Replacement Ceramic Tap Cartridge Insert 1/4 Turn BSP 1/2" 20 Teeth 53mm

Ceramic tap cartridges are a bit of a minefield, with umpteen measurements to check, the number of splines on the shaft, direction of rotation to open/close the tap... etc. These cartridges fit my kitchen tap perfectly, and all the information was provided on the product page. Fitted, they work well, with smooth movement and good control of the water flow. A little dab of silicone grease on the 1/2" BSP thread and rubber olive helps, but they can also just be swapped in for a failed or failing tap cartridge. Just check your measurements before ordering!

Very happy to find these. Despite the spline being slightly longer, the overall size matches cartridges for the Blanco Arti BM4552CH. Although limited, there are alternatives, but they are ridiculously expensive at ~£30 a pair including postage (given the whole tap is generally a little over £100). I must admit, these do not appear to be as robust as the originals. The silicon (red/blue) gaskets don't look like they will last. Hopefully they will be replaceable. I have also had to order an aerator for £12. Absolute madness, the plumbing industry should be forced to comply to standard sizes, simply on the basis of sustainability.

Leaking Tap? Don't replace the tap just replace the cartridges. These are ceramic quarter turn and will fir most standard kitchen taps including monobloc mixer taps. The quality was acceptable, it fixed the leak and are still working some years later.

all fine ad a little o ring as a spacer for tap handle to take up small bit of play but all good looks well made time will tell like extra parts to replace in future fingers x would recomend and buy again thank you

easy to fit

Started dripping again after 2 years.

After trying all the usual big DIY shops in my city for a cartridge that fits my taps (and failing completely), I thought I’d try these. They fit my tap perfectly and thankfully no more dripping! In case anyone is having the same problem, our tap was bought from Howdens around 2014 and is a kitchen 1/4 turn mixer called a Lamona Victorian Swan Neck Tap. This kit comes with the hot and cold tap cartridges and spare replacement ceramic discs and O rings etc, all for a cheaper (or at least equivalent) price to those I’d already tried.

Had a leaky tap and ordered these glands as couldn’t source locally. Arrived on time and exactly what I needed. Good product and easy to install.

attenzione alla misura del millerighe....non conforme alle misure standard