Deco XE75 Pro AXE5400 Tri-Band WiFi 6E Mesh System (3-Pack)

I had the non-Pro version of this and traded out of it to get the PRO version with the 2.5Gbe ports since I recently upgraded to 1GB+ internet at home. This works and works well, I easily get over 1GB throughput on my Mac Mini via the wireless connection using just the 5Ghz band. Pros are that it is dead simple to setup and use and works flawlessly out of the box. Cons are that it is NOT for tinkerers which I am one but I just wanted a simple device that did its job without getting in the way. You can't mess with the knobs and dials like some other wireless devices but what you do need is there typically. If you are considering this vs other devices here are the biggest reasons to get this: - mGig / 2.5Gbps ethernet ports - you'll need this to go beyond 1GB if your internet provider supports it. Most modern cable modems now have mGig ports that support 2.5Gbps speeds. You can, if you have the ability, tie these 2.5Gbps ports together to get a wired backhaul if it is necessary but it may not be. (see next point) - Tri-Band with 2.4Ghz/5Ghz AND 6Ghz channels. If you can, use the 6Ghz channel exclusively as your backhaul between the wireless devices especially if you only have two of them. This 6Ghz back channel will give you blazing fast speeds between the primary router device and the remote device. I'm not certain how well this works with more than two devices as you'll then be sharing the channel between three or more meshed units vs one but it'll still be more efficient than a dual band device. - ALL DEVICES THE SAME - I want to have all devices the same in case one goes bad or you need to swap them. There are other mesh devices out there but some have a ROUTER and then SATELLITE devices. This does NOT do this. Every device can stand alone as a router on its own or simply mesh itself together and be used for wireless only. It is a simple thing but you don't need to think about which is which nor worry should your ROUTER die and you have no internet connection. - Wired bridging between devices - Multiple ports allow you to plug in wired devices or another wired switch (which is what I do) and run several wired devices off one remote meshed connection that then backhauls via the bridge to the device active as the router. This works without even thinking about it. Plug it in and go. - It is FAST! - as I said - 1GB+ on Wifi 6e connection Mac mini - Nearly get that with my iPhone 15 Pro Max. At this point I've owned two different sets of these and the old non-Pro unit is at another family members home and working flawlessly. There are regular updates. TP-LINK as the brand could be the achilles heel. I'm aware of the talk about the Chinese brand and the lack of trust there along with some vulnerabilities with other products they make. You'll need to make your own decisions there. Final note - I have NO experience with their add-on products. How the premium services they sell work is unknown to me.

