Technical parameters: support protocol: hdmi 1.3, hdcp 1.2. Video compression format: h.264 pixel bandwidth: 165mhz, all numbers interface bandwidth: 6.75gbps maximum supported resolution: 1920×1080p @ 60hz impedance: 100ω recommended maximum hdmi input/output ratio: less than 5 meters, 1920x1080p@60hz resolution infrared interface: 3.5mm jack infrared signal direction: one way transmission infrared input level carrier frequency: 20 60khz wifi rf power: 802.11ac radio frequency: 2.4ghz/5ghz transmission range: 200m power: dc 12v maximum current consumption: max 9w working temperature: 5 degreec +70 degreec humidity: 5% 90% size: 1127928mm support infrared remote control remote expansion, display remote source equipment, easy to install, plug and play packing list: hdmi extended transmitter tx 1 hdmi extension receiver rx 1 2.4g / 5g dual band antenna 2 psu 2 ir infrared transmitter 1 ir infrared receiver 1 user manual 1 product pairing steps: 1. Connect the hdmi output of the transmitter to the hdmi input of the receiver with an hdmi cable; 2. At this time, ir and ir output may not be connected; 3. Connect the transmitter and receiver to the power supply respectively; 4. Wait until the green "sta" indicator lights up, first press the "reset" button on the transmitter, and then press the "reset" button on the receiver; 5. At this time, the green "sta" transmitter and receiver flash 6 times, and then flash continuously, indicating that the pairing has been successful.
Trustpilot
3 days ago
1 week ago
