GoolRC Trailer Car Hopper Trail for 1/10 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car DIY

Don’t think this trailer is worth the money. Yes it is cheaper then the others, but then you factor in buying new tires for it because they are too tall, and raise the trailer too high for the standard Trx4 or axial rig.. then... it’s more money. I flipped the axle trying to lower it. Then I tried lowering spring height on the shackles still TOO high. You need to buy a set of 1.55 dirt grabbers or similar if you are buying this trailer and you will also need 1.55 wheels. Otherwise put a 7/8 “ lift kit on your truck. Or look elsewhere for a trailer. Then the hitch... well it doesn’t mount on a normal receiver. So you can toss it and pick up a hitch while your at it. By the time your all done, ya got about 80-90 into this “cheap” trailer. Trailer construction itself is decent. But that’s it.. everything else can be tossed because you can’t use the tires or the hitch pin(unless you screw it into your bumper directly)

As others pointed out, the Z-bend in the tongue is stupid. Makes the trailer tilt forward. I've straightened mine, but the threaded part is just tacked on and it broke off. I cut new thread on what was left. Would've been nice to have the extra 1/2" though!I also shortened the front leaf spring bracket, because it kept getting caught in everything.As far as for connecting it to my car, for more articulation I popped out the brass ball from the connector link and used a D-shackle on a cheap hitch mount. It performs really well!

trailer is a nice little trailer for the inexpensive money. However, be where. The only metal are springs, and trailer. Wheels are not metal as indicated in the description.This is for a scx10 iii JL and JT and was surprisingly a little too high for both, which was not good because I wanted to put matching wheels on this trailer. The only way that I might be able to fix this is to either cut the hitch mount off and make a new one, or try to carefully bend this flat; which might hurt the integrity of the hitch mount arm.It is an inexpensive trailer that can do the basics.

Well made and works great for my unconventional use and abuse.

Fits great to my Traxxas TRX4 with the TRAXS on. You need about 4 1/2 inches of receiver distance from the ground or the Trailer won't ride flat. Although there are no instructions. None are really needed. Just be sure to remove the little screw holding the springs together before you try to mount onto the axle. I tried to upload a picture from my phone but wouldn't work.