7/21/2025 initial thoughts. I bought the 3-pack but added one more unit for inside -- I'm sure 3 is plenty in most 2600 sf homes. But ours has a lot of angles & when the signal passes through too many walls, it degrades fast. I also bought another outdoor water-resistant unit for outside, so the signal to cameras is strong; we can also use Wi-Fi anywhere further away from the house. Even with all that, the Deco system is still less than cheapest Orbi system. Yes, it will cost you some money -- you can add more nodes later if you find really bad dead spots. The Deco units (Deco is TP-Link's brand name for this system) are easy to install too. I used Microsoft Co-Pilot to help me make decisions on where to install and the settings. Very helpful. The Deco phone app is best for setting up the nodes -- you can carry your phone with you while you do it. Make sure your phone is connected to the Wi-Fi. It is very straight forward and does most of the work. If will ask you to set up an online Deco account so that will carry all of your settings. First get one unit up and running so it will become your base. All the units are the same, so the phone app will guide you to set up the base. You are going to use this first Deco unit as the router home base. Then connect this base unit to the output port on your existing modem. Some modems have 2G ports -- use that one if not already taken, to connect the Deco to your modem. Gives you the fastest transfer rate between modem and router. FYI, an Xfinity acts both as modem and router. If you have any service (AT&T, Charter, etc) providing one device that does both modem and router duties, you'll need to do the following for a simple setup. You'll set this combo unit to "BRIDGE MODE". It will turn off Wi-Fi in the combo unit and reduces conflicts between devices. In my case, I use Xfinity. I think you can make this change through the Xfinity phone app. If not and you have some basic skills, login into the router interface directly (default IP is 10.0.0.1) and select BRIDGE mode. Now your gateway is only a modem, not a router. At this point, ANYTHING YOU PLUG IN will plug into the Deco router (unless you are a techie running more than one router). Now install and use the SpeedTest app on your phone to check for HIGHEST signal strength in the rest of your house. That's where you want to place other units, so they can talk to each other. A few feet in any direction can also make a big difference. I CANNOT STRESS ENOUGH TO USE SpeedTest (or other similar app) to find THE FASTEST other points in your house. Mapping this first saves a lot of headaches. TEST & TEST & TEST again. Test high points in the room (even near the ceiling) and test low! It's not even the same speed in the same space when you check high vs low. I think they recommend high spots BUT I did find a couple of chest level locations. The Deco app may have an automated speed testing feature for this, but I opted to use something I already knew. Also, make sure you have a power outlet near these placement points. I am really particular and like the cords hidden. Sometimes it's hard to get both a great signal and hiding the power plug. After placing the units and getting them online, I turned on "6G BACKHAUL" in the Deco units (that may not be the exact name) if it's not already turned on. The 6G frequency will be used almost exclusively for the Deco units to talk to each other -- leads to no interference from other devices. Most people do not have 6G or 7G devices yet. So you can TURN OFF the Wi-Fi SSID broadcast for 6G. Again, use ChatGPT, Copilot or whatever AI to help you find stuff in the Deco router. These changes are easily made in the Deco app once you find the right page. The app is better than the webpage, in my opinion. You can carry your phone around the house. Finally, do yourself a favor if you want ethernet (hard wired) connections at any of the nodes and have more than 2 wired devices to plug in at any node. Buy UNMANAGED network switches to plug into the ethernet ports on any of the Deco units -- all of the Deco units are the same. I have a switch in my office for the computer, printers, a few other devices that I wanted wired. Wired offers THE FASTEST speeds but really isn't necessary (I have 1200Mbps down / 40Mbps up -- YES, the up speed is low but that's all Xfinity home users get right now). Three ethernet ports on a Deco unit is not enough in some cases. Right now, I don't use the ethernet ports on any of the Deco satellites. Hope this helps. This Deco router is FAR SUPERIOR to the decade-old router it replaced. It costs a lot more than basic routers but was still cheaper than Orbi and is giving me full use of the speeds for which I'm paying. Good luck.

The TP-Link Deco XE75 Pro completely transformed my home network. Setup was incredibly simple through the app, and within minutes I had fast, reliable WiFi throughout my entire house. The coverage is outstanding. Dead zones are gone, devices roam seamlessly between units, and everything from laptops and phones to smart home devices stays connected without a hitch. The WiFi 6E performance is incredibly fast, and the 2.5G port is a huge bonus for anyone with high-speed internet. What impressed me most is how stable the connection has been. No random drops, no constant reboots, and no fighting with the network. It simply works, day after day. The hardware feels premium, the app is easy to use, and the AI-driven mesh system does an excellent job optimizing the network automatically. Five stars. If you're tired of weak signals, dead spots, or unreliable WiFi, stop looking. This is one of the best technology purchases I've made, and I highly recommend it.

