Alvin's CablesD-Tap to 0B 2 Pin Male Power Cable for Teradek SmallHD Z-CAM DJI-Ronin 45cm|18inches

Nicely made and dependable cable

Great tool.

Just what I needed on the field and prompt delivery.

UPDATE: Alvin sent me a replacement right away and it works perfectly!Cable didn't work because one of the pins was not connected to the wire. Returned. It could have been an isolated defect, as I've had success with Alvin's cables in the past.

Very Good Product.

My D-tap to 2-pin cable worked a brief amount of time before it shorted. The cable uses knockoff Anton Bauer and Lemo parts--expected for the price, I suppose. The D-tap side usually does not fail (and easy to re-solder if it does), but the Lemo side is either poorly soldered (pins are close together in the connector), and/or poorly protected from strain by the knockoff Lemo part. In my case, there was no strain on the connector; it simply failed. Thankfully I have short protection, but I would never use these cables again on any of my devices. The costs of liability far outweigh the cable savings. If your device uses Lemo connectors, chances are it's worth thousands to tens of thousands. There is good reason connectors like Fischer and Lemo are used in the highest-end air/spacecraft, marine, and military applications! If you want to save you'd be better off buying genuine Lemo/AB parts, and getting someone at an A/V shop to solder a cable for you. (An OEM D-tap costs less than $10, and 2-pin Lemo $20-30).My cable failure occurred months ago; I wrote 'Alvin' several times without reply. Having seen how quickly my cable failed, I would not use their cables with my gear again due to the great liability.

These cables have worked well and held up over time.

I used this cable for less than a week before a pin broke off inside the female connection on my teradek leaving me with an even bigger problem. There's a reason these cables are so cheap!

Working great with Zcam f6.