BowmasterG2 Standard Split Limb L Brackets

I bought the G2 and wondered if it would cover my Bear Instinct limbs. Just to be safe I bought these for the wider limbs, and I was glad I did. they worked great, and I did not notice enough flex to make a bit of difference. that being said I confess I was pretty tense screwing down on that bow, but the fact is the G2 was solid, these brackets were solid, and I got the string replaced without any noticeable damage to the G2, these extra wide brackets, or the bow. Furthermore, I shot the bow this evening, and it functioned perfectly. I would definitely recommend these brackets for their quality, function, and just to make sure you can fit your G2 to a variety of bows. Who knows, the string you change may just be your buddy's, and it may make the difference between staying out, or going back to the house.

need these when diy bow press by bowmaster,i changed my string and cables on bear bow , install peeps,D lopps. its easy to use.

I'm sure they work, but did not fit my split limb bow... but I have a gearhead t24 and it does not look like your average compound bow

Very easy to use it didn't like that they don't have a kit with bow press and brackets but oh well.

These work excellent. Mathews Creed 30” axle to axle, 70# limbs. I called Mathews and was told they do not recommend using any portable press, “only a press that puts pressure on the limb tips should be used”. After calling the manufacture to better understand how these work I learned that the limb tips is excatly where these put pressure. I did have to slightly bend the hooks further in with vice grips but they grab the Bow fabulously. It’s rock solid for sure. I changed my string and cables the other night in about 10 minutes

Fit my bear g2 like a charm using the bkwmaster portable bow press.

Purchased these split limb brackets to go along with the  Bowmaster Press G2 Portable Bow, Silver . These brackets are built well and are very sturdy. I was able to remove my strings and cables in no time at all and was not worried at all about the brackets slipping off the limbs.Definitely recommend as a must have accessory to the Bowmaster Press!

Put this on my Hoyt to press it. It come off and the only thing keeping my bow from fully decompressing is the control cable, and my limb driver cord. I returned it. I give it 5 stars because it holds the bowmaster very well, and if you have a non Hoyt bow this will probably do the trick.

Llegó e ibmediatamente lo utilicé con mi bow master rn mi arco. Este funcionó excelente, solo hay que tener conciencia de estar colocándolo centrado y firme sobre los ramales o puede haber un accidente. Al momento de tensar hay que estar observando que no se pdoruzcan deslizamientos.

These work great with the bowmaster press. They fit nice and snug and don't move at all. Easy to put on and take off again to check your bows specs.

Does what it's supposed to do.

Easy to use. Could not make them slide off beyond parallel limbs. Used on a PSE full Throttle. Good product!

Great addition to the Bowmaster G2 portable bow press. These are to be used with split limb bows