I am extremely pleased with the 3 Pack XE75 Pro I purchased. Note that the XE75 (non-Pro) has qty 3 1.0 gigabit ethernet ports, whereas the XE75 Pro has qty 2 1.0 gigabit ethernet ports and qty 1 2.5 gigabit ethernet port. That's the only difference between them. So if you aren't purchasing a 1.0+ gigabit ethernet port, you might opt for the non-Pro model. In my case, there was a sale on Amazon and the Pro 3 pack was the same price as a non-Pro 3 pack. I was using a Netgear Orbi RBK53 unit with 3 satellites, and while the performance was OK, I wanted to future proof my home with a more powerful wifi 6E router. I have a 1,820 sqft 2 story home which was built in 1991 before moving to mesh wifi a single router was highly inept at reaching upstairs, where my speeds would drop off close to being completely unfunctional. While the house is not that big, my lot size with front and back yard included is 9,000+ sqft. For that reason, I didn't think of the 3 pack rated for 7,200 sqft in the marketing specs as overkill because I wanted wall-to-wall coverage from the far reaches of the front yard to the far reaches of the back yard. I got it and then some with this system. Setup was unbelievably straightforward. You download the Deco app (more on that in a minute) first. Then you unplug your existing router if you have one and replace it with any of the three units. The fact that it can be any of the three units was somewhat novel to me, because the Netgear Orbi approach is different in that Orbi specifically designated one device as the router (I had the RBR50 router) and the other devices as satellites (RBS50 satellites is what I had). With Deco XE75 or XE75 Pro, each of the devices is a super capable wifi 6E router in and of itself, each capable of covering 2,900 sqft of home space with up to 200 devices connected. These ports are auto-sensing, in that you can plug the LAN ethernet cable from your modem into any of the three ports and the devices will detect the connection and designate that device as the router. After the router is up, the app instructs you to simply plug in the other two routers and they will be detected and added as satellites, nodes, etc. (each manufacturer uses different language) and added to the network. It worked just as instructed, and I was up and running within 8-10 minutes. After setting up the devices, I simply unplugged the two satellites and moved each to the designated spot I had decided on in my home. Once the devices power back up in their new location they are immediately added back. I pay for a plan with Xfinity for up to 400 Mbps download and up to 100 Mbps upload. When I plug ethernet directly into the router I typically get 475-480 Mbps download and 12 Mbps upload (I don't know why they screw me on the upload speed when the web portal says I should get up to 100 Mbps upload, but that's neither here nor there). After playing with the satellite position a tad, I was able to get 475-485 on wifi over nearly every single square inch of my property, Even if I stand in the far corner of my yard behind a large tree I am still getting 380 Mbps. Lastly, I'll mention that the app is fantastic and highly capable for novice and more advance networking setup. You can name all the routers, name all client devices, set up push alerts when designated devices join and leave the network, set up a routine router reboot schedule, and so much more. And most of all to me what I like is that you can access all of these settings while away from the home. For some reason, with the Orbi app, Netgear required you to be home and on the home wifi to access these settings. This was my first TP-Link product purchase, and I am extremely impressed. Highly recommended.

Update 9/24/25 The mesh has gotten a bit more unstable overtime requiring occasional reboots. And just today, it randomly lost connection. I pushed out a command to reboot, but it looks like it erased all my settings after it completed the reboot. Not happy about that. Messed up my smart home setup which takes a lot of time to set up. ---------------- Love the performance and features, hate that certain features are hidden behind a subscription wall. The WiFi-6E connectivity is truly amazing, coming from a Google Nest WiFi setup (WiFi-5), especially for my devices that support 6E. Even for devices that do just WiFi6 (non-6GHz band) the speed improvement was over double. It all worked with all my devices, including my smart home/IoT device. Love that I was able to steer specific devices to specific APs and specific bands for better performance or reliability/compatibility. The connection reports are also very nice. There's a ton of features available through subscriptions as well like advanced filtering, VPN, etc. Unfortunately, advanced parental control was one of them. This was all including in my Google WiFi setup. Here very basic parental control is including, but being able to set different bedtime schedule for my son for weekdays and weekends is only available in the advanced parental control included in the subscription. It's $18/yr. which isn't terrible, but it's just another hand in my pocket that I don't really appreciate for a basic feature that I previously had without a subscription. Connection was a bit wonky at first, but according to documentation, the AI learning feature will improve performance and stability of the network. Don't know if it's placebo, but it does seem to be better as time goes on.

