Ingersoll Rand 2115TiMAX 3/8" Air Impact Wrench, 300 ft-lbs Torque, Titanium Hammer Case, Friction Ring Retainer, Pistol

Very powerful little gun when combined with the right compressor. I run a 80gallon tank at 175psi and 15cfm at 90psi. This thing breaks bolts lightning fast. It's light weight and ergonomic design make it a pleasure to work with all day. Although it may be small, what it lacks in size it makes up for in torque. I also have a HF 1/2 impact and it is on par with that. I recommend this gun especially for those doing suspension and brake work. As it is small enough and powerful enough to get the job done efficiently (Assuming you are skilled at what you are doing). I would also recommend complimenting this tool with IR 86 piece 3/8 1/2 impact set. They go hand in hand and were made for each other. At this price, you cant go wrong. For the amount and quality you get for your buck, you'd be wasting your time and money with another gun.

Powerful, and light. Plenty of power for the weekend warrior, which is glad I bought the lighter one over the heavier 1/2" drive model.While you're at it, pick up a precision oiler if you don't already have one, the manual recommends oiling 3 places, at least 1 of which requires a precision oiler, and the other is covered up by the protective boot (although there are no holes there, so I don't know what the manual means).Oil your air tools! You can research on your own, but I found that the most popular seem to be Marvel Mystery Air Tool Oil and Lucas Air Tool Oil, both available on Amazon. I needed some quickly, so I just bought Kobalt at Lowes until my Marvel arrived and it works fine.Edit: This thing seems VERY oil hungry. Most people will recommend a few drops before and after use. I'm a weekend warrior so I do not use this for hours on end and oiled it before and every use. Recently it seized up on me. I took it apart and the hammers seemed very well lubricated. So I dumped a significant amount of oil in the inlet and let it sit. Plugged it back in and it spun up slow, then back up to normal speeds. After that I dumped even more oil in while in forward mode, then more oil for reverse just in case. Runs much better.TL;DR Use much more tool oil than normal.

all good and got it fast

5 stars only because 6 was not an option. This little impact is great. It's a huge time saver on everything from oil pans, to transmissions, to brakes, to engine work. In my line of work, time is money. I am a professional mechanic and I use my tools every day all day. Power, ergonomics, and durability are what I look for in my air tools. This thing has it all: I was taking lug nuts off with it day one, so it has more than enough power. It feels like a fraction of the weight of my co-worker's snap-on 3/8" impact and doesn't take as much effort to select forward and reverse or change the power setting so having used both tools all day, I can say there is less fatigue on my hands with the ingersoll, so I would venture to say it has the best in class ergonomics from what I've used. As far as durability, I have had the ir TiMax ½" impact for many years now, and I've abused it in unimaginable ways (including running it over with a 1 ton Chevy), and it just won't break. I expect this tool, being made of the same materials, will endure as much torture as its big brother. Did I mention it barely makes any noise? Quietest air tool I've ever owned.

I needed a powerful yet very compact impact for a difficult job (replacing spark plugs on an F150 Triton engine with very tight quarters on the rear cylinders.) YouTube tips suggested using a 3/8 impact. I already owned a 1/2" drive IR impact and love it. This new one was a little spendy (although a super price here on Amazon), so I was leaning toward going the cheap route and getting something from Sears. I'm sure glad I didn't! This thing is the smallest I've found, very light with the Titanium case, and has great power. All of the other reviewers are correct. This is a fantastic tool, and I never have buyers remorse when it's a quality item like this that I will undoubtedly get many years of use out of. My dad always told me to take care of my tools, and my tools will take care of me. This little impact with big impact performance is sure to do just that. Well worth the money even if you don't know what your next job for it might be. Oh, and the ergonomics and conrols on it are great!

Bought this to compliment my IR2135Ti impact.I can't get over how much quieter this is compared to the 1/2" version!Typical Ingersoll Rand quality. This is a great size. I can actually see myself using this more than the 1/2" version for more everyday car stuff. Not too heavy and has quite a punch for power.

I bought this tool here on Amazon in 2008. I have beaten the snot out of it until today, 3/8/2022. I finally managed to break it for good. The 3/8 square drive broke off of the anvil. It is a very powerful air tool and I am completely satisfied with it's performance and longevity. I am actually here to buy a replacement unit, It's that good. If you are considering this tool for professional or private use, Don't hesitate. It's great just buy it!

Buena potencia y buen precio.

I left my first Impact Wrench ,same as this one, out in the Shop. It was taken! (Grrrrrr!!) I liked this wrench so much that I replaced it with the same one. It is small, light ,powerful, and held up to working in a Freightliner dealership for a year. It does all that I ask of it. Also, having the direction control on the back of the unit is handy as well. More expensive than others I've seen, but worth it to me.

Love this gun!, as a tech at an import dealership this is my main impact, I almost never use my 1/2", this gun is powerful, easy to control and so compact and light you can get in the tightest spaces especially when combined with swivel sockets.

Been using this thing for 3 years now and it’s great! Noise is next to nothing, it feels pretty balanced in the hand, power isn’t crazy but nothing switch to a 1/2 can’t handle. Throw a boot over it and oil it after every use and this unit will last you a lifetime!

Awesome little tool. Did what i expected it to do and more. I see myself using this gun more then my 1/2inch model because of its decent power, light weight and super speed. Ingersol Rand make great products!

Very very powerful and fast. Fits in tight spaces. I have the 1/2” gun and used a friends 3/8”. Had to get my own. High rpm and responsive trigger for breaking loose and working loose fasteners.