Supershieldz (2 Pack) Designed for Samsung (Galaxy S10 Plus) Tempered Glass Screen Protector with (Easy Installation Tray), (Full Cover) (3D Curved Glass) Anti Scratch, Bubble Free (Black)

Lasts a long time with minimal scratching. Installs easily without any trapped air pockets. Fingerprint reader can be a bit finicky, but does work. While it will likely shatter if phone is dropped on a hard surface, it does a good job of sacrificing itself to protect the phone screen.

I have used other screen protectors and they have air bubbles, don't go on straight and come loose due to the silicone case. This screen has an install appliance that easily assures a straight install. Nair bubbles at all. The only issue I had was with the fingerprint scanner. First off, you have to delete the old finger scans. To generate new scans I had to pass very hard many times. To unlock the phone now I must press harder than before. In my opinion this tradeoff is well worth it.

Post update: a few months after installing, a small drop caused the screen shield to pop off. Turns out the adhesive had given up the ghost. This is on top of losing access to the fingerprint sensor. Not impressed at all. I would take away the one star if I could. Updated: Biometric touch sensor neutered with this shield despite multiple attempts to reprogram. I can witness a half moon milky area on the touch sensor where it doesn't adhere. Don't waste your time or money. I've been guying Supershieldz due to previous positive experiences with the product with other phones. This particular screen causes issues with this phone but they can be worked around. Specifically, if you experience issues with the fingerprint sensor or screen response, try changing Settings -> Display -> Touch Sensitivity to increase the Touch Sensitivity setting for use with screen protectors (it's a toggle). Supershieldz should offer specific advice for this phone, but either I missed it or they did. The S10+ was the first generation to use an in-screen fingerprint reader and it has always been problematic.

As of this initial post, it's been a day and a half since testing it out. For the most part it feels nice and smooth and using the tool included was extremely helpful for aligning the protector. It's pretty easy to wipe off the thumbprints smudges and it's pretty flat on the native screen so you'll barely notice it. My only regret was not being careful at the very last second. Right when I was about to fully place down the screen protector I noticed some dust under it from when I was simultaneously peeling off the protective layer. And because I didn't like seeing bits of dust under it, I decided to slightly peel up the bottom part of the screen protector where the thumbprint scanner was just so I could give a quick wipe. And I have to say the adhesive is definitely solid because it took a bit of effort and whatever gentle care I could to slightly raise the screen protector, but unfortunately I managed to slightly crack the thumbprint area just from the light pressure of lifting part of the screen. It's not too bad but I'm thinking it's affecting the accuracy of my thumbprint scanner. And because I know how good the adhesive is I can't risk trying to lift the entire thing again to replace it with the second screen protector given. Because if I did I wouldn't be surprised if the protector cracked right in half, wasting half of what I paid for so soon . Again this is no fault to the product itself as it's pretty solid in every way except the thumbprint scanner. Everything has been properly aligned and flattened but the thumbprint scanner is the only thing that isn't 100%. I've wiped the area on top and registered my thumbprint at multiple angles so that the phone could recognize it regardless of how I placed it. I would give it an accuracy rating of 70- 75%. Most times it's fine and seamless but other times it's pretty annoying. While there is a slight crack on the thumbprint from my attempt to readjust, I don't think it's the main factor. I think that's just the trade-off from using a tempered glass protector compared to the film protectors. If the package itself came with a third screen protector I'd feel a lot more confident about redoing the whole thing. But for that risk and effort I don't think its worth it after spending almost 15 for two screens. It's only looking at the thumbprint scanner that really bugs me but everything else is fine. Which is why my advice to anyone else who orders this, take your time especially at the end of the installation process. If I could do it again I would but I've already placed everything and for the most part it looks great. If anything else develops maybe I'll give an update but for now I'll just have to deal with my own mistake. I do recommend anyone to buy this. This was for my Samsung Galaxy S10 Plus.

