Mounting Dream Monitor Wall Mount for Most 17-39 Inch (Some up to 42 inch)，UL Listed TV Mount TV Bracket with Articulating Arms Tilt Swivel Extension Rotation, Up to VESA 200x200mm and 33 lbs, MD2462

Great for a 32” TV. Easy to mount on a single stud and has enough hardware to mount at least a dozen different types of sets included in the parts

The only mount that would fit the tv and in my camper area

Easy to install and works great. This is the second tv I have used this brand for, and I would recommend it.

Surely it’s a great mount, I didn’t know it was for 32” meaning I should read the listing more but it is working perfectly fine for my 55” and 65” tvs haha just had to do a little modification.

I assembled this after my family gave up on it. I guess it looked too intimidating to start working on, so they left it to me...I actually had some trouble drilling the holes in the studs because I'd never drilled into a wall before. I also had to use a stud-finder. That being said, I did get the hang of it and was able to safely set this up and put a TV on it all by myself.I did NOT think that the little wrench in the box was appropriate for installing the big screws into the drilled holes in the wall studs. The fact that the screws had screwdriver scorings on them was ridiculous. Nobody in their right mind would take the time and expend the amount of effort needed to screw those things into the wall.I think it should be made absolutely clear that you need extra tools to complete the installation. I was able to use a socket wrench with one of the handles that has a winch on it. It still took a bit of time, but that was infinitely easier than using the aluminum cookie-cutter tools in the kit.Anyhow, besides aggravation on the install, I think it's a great stand if it's holding a TV in a place that isn't going to be bumped. The TV can easily be rotated I think 360°, like the hands of a clock, on the XY axis. This allows you to customize which direction you want your TV/monitor to be presented in (landscape/portrait). It's a nice feature, if you're going to use it. I'm a little irritated by it because every time I bump the TV, I have to dig out the level (one came in the kit--- nice!) and gently poke the TV back to the proper orientation.Also, the directions say not to use the stand if your drywall is thicker than maybe half an inch or so. Mine drywall is actually an annoying 0.75in thick. I broke the rules. I prayed that it would work and made sure my bolts were in pretty tight. The TV has been up there for a few months, so I don't think it's going anywhere. My TV isn't huge, but it is pretty big. I think it weighed around 15 lbs (,and the TV stand directions say you can put up any TV <=25lbs). This is just my experience. My installation was a success, even though I broke the rules. I'm not saying you should do it, but it might work, if you run into the same problem...I hope this review helps someone who goes to install this. Make sure to find a nice socket wrench for those big wall screws! It's a good stand for the price. The actual stand feels like a quality piece of material. It's some solid metal.

Mounted a Hisense 32" H55 (model # 32H5500F)Quality: I'm impressed with the quality of this mount. With the amount of crap available these days, it feels like a major score to receive something in the mail of good quality. The hardware that needs the most torque can be installed with a large screwdriver or wrench, reducing the possibility of stripping the screw out. Threads are cut well, and when everything is in the right place it all lines up for easy assembly.Assembly and Installation: It comes mostly assembled. The only part you have to put together are the brackets that screw to the TV, which makes sense because even though the distance between screw holes is standardized, the bolt patterns on the backs of TVs are not standardized for some reason. The instructions on how to do this are very clear and easy to follow. All the parts are numbered to make assembly a cinch. If you are capable of using a stud finder to locate a stud in the wall, you can install this on your own. You'll need an electric drill and socket for attaching it to a wall and a screwdriver to attach it to the TV. A wrench comes with it, but I didn't use it. The coolest part of the whole thing is the included bubble level. It has a lip and a magnet that fits perfectly and will not fall off while twisting the mount all over the place as you try to screw it to the wall one handed. I'm actually keeping the level for future use!Positioning of the TV: It moves in every direction possible, even tilting up and down. It will fold up within a couple of inches of the wall for a very clean look or stick straight out about 12". I mounted a 32" TV in my wife's home office on the wall above and to the left of her desk. The mount sticks out from the wall far enough to angle the TV towards her desk chair and tilts down for a direct line of sight from her seated position. It turned out to work perfectly for this location and size of TV.Overall, I'm very impressed and will be buying more of these mounts for other rooms we are adding TVs to. I highly recommend this mount for smaller TVs.

Easy to install

I bought this to mount a Skyworth TV in my RVI like that you attach the mounting plat on the back of the TV and then you can hang the tv on the extension arm and install the two mounting screws to lock the TV in place and easily do this by yourself instead of trying to hold the TV in place while trying to thread screws in to back of the TVEasy enough if you have a helper but pretty darm hard to do on your own.

Mounting Dream TV Wall Mount Bracket for Most 17-39 Inches LED, LCD TVs with Articulating Arm, Full Motion Mount with Tilt and Swivel for Max VESA 200x200mm and 33 LBS Loading MD2462.~~~~~~~~~~~Very easy to install... I did it all all on my own and it was quick too as long as you have a couple extra geveral tools that doesn’t come in the package.This tv mount is the best valued product for your money, and again it’s so easy to install.~~~~~~~~~~Sept. 1/20 - I just ordered another one, and it came on Friday...with the Snap of a finger .. done!Thanks for the great TV mount product...my 2nd I’ve in a month. :)

tres bon produit vient avec beaucoup daccesoires pour differentes tele cependant les instruction son un peu compliquer a comprendre mais a la base cest pas vraiment compliquer a assembler et il y toute le materiel pour differentes teles et pour le orix tres bonne affaire parfait pour attacher ma vieille samsung 32 pouce flat screen dans le garage !!!

Very happy with this mount and the cost. Package includes everything needed (except for tools). Screws for many lengths and threads of TVs/Monitors. The paper cutout makes allining and marking where to drill your holes.As others have said, the screw heads can strip if you use the wrong bit. When using a thick Philips bit (PH3) there is no problem. PH1 & PH2 will most likely strip the head. The screw head also is designed to accept a 3/8 socket that worked great.

Buen producto, fácil de instalar. El único pero es que hay que estar apretando la tensión para que la TV no se incline hacia adelante (y eso que la tenemos con una tele pequeña, de 32"). También, quise poner la tele en posición vertical y no se sostuvo. El lugar donde nuestra tele se sujeta al soporte no está en el centro, sino un poco arriba (con la tele en posición normal horizontal), por lo que, al pararla, hace palanca para regresarse a la posición horizontal.

Make sure you ask the question first, "does it work with my TV" before you buy it, well I had to do some modification to mine because it didn't work with the new 32" RCA we purchased for the Hotel. the holes don't align.