Fielect Synchronous Motor AC 110V 2.5-3RPM Turntable Motor CW/CCW Direction 4W TYC-50 Double Flat Tapping Shaft

I had to modify the motor shaft to match the old unit. You can do this on a bench grinder. After I trimmed the shaft it works great.

Part arrived well before the scheduled date. It was an exact fit for the failed motor. My mechanical reindeer is moving again!

Mine works fine, but gets pretty hot if you run it for a while. If you need the motor to change direction, hold the shaft with pliers while it's running and it'll reset itself to run the opposite direction. The setting change stays even when you power it off until you force it to change it again.

I used this motor to repair a George Foreman "Baby George" rotisserie oven. It worked perfectly with some minor modifications. I carefully opened this replacement motor and replaced it with the shaft from the old motor which was much longer. It almost slot it perfectly, but the mounting "post" underneath it needed to be trimmed down which I accomplished with a sharp x-acto knife. I sealed the new motor back up and it mounted perfectly. All the mounting holes were in the same locations. Even though my rotisserie is over 10 years old, it's clear all these "synchronous" motors are still made the exact same way. Deducting a star because the new motor is of noticably lower quality than the old motor. The old motor has 2 metal gears and 3 plastic gears. The new motor has 5 plastic gears, no metal. Also the wires are thinner. For the price, I won't complain and I'm thrilled to have my oven working properly again. I don't expect it to last as long as the old motor, but I'm hopefully I'll get a couple of years out of it. If it breaks prematurely, I'll update this review but as of now, I can recommend this motor to repair your Baby George rotisserie if you're willing to do a little modification to it.

The media could not be loaded.  I used this motor to repair an animated reindeer motor. They do sell the complete reindeer motor too, but for less than ten bucks, this old one was up and running. The swap was pretty simple. Opened up the old motor case, cut the wires to the old motor and removed it. Wired in the new motor to the original wiresI cut, soldered the connections and used shrink tubing to protect the connections. Put everything back together and bingo, back in business. I had to use a smaller screw to hold on the crank that turns the reindeer head because this one was threaded different, but that was super easy too. In the photos, the new motor is the shinier one. Hope this helps.

Works. Ordered these several times when fans went out. Great company. Quality product. Fast shipping.

My DC motor that I used to rotate my lathe spindle was failing. I had high hopes for this motor. It ran silently and seemed to have good torque. I liked that it was 110 volt and had a shaft that was not in the center of the motor case, allowing me to rotate it to get it lined up exactly with the spindle. I finally got around to replacing the old motor with this one but within minutes of use it stopped rotating and acted like it had stripped its internal gears.

The motor was a replacement for similar one that failed. It fit the existing mounting perfectly. The shaft was a little long, but I was able to machine it to the needed length easily. The motor when running is very quiet. Overall, I'm very pleased with the result.

A tiempo, y lo que pedí

東芝製扇風機の首振り時に異音が出始めましたので交換しました。現品と同じ仕様の軸がありませんでしたので、軸高と 2面幅加工をされたものがマッチしたので購入しました。交換前のモーターは2面幅位置に孔が空いており首振りリンク樹脂部品とボルトナットで締結されていましたが組換えモーターにはそれがありません。(軸端にタップ加工されています)組換えてから現合わせで孔空けして再度ボルトナットで締結しました。また当分頑張ってくれそうです。写真1枚目と 2枚目が元のモーター、3枚目は交換完了後となります。

回転も良くちょうどよかった。

es una excelente opcion para un motor pequeño de bajas revoluciones

シャフトの形状/ネジ穴有無/径/長さ　色々な組み合わせが選べるので、誤発注なきよう！モノは問題ないです。価格の大部分は送料と割り切って下さい！