3 Inch Caster Wheels, Heavy Duty 3” Casters Set of 4 with Brake, TONSUM No Noise Polyurethane (PU) Wheels and Safety Dual Locking casters, Swivel Plate Castors (Two Hardware Kits)

These feel nice and solid. Wheels turn well, brakes work, and they were easy to install.I bought these to install onto a Fido dog house after its base snapped off. The edges caught on the loops of the berber carpet and the particle board cracked, then broke off entirely.I removed the remaining pieces of the base. Made roughly 3/4” x 5” x 5” square base supports for extra thickness, and then attached them to each corner. Then I mounted these wheels on those supports.Turned out pretty well. The dog house now moves easily when needed.

I used these to support a heavy duty 100 lb dumbbell stand, which supports an additional 670 lb of weight for a total of 770 lb on my heavy duty rubber mat floor of my garage gym.Once I was able to outline the hole location and then drill the holes for the wheels, it was easy as cake to install them. These roll very smoothly, even supporting 770 lb and are about as maneuverable as you can expect for carrying such a heavy load. The locking mechanism works well, too.I was debating buying 4 inch wheels with a 220 lb capacity just to be safe, but these claimed 1000 lb capacity wheel appear to be holding up just fine after a few days of use.The screws and bolts for whichever installation you prefer was a huge perk. Also, the bolts and nuts are decent quality hardware. I have often seen such inferior quality hardware that I needed to buy my own hardware at the local hardware store because I didn't trust the stuff included. Not the case with these. They are grade 4.8 hardware, which is good enough for the application.

Constructed a simple 5x5 table for our new freeze dryer using 4x4 legs. Wanted casters so we could easily move the table around in the garage. These 4 caster were excellent!Smooth movement. Easy to lock and unlock. Screws and bolts provided for multiple mount configurations. Hold several hundred pounds with ease. And the cost was budget-friendly.A terrific value I would purchase again for my next mobile table need.

These are excellent caster wheels. I like their rated load at 1,400 lbs on all 4 casters. Others are claiming from 2,200 lbs to 2,400 lbs. The wood screws they supplied are very high quality stainless screw.

2 spun really free. 2 didn’t so I adjusted.2 had sloppy loose casters. The other 2 were worse. Couldn’t adjust those.Wood screws worked really well. About 1” long. Needs a pilot home. Really soft metal so strips easy but probably keeps them from being brittle.

I'm pleased with this purchase and the table I attached the wheels roll around smoothly. The brakes are sturdy on a flat surface and keeps the table in place. I'm very pleased with my purchase and I highly recommend it to other buyers.

The media could not be loaded.  These casters are sturdy and smooth despite the weight.

I used these on a DIY work table that’s about 3.5’x8’. It’s a Good amount of weight so I was worried, but they work great. The locks are easy to use and I can move the table with relative ease.

Happy with this purchase. Great value and appear to be well made. The addition of (Phillips / cross head) screws and washers for install is a nice touch, saving time and additional expense! Comes with a screwdriver with reversible bit too, if you don't have one. Installed these 2" casters on a base I made for my 150lb drill press. Only just installed, but they roll well on my rubber mat covered concrete floor and lock solidly. Would happily purchase again. Waiting for the 3" to come back in stock for my next project...

Brilliant castors for a cheap price. I got these for my small homemade work bench for which they are ideal.

These casters are firm smooth and solid.it would be good to have them available in a package of two for different applications

Great quality spare stews and washersUsed in my garage mounted on plywood then have storage box’s on top moves around easily

Look nice and perform well. I attached them to a 32" circular piece of 3/4" plywood to use as a tire dolly. Have 4 factory jeep rims with 265/50 R20 tires on it and they roll around easily. Locks work easily and do a good job. Nice that they supply both bolts and screws/washers. Note that the included screws are 1-1/4" long, so if you're attaching them to thinner wood as I did, you'll need to purchase shorter ones.