Creality Smart Kit with by WOL3D Creality WiFi Box & HD Camera|3D Printer WiFi Connectivity Camera Kit|Wireless Printing (2)

The media could not be loaded.  I bought it in a sale for around 17k . For this price range it's the best 3d printer available in the market. The bed adhesion is good. The print quality is excellent. Works best with creality filaments. But you need a heated enclosure for abs printing if not so the print may fail,not may it'll definitely fail due to uneven heating between layers. Also you need to set a perfect value for z offset.

PROS:1. Nice printer for the price range.2. Easy to assemble since.3. The first print came up quite nicely using the models provided in the SD card that came with the printer.4. Came with v-slot cover which is quite useful and adds some color to the printer.5. Easily upgradable.6. Using the magnetic bed came with printer, adhesion was good enough and prints came off quite nicely in the start.CONS:1. The bed is slightly warped in the middle. So whenever you are tramming the bed, it would look fine on corners and the minute you go to the middle the nozzle is too close. And if you adjust it on middle the nozzle will be too far when it moves out from middle. Which I fixed initially using some tape under the magnetic top bed.2. Print bed is not a good quality one. After few prints the top layer in the magnetic bed started coming off with the prints creating small black dots in the print.SO.... if you are ready to shell out some more money on a BL Touch/CR Touch sensor and/or a glass bed. This is a good printer.

I've been using this WOL 3D Creality Ender 3 Pro model for over a year now.The 3D printer came in a Semi assembled form (means all the electronics were already assembled on the base... we just have to raise the pillars and it's attachments. It was easy to follow the instructions sheet in the beginning and most part of it... but few steps were tricky. I would suggest people to watch Assembly videos online when assembling, especially the printing head.Magnetic Surface Plate is good. It doesn't need any extra clamping and its flexible enough to easily remove the prints. The temperature is consistent through out the surface. The surface plate gets to the required temperature within 3-5 mins.We any power cut happens, the Resume Print function works well too... Just make sure to stick masking tape to the base so that the print doesn't come out.The SD card provided contains the easy-to-use 3D printing Cura software and a couple of 3D models to test the printer after assembling.The software to is easy to understand and use. Lots of YouTube videos are available for understanding the software too. It would be good if the software highlights if any discrepancies are present on a 3D Scanned models.The only time taking process is levelling the surface plate. Take as much time as required to level it to get a great print.The Customer support is also commendable as they are resolving any issues we face instantly or at the earliest.In short - Good printing quality, reasonable cost for the beginners and good performance for the enthusiasts.P.S. Place the printer in a ventilated area when using ABS filament and follow the temperature settings mentioned on the spool for any type of filament you buy.I'm planning to get the self-levelling and laser module next for my WOL 3D Creality Ender 3 Pro model.

The media could not be loaded.  After using this product for 3-4 days, this is my experience. The product is good quality, everything required was in the box. Quick and easy delivery by Amazon as always. Assembly was easy and we'll instructed in videos provided in the SD card. Now let's see the cons.The printer was in good shape and worked straight away. The problem was the built plate. It is warped in the middle. So even after leveling all 4 corners perfectly with the paper test, the center still rubs hard against the nozzle.Now I spent 2 days trouble shooting it, from what I found, the actual bed is perfect only the built plate is warped. So as anyone would do, I contacted Wol3D for help. Now here's how it went.The first thing they said after I explained them the problem was "Warping is not possible". And their solution was using glue sticks. From this I understood, these people have no idea of what the are talking about.After providing the video(added in this review) demonstrating the problem, they asked me to make a hole in the center to let out air. Now this is reenforced fiber bed, you can't just use a pin to make hole in it. I did contact offical group of Creality for suggestions and there they asked me to replace the plate as making a hole was not the solution.So obviously I asked for a replacement bed. And these people straight up blamed me for warping the bed. After some talk they said the bed was not under warranty and they can't help me.So now I have ordered a new bed from other seller.My advice to you is, buy from a better seller. These people don't know anything about 3D printing.

First time I order the printer and install everything but print was not coming good. Because bed level of four corners are good but the center part of the bed is slightly raised ahead. So my print was totally damaged. I noticed this is a manufacturing defect.And I rise replacement request via Amazon customer service the guys are so good they understand the problem and replace the product. Today I received new one from Amazon via replacement policy.But this time the printer do his duty well more than my expectations. Overall I am so satisfied finally. I suggest this printer to everyone.

I love this printer. It produces higher quality prints than older generation Creality printers I've used before. It prints fast and it comes with wifi; which is convenient but can only be used with creality's software. I've had it with Creality Print though as it is a terrible software that crashes frequently and cost me many failed prints. I've since switched to the Cura slicer and now get perfect prints every time with this printer.

Excelente, antes do prazo e produto lacrado.

As with any "new" product their is a learning curve! This product was not different, but with help from supplier and youtube videos I was able to resolve some frustrating issues. The printer is working with no faults and I have noticed items are coming away from the glass bed with relative ease.Very satisfied with the Ender Max Neo and will continue to support this supplier.

The media could not be loaded.  Assembly is super easy it was a little difficult to line up the holes to screw it together but others no issues. I'd suggest watching a tutorial on YouTube for clear instructions. The manual is helpful but It is vague on some of the setup. As far as printing goes once I leveled the bed properly my test prints came out flawless! This is my first experience with anything 3d related and I am very happy I started with this printer. The automation takes away alot if my stress. Once again I highly advise watching YouTube tutorials for assembly and print setup! The bed is super adhesive, I had to level my bed initially because it wasn't sticking, but that's operator error not printer error. I thought I'd want a touch screen but so far using the knob is super easy. Would recommend for any beginner.

The Creality Sermoon V1 3D Printer is one of the best to buy and use for home or office or small business. The app is so easy to set up use make money with. Custom Cars USA hase the Creality Sermoon V1 3D Printer on there Amazon Store and its the best selling 3D printer. Grate looking printer in my Home Office.The printer is a must for Youtubers that are makers wanting to get into 3D printing.