EXPERT ANALYSIS: Coming from Orbi RBK50 AC3000 system that works flawlessly but was looking to upgrade to Wifi6E temporarily until Wifi 7 is standardized otherwise would have stuck with Orbi as it is unbeatable even at the crazy prices as QC and logical setup is just not there on the DECO devices no matter how hard I want it to be... (NOTE: All current DECO Mesh models have same Pros/Cons) PROS: 1) Overall connection stable on latest firmware and wifi speed is decent. Generally 1152-1729 or so if connected to Deco in same room. NOTE: This is not actual speed as I will explain. Tested from Galaxy, Oneplus and Lenovo devices. I won't go into my exhaustive testing over multiple days on network with 50+ devices. 2) Signal strength = On par with Orbi RBK50. Deco has a slightly lower transmit/receive range all around 1-acre property. Getting real world speeds of 400-864mbps in same room with a device using local open Speedtest server on 1GB backbone. 3) App is nice and easy as is setup for novices but this is where the pros end CONS: And there are many very BIG MISSES here that are just unacceptable: 1) Cannot change channel frequency to avoid interference with neighbor/other wifi orverlapoing. ...And the app detects and shows interference so it doest change automatically either to avoid. And this overlap is with 1 other network, so not like space is congested like in a city environment. Terrible implementation 2) Fast Roaming is BROKEN and simply does not work. Devices (I.e. Phones/laptops will stick to the device they first connect to and not change to closest device automatically, so need to manually disconnect/reconnect to get higher speeds which is frustrating. I do find it switches to 2.4ghz speeds from 5ghz on the same 'distant' mesh device rather than connect to the one 2 feet away. Crazy... 3) Cannot separate 2.4 & 5ghz bands so many devices like smart switches/plugs/bulbs that Amazon sells and require 2.4ghz separated to set up, so these will not work. 4) Cannot assign Static IP address in AP mode so picked up random DHCP. 5) In Router mode you can but guess what, cannot turn off DHCP server so that is useless as well 6) Cannot dictate hub vs spoke i.e.- Mesh decides itself if daisychaining to another Deco instead of main Deco router device. 7) Cannot set RTS Threshold or preamble 8) Web console lacking any advanced features an expert would be looking for like those above. It is OK the App is missing these for the average user but fot the Pro user, these options should at least be in the Web console To recap...this could have been an amazing device if TPLINK would have put a little more effort and QC into the device. I would love to have work with their engineers to get this right as it seems they just didn't have a good product roadmap. Guess that is the CIO for last 10 years speaking but many of the misses can be fixed with firmware upgrades if TPLINK wanted to. Now will they do it...

I purchased my TP Link in September 2022, following an upgrade to my internet service to 1.2Gbs. My house is long and narrow, and my new internet service was set up on the ground floor in the very back of the house. Not optimal for WiFi coverage, to say the least. I tried various solutions like extenders, more powerful WiFi, etc. Then I came across the concept of a mesh network and dedicated back-haul, and I knew that was the solution I was looking for. But *which* one? Enter TPLink, with a competitively priced solution that included 6e dedicated backhaul and a 2.5Gbs ethernet port. So I pulled the trigger and bought the two-node TPLink Deco. I worked out the placement of the two units - one next to my modem and the other upstairs in a hallway that gave me good coverage to the rooms and line-of-sight to the downstairs Deco unit. Not having any 6e devices, I configured the dedicated backhaul option over 6e since my house is not conducive to running cable (remember, long and narrow...). It took a little fiddling around in the app to set everything up, but once configured the two units connected and everything looked Ok. The good: So far (almost a year in service) no reliability issues and very stable internet connections when roaming about the house. Sometimes the app shows a device attached to what I would consider the "wrong" access point, but I don't pay much attention. I have a "smart tv" with streaming over the 5ghz channel and have had zero issues with streaming Sling, Prime or Samsung TV. Often while my significant other is also streaming a YouTube so there's bandwidth to spare even on the 5ghz channel. In summary, it is reliable and fast. The Bad The app is very basic and you don't have any view into the underlying configuration or how the devices are communicating. You just have to trust the Deco is connected over 6e because it doesn't really say (at least not that I have found...). There are some configuration options, but they seem hidden and not well explained. Most likely you won't need them, but it is good to know how to change your DNS for example, if necessary. Also, add-on costs like firewall and monitoring are not included in the price so plan on a few $ per month for the firewall and other security options. In summary, the app is not that great. Performance My peak performance, as measured over 5ghz Wifi is 1385Mbps connected to the base unit near my modem. (see attached screenshot) Across the mesh I get 800+Mbps in the far reaches of my farthest room. (880Mbps in the screenshot) Still spectacular compared to my old setup where I would struggle to even get a signal!! More than enough bandwidth to stream even to the far reaches of my long, narrow house. Summary Deco accomplished my goal of reliable, high-speed coverage of my long and narrow house. Bonus that it has the 2.5Gbps ethernet port so I can get peak performance to my modem and use all of that gig internet speed. Reliability has been rock solid. The only drawback is the lack of configuration options and add-on services for which you must subscribe.

