Pro 2X Speakon to 1/4" 50 Ft. True 12 Gauge Wire AWG DJ/Pro Audio Speaker Cable, Pair

The big thing is - these work. They have no distortion, but they're lacking in build quality.Specifically the speakon connectors are pulling away from the wire, so there is some visible exposed wire. The connector on one side is beginning to dismantle itself, which is disappointing.That said, it's an easy fix and likely will not impact performance unless the latching mechanism breaks. It just shouldn't have been an issue frombthe getgo.All things considered though, it's a great value and I knew I was buying a cheaper product.

Works as intended

good! I love it! Thanks

No problems. Work Great! Great Price. These are installed on an in-house PA so they are not going through the rigors of setting up and tear downs. However, from the quality, I would see NO issues of these having any problems in that type of use.

Its was a great item too buy very worth it.

Some reviewers had problems, I did not. These cables can get pricey so I jumped on these. I figured if they were not soldered right I would just do it my self, but I did not have to. I would order again

Given the price for these cables, I wasn't expecting top-of-the-line name brand cable & connectors. To that end, my expectations were met (these are not top of the line), but again, considering the price for two cables on this purchase was about 1/2 the price of a decent name brand cable (aka each cable here cost about 25% of a decent name brand equivalent), everything would have met my expectations for at least a 4 star review.However.. What was not acceptable was out of the 4 I ordered, each one has a serious issue. Ranging from miswired on one end compared to the other (it doesn't matter which conductor - black or red - you use for positive or negative, as long as both ends are wired the same polarity, but you can't just wire either end either color combination?!), screws that were never tightened and wires not fully inserted in to the connector, and cold solder joints.Come on Ignite Pro, you could have delivered a product that satisified the casual masses, but missed the last 10% of delivering the product, which IMO makes these of no value. The tiniest bit of QC would have caught all of these issue.I managed to rebuild these and they now perform fine for the person I bought them for, but otherwise these would have been returned, hopefully before they caused a problem like burning out an amp or driving a speaker cone backwards from polarity mismatch.

TL;DR: Cables were wired incorrectly, causing permanent damage to amp and speakers. The internal wires were loose as well, and the speakon connection lock is weak. MAJOR quality control fail.Me: a pro audio engineer with a background in electronics. I know what I'm doing.Technical info: First time I used these, all night we could only get sound out of one monitor. Found out it was because the speakon end was loose and wasn't locking properly into the port. I had to twist the wire around to get it to stay.Second time I used them, I was getting the right channel out of both monitors, and the left channel out of neither. Mysterious, but seemed like a poweramp problem, so I spent hours inside the amp only to verify that it was working properly. On a whim, opened up the speakon ends of one the cables only to have one of the the screwed-in wires slide right out. The screw hadn't been tightened!! Next thing I discovered was that the wires were wired to the incorrect poles on the inside of the speakon connection (2- and 2+ rather than 1- and 1+). Because most amps can optionally use all 4 poles to output both channels into one cable, that meant that the monitor with the defective cable had been getting the incorrect channel. Furthermore, it meant that all night I was using a 4ohm load where I though it had been an 8ohm load, which is very bad for the amp.THIS IS NOT A MISTAKE CABLES SHOULD EVER MAKE. If the connections had been wired incorrectly in a different way, it could have ruined the speakers or potentially even CAUSED ELECTROCUTION OR DEATH!I see that most reviewers haven't had trouble with these cables, but a lapse in quality control like this is serious when dealing with live electricity and expensive equipment. If I were you, I'd steer very, very clear of these until they can improve their quality control. Literally, please, unless you're a professional gambler, buy anything but these.