🚤 Elevate Your Boat Game with Effortless Mounting!
The Stern Pad is a versatile mounting block designed for small to medium transducers and other devices on your boat. Measuring 4.5" x 3.5" x .75", it features a robust adhesive backing that withstands saltwater immersion, ensuring a secure hold even at speeds over 65 mph. Installation is a breeze, taking less than 5 minutes without the need for drilling or additional adhesives. Plus, it can be removed without damaging your boat's hull, making it the ideal choice for boaters looking for convenience and reliability.
J**G
Pad is fine; transducer mounting was a process
I applied the block per the instructions and it has been rock solid. However, I had the transducer fall off twice because the screws stripped out of the material. I will say it was on a very stumpy lake which is the ultimate test. I went back and used some smaller sized screws and the last outing the transducer stayed in place. I think it would have been nice if they provided some mounting hardware they recommended for their adhesive block since it took some trial and error to find something that would work.
M**E
Didn’t last 6 trips on the water
Pad is still attached to the boat so the adhesive is working. But the material sucks as the screws blew out for my transducer - which I hope isn’t internally damaged after flopping around at 40mph on the water.
J**D
Trash
Installed as directed bumped transducer with my knee and it pulled the screw out! Do not waste your time and money!
C**N
Terrible
Terrible. It’s a hard plastic outside layer about 1mm thick and then soft foam inside. You can’t torque your screws in it just continuously strips.
B**
Don’t buy
First ten minutes on the water came off the back of the boat and ripped my transducer wires. Do not recommend!
T**I
Not recommended. 👎🏿👎🏿👎🏿
Too soft of material screw won’t hold on tight when tightened. Easy to strip. I already mount it, if I haven’t put screws in it I would return it.
A**R
Doesn't stick!
Totall crap. Doesn't stick. Had to use JB weld. The brand on the right worked perfectly. This brand is crap!
W**U
Clean and cure for strong hood
This mounting block not only saves me from having to drill into the boat, but it makes installation of anything faster since I don’t have to take any additional precautions to not damage anything that is directly related to the boat. This mounting block comes with the prep pad in order to get a nice clean surface for mounting. It also comes with cable clips that have the 3M adhesive on them as well. This is ideal for keeping the cables of any item that I’m melting secured to the hull. The 3M adhesive on the back of the mounting block is extremely strong. If the directions are closely followed, adhesion is insanely strong. It is key to have an appropriate surface area—both in size and texture. It is also imperative to make sure that the surface is clean before adhering the block. Lastly, the adhesive needs to cure before drilling into it or hanging anything from it.
Trustpilot
1 month ago
3 weeks ago