Today made me a true believer! I've had this phone protected with this for over a year now (also in the OtterBox case), but today... it fell from the counter and landed on its corner just right - and the front shattered... but NO! It was only the tempered glass!! I am so glad I ordered the 2-pack!! I was able to replace this amazing shield in just a few minutes. It easily peeled off to reveal my perfect phone screen. And after some struggle to get every dust particle off, it took mere seconds to set the new piece on top. I'm likely going to order my next 2-pack, since I don't plan on replacing my phone anytime soon. Hope my pic helps you see - this is a great product!

Finger Print reader doesn't work with this on unfortunately, but I knew the risk going in based on the other reviews. The instructions were very vague, but I managed to get it on. The tray system made it pretty easy to do. Zero bubbling and it seems secure. Time will tell for how long. *Update* Two weeks later the finger print reader started to be able to work again. I remade a second finger print and it works pretty much all the time now. Had a few drops from 5 Feet, screen's still protected. One thing that's odd is that I made 100% sure that it was clean when I placed it down, but little bity pieces of dust / dirt have been able to seem to squeeze underneath the screen.. Just enough to cause my OCD To trigger. All in all, not sure why the fingerprint sensor wasn't working but it fixed itself over time. Great inexpensive replacement to the screen that was provide by Samsung. I'd give it 4.5 stars if I could. Update* Replaced my first one because dust somehow managed to get underneath the protector after quite a long time, I had a second one so I thought why not? Goes on GREAT. This one didn't last one day though because it shattered after being hit with an elastic strap in my lunch box... Not very much force behind it. Finger Print reader wasn't working for that either... Couldn't really try to make a NEW print because then that wouldn't work. I figure having a glass screen protector over it without finger print is better than nothing over it... These seem to be the best you can find. S10+ is an old device now, so I really don't want to risk damaging it and being forced to get a new phone entirely. Still wish I could use the finger print reader, as the new protectors still don't work with it at all. The first one I applied originally seemed to work after being applied for a while, so lets hope it magically starts working down the road for me again.

Upgraded to a newer Samsung because my S6 Edge+ no longer supported certain apps that I needed. Immediately purchased this and a hard case, and covered my phone in protection. This is my THIRD purchase from this company (and you get 4 screen protectors in each bundle). One bundle was given to my husband, one to our Second Son, and one for me. THIS SAVED MY PHONE. I dropped my phone, and the hard case saved the case, but the screen cracked. I was bummed. Honestly thought, "Well, all right, it's just the corner that's cracked." Wrong! It was the Tempered Glass Screen Protector that was cracked. An overnight order had a new bundle delivered to me the following day, and in less than five minutes - I had removed the cracked screen and easily applied a brand new Tempered Glass Screen Protector onto the flawless screen of my phone. I'm sold on this product. DEFINITELY a loyal customer. HIGHLY RECOMMEND THIS PRODUCT.

I have ordered this product for the first time & I am pleased with it.

Mon Samsung S10+, ce protecteur d'écran Supershieldz est parfait. J'ai mis une photo avec les dimensions exactes du kit qui correspondent exactement à celles de mon cellulaire. Je ravis de mon achat, mon cellulaire a déjà 4 ans, je l'aime toujours autant, la batterie n'a pas faiblie, il répond toujours aussi bien à mes besoins, aucune raison de le remplacer, c'est pour cela que j'ai racheté des protecteurs d'écran, le dernier étant devenue moins beau. Aussi le nouveau protecteur est très sensible au touché. Une cliente qui recommande avec grand plaisir ce Supershieldz.

Excelente productos, fácil de colocar, material resitente

fantastic! the included installation tray makes placing the screen protector on a breeze. zero bubbles. perfecto!

This screen protector does NOT stick to your screen. It sticks to the edges only. - The protector leaves a gap between your screen and itself so typing is hit and miss and you can feel the protector move when you press on it - And the glare is brutal I regret my purchase.