Love this TP-Link Deco XE-75 Pro (3 ports) and only wish we had bought this mesh system years ago. I’m no techie by any stretch but installed this system by myself in less than 30 minutes. Our speeds have improved way beyond expectations, even in our above-the-garage apartment which was mostly a dead zone. We’re now getting consistent download speeds of 297+mbps. Could not be happier with the ease of setup, the app and performance. Highly recommend.

Avoid this product. failed after a couple of months.

Excelente Deco , fácil de usar y sin problemas crea tu red y listo a disfrutar wiffi sin cortes o baja potencia wiffi .

Tiene muy buena cobertura, este es mi segundo Mesh para diferente casa, este cubre casi todas mis necesidades. El único problema pero ya es por mi ubicación sería mi timbre (tengo un Ring Doorbell 4), el cual le falta cobertura hasta la puerta para que llegue a la banda 5GHz, con la 2.4 no tengo problema de cobertura pero baja la calidad de respuesta, así que en mi caso tendré que poner un Deco outdoor. De ahí en fuera cumple con lo que promete.

The TP-Link Deco mesh system has easily become one of my favorite upgrades in my entire home. I’m genuinely blown away by how stable, fast, and reliable it is. After dealing with weak spots, slow speeds, and constant frustration from older Wi-Fi setups, the difference with the Deco system is night and day. Setup was unbelievably simple, and once everything connected, the whole mesh basically optimized itself. What really impressed me is how consistent the speeds are across all three floors of my home. The basement, main floor, and upstairs all get fast, smooth performance, and even high-demand devices like my Apple TV 4K, Xbox, and iPhones all run flawlessly. It feels like I finally have the network my home always needed. The design is clean and modern, the app is extremely user-friendly, and I love being able to see which device is connected to which node at any time. The system just feels intelligent. It automatically manages the wireless backhaul, balances the load, and keeps everything running without me having to babysit it. On top of that, the Deco units stay cool and quiet, and the entire mesh handles heavy use without any drops or slowdowns. I can stream, game, run smart-home devices, watch 4K content, and do everything at once with zero issues. Overall, the Deco mesh system has been one of the best purchases I’ve made. It completely transformed my home network experience. Fast speeds, seamless coverage, great design, and excellent reliability. I’m extremely happy with it and would absolutely recommend it to anyone who wants a rock-solid Wi-Fi setup.

Durante muchos años he batallado con el rango del Wifi en mi habitación, tenía muchos problemas de conexión e inestabilidades con dispositivos inteligentes como el Philips Hue bridge, aires acondicionados o luces de la marca Nanoleaf, me sorprendió lo fácil que es instalar la red mesh y de lo practica que es. Pensé que el segundo nodo tendría que cablearlo debido al poco rango de mi red, pero mi sorpresa fue que se conectó automáticamente al nodo principal y no ha tenido inestabilidad alguna. No he tenido caídas de Wifi, desconecciones repentinas o Wifi lento. Al nodo 2 le llegan los 200mbs que tengo contratados y son estables, puedo acceder a mis dispositivos con facilidad y puedo tener un control sobre quién esta conectado a la red desde la aplicación del fabricante. Sin duda lo recomiendo para aquellas personas con problemas de rango de red en una zona en concreto, y sobre todo para esas personas que tienen problemas de inestabilidad con dispositivos inteligentes. La red a la que te conectas "creada" por el deco es una sola, y en automático te conectas a 2.4ghz o 5ghz, por lo cual puedes acceder a luces, aires, etc en cualquier momento.