Vevitts Small Brushed Permanent Magnet Electric Motor for E Scooter Drive Speed Control 24V 350W 3000RPM

I actually bought this motor to restore a razor mx400 i bought off of marketplace, and heres what i think despite a razor mx400 having a weight limit of 140 pounds, the stock motor would generate insane levels of heat. This one has quality, as it doesnt even heat up that crazy for a beating. I weigh 177 pounds and it drives like i weigh less than 140 fits very well, no problems at all, and the speed caps at around 17-18 mph, 3 mph more than a stock mx400

I've had this installed in a Razor e-300 scooter for 8 months now and it works great. It has a great top end and acceleration, and it has a higher than average RPM so it is doing more than most other models which push less RPMs. In addition, I must note, that I had a dud originally. But the seller offered a replacement and this one is flawless. As I said, it's been 8 months now and it is still strong, and that is with decent use - probably 8 miles a week I ride it. I mention this about the replacement as the seller was very easy to work with and stood by his product, unfortunately, the opposite happens at times but it didn't in this case. So I appreciate how well this motor works and for the seller offering a replacement for the dud.

This fits perfectly on my son’s razor dirt bike. The motor works as it should and doesn’t get overheated.

These can rip; will update with how long they last.

So as you can see here I have a razor mx350 I got a couple months ago to ride with my girlfriend around town and junk and it's been really fun. That being said she's about 50lbs lighter than me so her stock bike would go 1-2 mph faster and she would just abandon me on adventures free as a bird (tbh who could blame her.) naturally I got sick of being slow quite fast so I upgraded the entirety of the power delivery system to 36v with the help of jordybuilds and a fancy battery I got from here I believe a cao mm battery. The bike was fast as hell hitting 21 on flat (given a 50% power boost I'm not shocked to get 50% of the speed added as well) the thing was an absolute power house. Only problem was that stock mx350 motor produced uncanny amounts of heat on a small 2 mile scoot. So I ordered this on a whim and replaced the stock motor. The bike now runs a solid 22 on flat with a full charge and can easily go 5 miles before the heat starts to become super noticeable. I haven't taken it further than 5 miles (waiting for a my1020 motor as a backup just in case this vevitts dies but it's seeming less likely by the day.) the motor is fast runs smoothly and handles the overvolt like a dream. Given the 20+ miles I've out on it in about 3 days I can't say enough good about it's performance The only cons I have for this motor is that the leads have VERY minimal shielding. I made sure to wrap them about 4x in electrical tape to try and keep them protected but I do think it's something vevitts should consider in the future. Maybe a slightly thicker gage on the leads as well they are a bit small to mount into the plugs for the original motor on the mx350. My motor also shipped with a slightly bent mounting bracket however I got 3 bolts in and it's solid/straight enough so I'm not pressed. All in all it's about a 3.8/5 and climbing every day as I abuse it. Would be happy to find the information for this company and work with em directly on something silly small and stupid like this again. Good buy

This motor did work well and fit my e300s OK in the space properly except for the bracket mount itself. The holes in the bracket are tapped holes where my previous motor mount was not tapped. My original bracket also had countersunk areas where the flathead cap nested into the bracket. On the new motor mount screw mount holes I had to create the counter sink area with a counter sink tool and open up the holes with a 1/4’ drill bit,so the mount had some free play to fit between all 4 screws and the screw tops were flush like the original, not stand /stick up . See my photos.

I do 36 v on it works good but then I put over 300 lb on the scooter it melted but under 265 is ok

Works great, easy to swap out and brought the bike back to life. Update: it’s been about 9 months and this one burnt out as well but it did last some time. My son is also really hard on it, maybe with lighter use it would last longer. Just wanted to share my experience.

El producto llego rápido y salió muy bueno!!

An awsome motor,just need to replace the pinion gear to my wheel sprocket,for the same chain ,which is t8f chain,which is a challenge, but I will fab it to fit.

Good

Le moteur est très puissant

I have placed a rotary encoder on the shaft and measured 2995RPM this motor according to my mesurements is a beasttt. Have not connected it yet to a system will give news.