PlanoMolding 932001 Portable Stow Away Rack Organizer with Cover, Red

I just got this and like it so far. No damage in shipping but a 2nd strip of tape for such a tall and wide box would have been more secure.Here are some details of the unit that I received - note that shipped units could vary over time?, hence the lack of details or photos in the product description.= Drawers OverallThree larger drawers (14"x8.5x2) plus two smaller drawers (8"x4.5x1).For my description here, view the greater drawer dimension (drawer lid hinge at back), as left to right (first row towards you, last row away from you).= 3 Larger drawersEach of the 3 larger drawers has 4 rows and 1" interval divider slots in each row for 11 dividers (12 compartments) - but only 5 removeable dividers (of potential 20 total) are provided for each drawer row. Total with provided dividers, 4 rows of 6 compartments = 24 total (2"x2") compartments - out of a potential 36 (2"×1") compartments with additional insertable dividers (contact seller for more).= 2 smaller drawersEach of the 2 smaller drawers (mounted at the top) have 6 colums (viewed with lid hinge away from you) with NO provision for insertable dividers. 1 of these 2 (oddly) smaller drawers does have the 2 end columns split in half with a fixed divider.Therefore 1 of the smaller drawers has 6 compartments and the other (oddly) has 8 (since the 2 end columns have fixed dividers.Out of the box you have 3x24 + 8 + 6 = 86 compartments.With additional divers in the 3 largers drawers, you could have 3x36 + 8 + 6 = 122 compartments.= My usageI intend to use this for holding M2, M2.5 and M3 standoffs, spacers, screws and nuts for PCB mounting. If I like it may get another for holding MCUs, sensors, buttons, headers, etc.The cover on the face and the mokded handle, that area between the two top narrow drawers, seems nice.I hope these details fill in the gaps with some of the other reviews and answers to question.I'll update this review if I discover any other info, good or bad.

EDITED, 12/25/2020:I have an old Plano-Molding-974-StowAway (NO LONGER MADE!?) that has 4 full-sized bins in it. I bought this hinged one only because it was a few dollar less than the 964, WHICH I mistook for an upgraded version of the 974 (964 is smaller than 974). This one 932001, while similar, has less storage space. A carrying handle on top necessitates the inclusion of only 3 full-sized snap-lid bins. Two smaller bins are located either side of the handle. Anything you can put in the small bins will surely fit in the large ones.Thus, the carrying handle and the hinged lid that keeps the bins from sliding out, are the only advantages of this style.There are quite a few dividers for the bins; without counting, I would say about 25 for each bin. My 964 is very old, and it seems the full-sized bins are of the same type, I checked, and they will fit either one. Anyway, the old 964 I have has about half the slots for placing dividers as this one. I assume both new ones will use the same bins. For my purpose, I would have preferred a OLDER 974, if it were available!EDIT (12/25/2022): I use this for storing LEGO minifigs; with every divider slot filled in all 3 3700 boxes, the cells are wide enough to put 5 minifigs one in front of the other (4 if wearing air tanks). Oh, not enough dividers were included, had to email PLANO, & request more.The PROLATCH feature does intrude into the 1st row of cells, such that only 9 divider slots; thus, 10 cells, 2 twice the width of others. 11 in the other three rows; thus, 12 cells.For my current purpose, this is a very nice fit.

I'm using this to organize a lot of screws and other small parts. The individual cassettes are easy to configure with different size compartments with the included dividers. The cassette lids are held by two plastic snaps which hold very securely. Three large and two small cassettes are provided and are easily accessed by opening the cover. The main cover is easily opened, but not held with a separate snap, which I would have preferred. It does its job well, however. No handle, but there's a recess on top for picking it up. No handle to fall off or break. The only other small gripe is that the dividers for the compartments must be cut apart with a knife, they can't be broken off by hand. They do fit securely in the cassettes with rounded edges along the bottom to match the curve, and the edges of the dividers are flared for extra strength as they slide into their slots. I wish they had a locking feature to hold them down because if you accidentally pull one out while picking out the contents, you'll merge everything and have to clear it out and start over. The dividers are easily removed, even if accidentally. I suppose some glue or calk could be used to hold them in place. I definitely would recommend this.

Inherited husband’s old Plano box (he had a stroke), used it for organizing embroidery bobbins, but eventually outgrew space! This is nothing like my good old box - but it’s an economical substitute, & easier to carry around than the big box plus 2 -3 extra single storage boxes of various sizes.

Well built product. keeps small items organized and secured.Bins QTY 3 Plano 3700Bins QTY 2 Plano 3450

A good value and quick delivery!

Très belle qualité. Très fonctionnel Grande capacité. Le gros bémol, c'est le prix, d'autant que je constate que depuis mon achat du mois d'avril, l'article à augmenté de 8,58 euros c'est beaucoup !!