameras, lights, and other accessories.The stand feels robust and durable. The surface is also sprayed and anodized, adding to its overall textured and premium feel. Even the packaging and instructions reflect the attention to detail and care taken by the manufacturer which I believe is a sub-brand of Ulanzi which is a huge and well known photographer brand out of asia. The box and packaging are well done, and the instructions are clear and helpful, making the setup process a breeze.Overall, I highly recommend the VIJIM LS10 desktop mout. It's a high-quality product that offers durability, versatility, and stability. Whether you're a photographer, content creator, or just need a reliable stand for your lighting setup, the LS10 is definitely worth considering.

Samen met "VIJIM LS04 statiefarm voor camera/microfoon/videolamp" wordt deze mount gebruikt om m.b.v. een, lichte, beamer, naaipatronen te projecteren op een tafel. Een mooie, betaalbare oplossing.

Height is enough to keep light over a 27 inch monitor and it will hold an Elgato Key light okay if you don’t need to move a lot. It’s a lighter and more compact for factor compared to the Elgato and Neewer, which is good if space is a problem, but not great if your goal is quality.